7117123, 10:51 AM
17117123, 10:51 AM
TO
AAG
WideGap 350
Wide-gap plate heat exchanger
Applications.
\Wide-gap plate heat exchanger for general heating, cooling
and heat recovery of media containng fibres and coarse
panicles. In adttion the wide-gap channels are sutaba for
ighly viscous Mids.
Standard design
“The plate heal axchangor consists ofa pack of cortugatod
metal pates wth portholes forthe passage ofthe two Rid
between which eet transi wil take place.
“The plete pack s assembled betweon a fixed fame plate and
a moveble pressure pate and compressed by tightening bots.
The plete ar tte with a gasket, which seals the nterplate
channel and directs the ids nto alterate channels. The
ruinber of petes is determined by the flow rate, physical
properties ofthe fids, pressure crop and temperature pro
‘gram. The plate comugations promote fuid turbulence and
support the platos aganstcifretial pressure.
“The WideGap plates feature coarse corrugations with a
cross-section width between 8 and 17 mm 5/16" and 11/16")
bbetwoen the plates, and have fat non-corrugatad portholes
for the product channels. The WideGap plate heat exchanger
can be used in four diferent configurations, wide-gap to super
wide-gan.
“The frame plate and the pressure plot are suspended fom WideGap 380
an upper carrying bar and located by a lower guiding bar,
both of which are fixed to @ support column, ‘Wpical capacities
Connections are localad in the rame plate of esther or both Liquid flow rate
‘lds make more than a single pass wthin the unt. inthe Up to 500 kas (8000 USGPM), depending on media,
‘ram and pressure plates pormited pressure drop anc! temperature program.
Piste types
\WrideGap 9505, WideGap 250X
Frame types,
FM FG
287117123, 10:51 AM
3