Professional Documents
Culture Documents
8. If point A is in equilibrium under the action of the applied forces, the values of
tensions TAB and TAC are respectively
(A) 520 N and 300 N (B) 300 N and 520 N (C) 450 N and 150 N (D) 150 N and 450 N
9. A long thin walled cylindrical shell, closed at both the ends, is subjected to an internal
pressure. The ratio of the hoop stress (circumferential stress) to longitudinal stress
developed in the shell is (A) 0.5 (B) 1.0 (C) 2.0 (D) 4.0
10. The state of stress at a point under plane stress condition is Sxx = 40 MPa, Syy = 100
MPa and Sxy = 40 MPa, The radius of the Mohr’s circle representing the given state of
stress in MPa is (A) 40 (B) 50 (C) 60 (D) 100
11. For a circular shaft of diameter d subjected to torque T, the maximum value of the shear
stress is
(a) 64T/πd3 (b) 32T/πd3 (c)16T/πd3 (d)8T/ πd3
12. The total area under the stress-strain curve of mild steel specimen tested upto
failure under tension is a measure of
(A) ductility (B) ultimate strength (C) stiffness (D) toughness
13. A tourist covers half of his journey by train at 60 / km h, half of the remainder by bus at
30 / km h and the rest by cycle at 10 / km h. The average speed of the tourist in km/h
during the entire journey is (A) 36 (B) 30 (C) 24 (D) 18
14. Which one of the following options is the closest in meaning to the word given below?
Mitigate
(A) Diminish (B) Divulge (C) Dedicate (D) Denote