Professional Documents
Culture Documents
Content
Chapter 1 Preface……………………………………………………………..3
1. Safety instruction……………………………………………………………………3
2. Package………………………………………………………………………………3
Chapter 5 Specification………………………………….………………..….10
2. Menu function………………………………………………………………………14
1). File…………………………………………………………………………………………..14
2).Tools…………………………………………………………………………………………14
3).About………………………………………………………………………………………..14
2
Chapter 1 Preface
APC870 digital cinema audio processor is audio processing equipment for digital cinema. The system adopts
latest way to decode multiple digital cinema audio format, and to process the output digital audio signal using
DSP, thus to meet the requirement of 6 channel (or 8 channel or 16 channel) of digital cinema stereo: L, C, R, Ls,
Rs, SW, BLs, BRs ,L Low, L Mid, TLS, R Low, R Mid, TRS, C Mid. It is very easy to set the speaker cabinet
system, and is very suitable for various cinemas.
The suitable PC operation system: Windows2000, Windows 2003, Windows XP, Windows Vista, Windows 7.
1. Caution
☆ Please read the manual carefully and keep it for future reference.
☆ Power supply: AC 220V±10 ﹪, 50~60Hz. Please check the local voltage is correct.
☆ Please keep good ventilation. Temperature range 0~40℃,humidity range 20﹪~80﹪.
☆ Keep the device away from heat source. Please don’t use broken power cord or pile other objects on it.
☆ Please do not open the device. There is no part for user to repair.
☆ Keep the device away from rain and moisture.
☆ Keep your hands dry while pluging or unplugging the power cord.
2. Package
1) Open the package and check if you have the following items.
3
3. Function and features
☆ 25 Pin D connector for input and output supports 1.3K and 2K projector.
☆ Supports bypass and two way and three way operation modes to meet the requirement of large/mid/small
cinema projects.
☆ 8 channel AES-EBU digital inputs.
☆ 14 channels have pink noise generator and the connectors to input pink noise which are convenient for
☆ The input signals can be inter-switched. Each channel has fade-in/fade-out function.
☆ Can control the gain and crossover and EQ of 8 digital cinema channels.
☆ Convenient main interfaces; the operation mode of multiple windows; multiple functions and channels
operate simultaneously.
☆ To reduce the repeated operation, multiple inputs and outputs can be adjusted simultaneously.
☆ 31 band graphic EQ of free crossover; each band has a control;parameters can be adjusted directly.
☆ 16 universal HI/LOW pass filter modes; Hi/Low pass filter accurate to 1Hz in the range of 20Hz ~ 22kHz.
4
1). Monitor speaker: used to monitor the signal of left, right, middle, left surrounding, right surrounding channel.
Press this key and the key LED lights up. The digital input signal outputs after being amplified.
Press this key and the key LED lights up. The optical input signal outputs after being amplified.
Press this key and the key LED lights up. The coaxial input signal outputs after being amplified.
Press this key and the key LED lights up. The analog input signal outputs after being amplified.
Press this key and the key LED lights up. The non-synchronic input signal outputs after being amplified.
Press this key and the key LED lights up. The microphone signal has been connected.
Press this key and the key LED lights up. The signal output to monitor speaker.
10). Mute
Press this key and the key LED lights up. The system has been muted.
Used to connect with PC and set the audio signal processor and upgrade the system.
12). Main
Used to control the output volume. It should be set to 4.2 position in normal condition.
13). SD port
Insert a SD card into the port. APC870 can save data into the card and read the data in the card.
5
Chapter 3. Rear Panel
1). Fan
Two RCA connectors are convenient to connect with CD/DVD or other dual channel audio signal source. L
is used to connect with left channel or left surrounding channel. R is used to connect with right channel or
6
6). DIGITAL INPUT
It supports 4 channel AES-EBU digital movie signal input of 1.3K & 2K digital projector. Refer to the
:
L/R- 2 L/R+ :14 G:1
C/SW-:16 C/SW+ :3 G:15
LS/RS-:5 LS/RS+ : 17 G:4
BSL/BSR-:19 BSL/BSR+: 6 G:18
It supports 1 channel DB-25 analog movie signal input. Refer to the following figure for the pin connection.
L+ :2 L- :14 G:1
LE+:16 LE- :3 G:15
C+:5 C- :17 G:4
RE+:19 RE- :6 G:18
R+:8 R- :20 G:7
LS+:23 LS- :10 G: 9
RS+:24 RS- :11 G:22
SW+:25 SW-:12 G:13
It is the same as that of 6 which is mentioned above, but select one of the two input connectors.
7
11). MIC input
The balanced microphone XLR input, Pin 1 ground, Pin 2 +, Pin 3-.
L+Mid:2 :14
L- Mid G:1
R+Low:8 R- Low:20 G: 7
C+ Mid:5 C- Mid:17 G: 4
TLS+:23 TLS-:10 G:9
C+ Low:24 C- Low:11 G:22
L+ Low:16 L- Low:3 G:15
R+ Mid:19 R- Mid:6 G:18
TRS+:25 TRS -:12 G:13
Balanced 25 Pin connector. Refer to the following figure for the pin connection.
:
L+ 2 :
L- 14 G 1 :
:
R+ 8 :
R- 20 G 7 :
:
C+ 5 :
C- 17 G 4 :
Ls+:23 Ls-:10 G:9
Rs+:24 Rs-:11 G:22
BSL+:16 BSL-:3 G:15
BSR+:19 BSR-:6 G:18
SW1+:25 SW1-:12 G:13
8
Chapter 4 System Connection
9
2. Operation
1). Input the movie audio signal input the equipment and select the relative output channel. Adjust the gain to
2). Connect 8 channel speaker cabinets. The speaker cabinets can be 8 full range speaker cabinets, or can be 8
3). Use the USB cable to connect with PC. Open the software to adjust the system parameter.
4). If the user is satisfied with the setting, please save the data and copy it. User can make comparation after
misoperation.
Chapter 5 Specification
10
Chapter 6 Software Operation
11
Double click this icon and it displays the operation interface as below.
1. Connection with PC
Use USB cable or network cable to connect the equipment with PC. Turn on the equipment and start the software.
The software will automatically find and connect with the equipment. If the connection can not finish
automatically, user can connect manually. Select the connection way first.
Connect PC with APC870 USB port. Open the APC870 software. Select the USB connection way as below:
12
Click Connect. The status indication turns red into green. This means the USB connection successful.
Click Connect. The status indication changes red into green. This means the network connection is
successful.
13
Caution: during operation, do not unplug the connection cable, otherwise the software does not work.
Solution: close the software and reconnect the cable, then restart the software.
2. Menu function
1). File
The file menu includes open, save as, recently, quit as the figure below:
2). Tools
14
3. Controls and operation
1). Input Select
: Select the signal input channel and set output signal level, and display output signal level
simultaneously.
b. pull the scroll bar to change the signal level. Accuracy: 0.1. click MUTE to mute.
c. It displays the output signal level of each channel at real time as the figure below:
(1)
a. Preset
Power on mode:
15
Mute Duration:
: Set the time between mute and play.
Mute Main Bsl/Bsr Output Pins) :enable the mute of left back surround/right back surround.
Fader Preset:
: enabled.
Channel Assignment
16
Left /Right/Center means left/right/center channel input. LFE means the LF input channel. Left Surround
/ Right Surround means left channel surround and right channel surround separately. Back Srnd Left
means back left channel surround. Back Srnd Right means back right channel surround.
When the decoder is used for two way application, Left /Right/Center channel input signal is crossovered.
Left-1 and Left-2 mean two way left channel. Right-1 and Right-2 mean two way left channel. Center-1
Click CONTINUE to enter into the output channel setting (at this time the normal audio output
Level:
17
Range: -12dB ~ +12dB
Channels:
: channel setting.
Active Channel:
Bass:
,
: level range -15dB ~ +15dB frequency range 20Hz ~ 22kHz.
Treble:
,
: level range -15dB ~ +15dB frequency range 20Hz ~ 22kHz.
High:
,
: level range -15dB ~ +15dB setting range 8kHz ~ 22kHz
Mid:
,
: level range -15dB ~ +15dB setting range 2kHz ~ 8kHz
Low:
,
: level range -15dB ~ +15dB setting range 20Hz ~ 500Hz
Active:
18
EQ:
: parametric EQ.
When select L/C/R channel, click EQ and select LFE/Ls/Rs/Bsl/Bsr, there are the setting as below:
~22000Hz, accuracy 1.
Freq: adjustable frequency range: 20Hz
En:enable
Software Update:
19
20