Professional Documents
Culture Documents
Carmi, IL 62821
Tel: +1 (618) 382 2525 Fax: +1 (618) 382 3610
E-mail: elastec@elastec.com
Web Page: www.elastec.com
When looking at installing an oil skimmer in a tank, separator or catchment pit there are multiple factors that need to
be considered to ensure a successful installation. Please complete this questionnaire.
Dimension A (Average):
Company: Phone:
Dimension D:
Dimension E:
Constant Fluctuating
Open Closed
Pumping - oil viscosity, flow rate and suction lift will determine the pump size and location. The
suction lift will determine the location of the pump (on the skimmer or side of tank)
Site Conditions
Air Supply - There will need to be sufficient air to
Air Available: psi / bar cfm / m minute 3 ? run the skimmer and pump, alternatively electric
hydraulic powerpack can be supplied.
Air Quality:
Drive - Is electric power available? What are the explosion
Power Available: volts HZ Phase ? proof / electrical standards required? Consider location of
the power source in relation to the skimmer.
Standard of Motor Enclosure:
Usage - How often will the skimmer be operated? Service intervals and
Anticipated Use: Hours per Day
? spares requirement may be adjusted accordingly.
Oil - what type, quantity and viscosity that has to be
Volume of Oil to be Recovered: per Day
? recovered on a regular basis?
Effluent pH:
Is This Skimmer for Petroleum Products or F.O.G. (Fats, Oils & Grease):
Fats Oils and Grease (F.O.G.) can potentially
Type and Quantity of Grease or Fat: ? be recovered with our specialized system
(requires water injection).
Is Fresh Water Available?
000-MKT-SL-195
REV#3