Professional Documents
Culture Documents
Catalogo de Rejillas
Catalogo de Rejillas
Floor Drain ACO 10” Hygienic Floor Drain Adjustable – horizontal outlet 34
Flow rates and construction heights Flow rates and construction heights 53
15
Introduction
Hygienic design
Hygienic design
ACO hygienic drainage fulfills the most ACO Hygienic Floor Drain features:
stringent hygienic requirements to § Full drainability
prevent bacterial contamination. We apply § Internal radii equal or larger than
hygienic design principles reserved for food 1/8 inch (3 mm)
processing equipment (EHEDG document § Hygienic joints
No. 8, 13 and 44) to the floor drain design § Edge infill
and NSF/ANSI 3-A 14159-1-2014. § Stainless steel grade min. 304
according to AISI
§ Fully pickle passivated
ACO Floor Drain
Grates
Hygienic slip-resistant grates available.
Hygienic joints
Deep-drawn body ensures smooth
contours, eliminating crevices that
can harbor dangerous bacteria.
Full drainability
Dry sump design is completely
drainable - eliminating standing
water, smells, microbial
growth and potential chemical
hazards.
www.acobuildingdrainage.com
16
Introduction
System overview
System overview
ACO Hygienic Floor Drains are available Fixed height floor drains are convenient
in a number of versions featuring different and free-standing units which are suitable
grates, sizes and outlet diameters for concrete, resin or tiled floors.
to suit various applications and flow
requirements. Adjustable floor drains can be installed
either with a floor drain top or ACO Trench
The floor construction and depth, Drain (see page 54) in most flooring
1 1
2 2
3
6
4
7
4
8
1 Grates
2 Silt basket
3 Optional foul air trap
4 Standard foul air trap support
5 ACO Floor Drain body - horizontal outlet
9
6 Floor Drain top
7 Friction ring
8 ACO EasyFix leveling feet
9 ACO Floor Drain body - vertical outlet
17
ACO 8” Hygienic Floor Drain
Fixed height – vertical outlet
Product information
A ixed-height loor drain can be § Hygienic design following EHEDG
speciied as point drainage in areas where document No. 8, 13 and 44
waterproofing is independent of the floor and NSF/ANSI 3-A 14159-1-2014
drain body. § Available in AISI 304 or 316L grades of
stainless steel
Floor drains can be combined with § 2" or 4" Sch 10 outlet options
different grates depending on required § Floor Drain top frame size: 8" x 8"
load class. § Wide range of grates available including
a slip-resistant solution
ACO Floor Drain
Items shown with the NSF Mark have been tested and Certified by NSF International.
Product data
2”
Ø2.37 [60] 8” x 8”
Ø5.61 [142] Sch 10
[200 x 200 mm]
[60 mm]
7.87 [200]
5.37 [136]
0.98 [25]
8.64 [220]
4”
Ø4.5 [114]
8” x 8”
Ø5.61 [142]
Sch 10
[200 x 200 mm]
[114 mm]
www.acobuildingdrainage.com
Grates for Floor Drain top 8” x 8” Page 25 Accessories for ACO 8” Hygienic Floor Drain Page 28
18
ACO 8” Hygienic Floor Drain
Fixed height – horizontal outlet
Product information
A ixed-height loor drain can be speciied § Hygienic design following EHEDG
as point drainage in areas where document No. 8, 13 and 44
waterproofing is independent of the floor and NSF/ANSI 3-A 14159-1-2014
drain body. § Available in AISI 304 or 316L grades of
stainless steel
§ 2" or 4" Sch 10 outlet options
Items shown with the NSF Mark have been tested and Certified by NSF International.
Product data
2.5 [64]
5.49 [140]
0.98 [25]
Ø5.61 [142]
2”
Ø8.79 [223] 8” x 8”
Sch 10
[200 x 200 mm]
[60 mm]
7.87 [200]
5.49 [140]
0.98 [25]
7.07 [180]
ø4.5 [114]
Grates for Floor Drain top 8” x 8” Page 25 Accessories for ACO 8” Hygienic Floor Drain Page 28
19
ACO 8” Hygienic Floor Drain
Adjustable – vertical outlet
Product information
Adjustable Floor Drains can be combined § Hygienic design following EHEDG
either with an ACO Floor Drain top document No. 8, 13, 44
or ACO Trench Drain in most flooring and NSF/ANSI 3-A 14159-1-2014
constructions (see page 58). § Available in AISI 304 or 316L grades of
stainless steel
The adjustable solution enables height and § 2” or 4” Sch 10 outlet options
rotational adjustment of connected floor § Floor drain body with location flange
drain top or channel. or integrated membrane flange for
mechanical clamp
ACO Floor Drain
Items shown with the NSF Mark have been tested and Certified by NSF International.
Product data
7.66 [195]
2”
Ø13.55 [344]
4.47 [114]
7.74 [195]
Ø2.37 [60]
2”
5.61 [142]
Mechanical
Sch 10
clamping flange
[60 mm]
www.acobuildingdrainage.com
Grates for Floor Drain top 8” x 8” Page 25 Accessories for ACO 8” Hygienic Floor Drain Page 28
20
ACO 8” Hygienic Floor Drain
Adjustable – vertical outlet
7.37 [187]
4”
Ø13.55 [344]
4.18 [106]
7.37 [187]
Ø4.5 [114]
4”
5.61 [142]
Mechanical
Sch 10
clamping flange
[114 mm]
Items shown with the NSF Mark have been tested and Certified by NSF International.
Grates for Floor Drain top 8” x 8” Page 25 Accessories for ACO 8” Hygienic Floor Drain Page 28
21
ACO 8” Hygienic Floor Drain
Adjustable – horizontal outlet
Product information
Adjustable Floor Drains can be combined § Hygienic design following EHEDG
with an ACO Floor Drain top or ACO Trench document No. 8, 13, 44
Drain in most flooring constructions. and NSF/ANSI 3-A 14159-1-2014
§ Available in AISI 304 or 316L grades of
Adjustable solution enables height and stainless steel
rotational adjustment of connected floor § 2” or 4” Sch 10 outlet options
drain top or channel. § Floor drain body with location flange
or integrated membrane flange for
Floor Drains can be equipped with mechanical clamp
ACO Floor Drain
Product data
Ø5.61 [142]
2”
8.79 [223]
With location flange Sch 10
[60 mm]
Ø13.55 [344]
4.3 [109]
Ø5.61 [142]
8.79 [223] 2”
With mechanical
Sch 10
clamping flange
[60 mm]
www.acobuildingdrainage.com
Grates for Floor Drain top 8” x 8” Page 25 Accessories for ACO 8” Hygienic Floor Drain Page 28
22
ACO 8” Hygienic Floor Drain
Adjustable – horizontal outlet
3.63 [92]
Ø5.61 [142]
4”
Ø4.5 [114]
9.58 [243]
Ø13.55 [344]
4.3 [109]
5.88 [149]
Ø5.61 [142]
4”
9.58 [243]
With mechanical
Sch 10
clamping flange
[114 mm]
Items shown with the NSF Mark have been tested and Certified by NSF International.
Grates for Floor Drain top 8” x 8” Page 25 Accessories for ACO 8” Hygienic Floor Drain Page 28
23
ACO 8” Hygienic Floor Drain
Floor Drain top
Product information
Floor Drain top is used in conjunction with § Hygienic design following EHEDG
the adjustable Floor Drain. document No. 8, 13, 44
and NSF/ANSI 3-A 14159-1-2014
Floor Drains can be combined with § Available in AISI 304 or 316L grades of
different grates depending on required stainless steel
load class. § Floor Drain top frame size: 8” x 8”
§ Wide range of grate options available
covering different load classes
ACO Floor Drain
Items shown with the NSF Mark have been tested and Certified by NSF International.
Product data
Ø4.9 [125]
8” x 8”
www.acobuildingdrainage.com
Grates for Floor Drain top 8” x 8” Page 25 Accessories for ACO 8” Hygienic Floor Drain Page 28
24
Grates
ACO 8” Hygienic Floor Drain
Product information
A variety of grates are available depending § Hygienic design following EHEDG
on application and required load class. For document No. 8, 13, 44
applications with high hygienic demands, a and NSF/ANSI 3-A 14159-1-2014
Ladder or Cast grate should be selected. § Available in AISI 304 or 316L grades of
stainless steel
§ Grates fit Floor Drain top: 8” x 8”
Items shown with the NSF Mark have been tested and Certified by NSF International.
A
6.61 [168]
A
6.61 [168]
*Grates fully hygienic according to EHEDG document 8, 13 and 44 and NSF/ANSI 3-A 14159-2014.
ACO 8” Hygienic Floor Drain Page 18 Accessories for ACO 8” Hygienic Floor Drain Page 28
8” Floor Drain top Page 24
25
Grates
ACO 8” Hygienic Floor Drain
6.61 [168]
ACO Floor Drain Grates
A
6.61 [168]
A
6.61 [168]
www.acobuildingdrainage.com
ACO 8” Hygienic Floor Drain Page 18 Accessories for ACO 8” Hygienic Floor Drain Page 28
26 8” Floor Drain top Page 24
Grates
ACO 8” Hygienic Floor Drain
6.61 [168]
6.61 [168]
B
Ø8.78 [223] □ □
8.86 [225]
0.98 [25]
Ø3.94 [100]
□6.61 [168] □ □
ACO 8” Hygienic Floor Drain Page 18 Accessories for ACO 8” Hygienic Floor Drain Page 28
8” Floor Drain top Page 24 27
Accessories
ACO 8” Hygienic Floor Drain
Ø5.59 [142]
AISI 304 416900
1.77 [45]
5.59 [142]
www.acobuildingdrainage.com
Product information
A fixed-height Floor Drain can be specified § Hygienic design following EHEDG
as point drainage in areas where document No. 8, 13 and 44
waterproofing is independent of the floor and NSF/ANSI 3-A 14159-1-2014
drain body. § Available in AISI 304 or 316L grades of
stainless steel
§ 3” or 4” Sch 10 outlet options
Items shown with the NSF Mark have been tested and Certified by NSF International.
Product data
9.84 [250]
1.18 [30]
7.82 [199]
11.01 [280]
3”
Ø3.5 [89] 10” x 10”
Ø6.18 [157] Sch 10
[250 x 250 mm]
[89 mm]
Grates for Floor Drain top 10” x 10” Page 37 Accessories for ACO 10” Hygienic Floor Drain Page 40
29
ACO 10” Hygienic Floor Drain
Fixed height – vertical outlet
9.84 [250]
1.18 [30]
7.82 [199]
11.01 [280]
4”
Ø3.5 [89]
10” x 10”
Ø6.18 [157] Sch 10
[250 x 250 mm]
ACO Floor Drain
[102 mm]
Items shown with the NSF Mark have been tested and Certified by NSF International.
www.acobuildingdrainage.com
Grates for Floor Drain top 10” x 10” Page 37 Accessories for ACO 10” Hygienic Floor Drain Page 40
30
ACO 10” Hygienic Floor Drain
Fixed height – horizontal outlet
Product information
A fixed-height Floor Drain can be § Hygienic design following EHEDG
specified as a point drain in areas where document No. 8, 13 and 44
waterproofing is independent of the floor and NSF/ANSI 3-A 14159-1-2014
drain body. § Available in AISI 304 or 316L grades of
stainless steel
§ 3” or 4” Sch 10 outlet options
Items shown with the NSF Mark have been tested and Certified by NSF International.
Product data
9.84 [250]
5.4 [137]
7.15 [182]
6.88 [175]
Ø6.18 [157] 3”
10” x 10”
9.37 [238]
Sch 10
[250 x 250 mm]
[89 mm]
9.84 [250]
4.93 [125]
6.88 [175]
7.18 [182]
Ø4.5 [114]
Ø6.18 [157]
4”
10” x 10”
9.37 [238]
Sch 10
[250 x 250 mm]
[114 mm]
Grates for Floor Drain top 10” x 10” Page 37 Accessories for ACO 10” Hygienic Floor Drain Page 40
31
ACO 10” Hygienic Floor Drain
Adjustable – vertical outlet
Product information
Adjustable Floor Drains can be combined § Hygienic design following EHEDG
with an ACO Floor Drain top or ACO Trench document No. 8, 13 and 44
Drain in most flooring constructions. and NSF/ANSI 3-A 14159-1-2014
§ Available in AISI 304 or 316L grades of
Adjustable solution enables height and stainless steel
rotational adjustment of connected Floor § 3” or 4” Sch 10 outlet options
Drain top or channel. § Floor drain body with location flange
or integrated membrane flange for
Floor Drains can be equipped with mechanical clamp.
ACO Floor Drain
Items shown with the NSF Mark have been tested and Certified by NSF International.
Product data
Ø7.17 [182]
6.69 [170]
9.88 [251]
3”
Ø3.5 [89]
Location flange Sch 10
Ø6.18 [157]
[89 mm]
www.acobuildingdrainage.com
Grates for Floor Drain top 10” x 10” Page 37 Accessories for ACO 10” Hygienic Floor Drain Page 40
32
ACO 10” Hygienic Floor Drain
Adjustable – vertical outlet
6.69 [170]
9.88 [251]
AISI 304 445127
Ø3.5 [89]
3”
Ø6.18 [157]
With mechanical
[89 mm]
Ø7.17 [182]
4”
Ø14.09 [358]
6.69 [170]
9.88 [251]
Ø4.5 [114]
4”
Ø6.18 [157]
With mechanical
Sch 10
clamping flange
[114 mm]
Grates for Floor Drain top 10” x 10” Page 37 Accessories for ACO 10” Hygienic Floor Drain Page 40
33
ACO 10” Hygienic Floor Drain
Adjustable – vertical outlet
Product information
Adjustable Floor Drains can be combined § Hygienic design following EHEDG
with an ACO Floor Drain top or ACO Trench document No. 8, 13, 44
Drain in most flooring constructions. and NSF/ANSI 3-A 14159-1-2014
§ Available in AISI 304 or 316L grades of
The adjustable solution enables height and stainless steel
rotational adjustment of connected floor § 3” or 4” Sch 10 outlet options
drain top or channel. § Floor Drain body with location flange
or integrated membrane flange for
Floor Drains can be equipped with mechanical clamp
ACO Floor Drain
Product data
Ø7.17 [182]
4.31 [110]
5.79 [147]
6.06 [154]
Ø6.18 [157] 3”
9.37 [238]
[89 mm]
Ø14.09 [358]
4.31 [110]
6.06 [154]
5.79 [147]
Ø3.5 [89]
9.37 [238]
3”
With mechanical
Sch 10
clamping flange
[89 mm]
www.acobuildingdrainage.com
Grates for Floor Drain top 10” x 10” Page 37 Accessories for ACO 10” Hygienic Floor Drain Page 40
34
ACO 10” Hygienic Floor Drain
Adjustable – horizontal outlet
6.09 [155]
Ø4.5 [114] AISI 304 445153
Ø6.18 [157]
4”
3.84 [98]
9.37 [238]
[114 mm]
Ø14.09 [358]
5.79 [147]
6.09 [155]
Ø4.5 [114]
Ø6.18 [157]
9.37 [238] 4”
With mechanical
Sch 10
clamping flange
[114 mm]
Grates for Floor Drain top 10” x 10” Page 37 Accessories for ACO 10” Hygienic Floor Drain Page 40
35
ACO 10” Hygienic Floor Drain
Floor Drain top
Product information
Floor Drain top can be combined with § Hygienic design following EHEDG
adjustable floor drain. document No. 8, 13, 44
and NSF/ANSI 3-A 14159-1-2014
Floor Drains can be combined with § Available in AISI 304 or 316L grades of
different grates depending on requested stainless steel
load class. § Floor drain top frame size: 10” x 10”
§ Wide range of grates for different load
classes
ACO Floor Drain
Items shown with the NSF Mark have been tested and Certified by NSF International.
Product data
Floor drain top type Floor Drain top size Material Part
in [mm] number
1.2 [31]
9.8 [250]
4.1 [104]
Ø5.6 [142]
10” x 10”
Standard edge
[250 x 250 mm]
www.acobuildingdrainage.com
Grates for Floor Drain top 10” x 10” Page 37 Accessories for ACO 10” Hygienic Floor Drain Page 40
36
Grates
ACO 10” Hygienic Floor Drain
Product information
A variety of grates are available depending § Hygienic design following EHEDG
on application and required load class. For document No. 8, 13, 44
applications with high hygienic demands, a and NSF/ANSI 3-A 14159-1-2014
Ladder or Cast grate should be selected. § Available in AISI 304 or 316L grades of
stainless steel
§ Grates fit Floor Drain top: 10” x 10”
Items shown with the NSF Mark have been tested and Certified by NSF International.
A
8.58 [218]
A
8.58 [218]
*Grates fully hygienic according to EHEDG document 8, 13 and 44 and NSF/ANSI 3-A 14159-2014.
www.acobuildingdrainage.com
ACO 10” Hygienic Floor Drain Page 29 Accessories for ACO 10” Hygienic Floor Drain Page 40
10” Floor Drain top Page 36 37
Grates
ACO 10” Hygienic Floor Drain
8.58 [218]
8.58 [218]
ACO Floor Drain Grates
A
8.58 [218]
A
8.58 [218]
8.58 [218]
B
8.58 [218]
8.58 [218]
1.18 [30]
Ø3.94 [100]
□ □8.58 [218] □
www.acobuildingdrainage.com
Ø6.26 [159]
AISI 304 416904
1.96 [50]
Ø7.24 [184]
Friction ring
0.94 [24]
Ø5.0 [127]
AISI 304 408200
Ø4.13 [105]
Ø6.22 [158]
Silt basket for use without ACO 10” Hygienic Floor Drain
foul air trap ■ Vertical or horizontal
■ Stainless steel ■ Adjustable
Product information
A fixed-height Floor Drain can be specified § Hygienic design following EHEDG
as point drainage in areas where document No. 8, 13 and 44
waterproofing is independent of the floor and NSF/ANSI 3-A 14159-1-2014
drain body. § Available in AISI 304 or 316L grades of
stainless steel
§ 4" or 6" Sch 10 outlet options
Items shown with the NSF Mark have been tested and Certified by NSF International.
Product data
11.81 [300]
7.91 [201]
1.18 [30]
11.1 [282]
Ø4.5 [114]
4”
Ø8.58 [218] 12” x 12”
Sch 10
[300 x 300 mm]
[114 mm]
Grates for 12” Floor Drain top Page 49 Accessories for ACO 12” Hygienic Floor Drain Page 52
41
ACO 12” Hygienic Floor Drain
Fixed height - vertical outlet
11.81 [300]
7.91 [201]
1.18 [30]
11.65 [296]
Ø6.63 [168] 6”
Ø8.58 [218] 12” x 12”
ACO Floor Drain
Sch 10
[300 x 300 mm]
[168 mm]
Items shown with the NSF Mark have been tested and Certified by NSF International.
Grates for 12” Floor Drain top Page 49 Accessories for ACO 12” Hygienic Floor Drain Page 52
42
ACO 12” Hygienic Floor Drain
Fixed height - Horizontal outlet
Product information
Fixed height floor drains can be specified § Hygienic design following EHEDG
as a point drainage in areas where document No. 8, 13 and 44
waterproofing is independent of the floor and NSF/ANSI 3-A 14159-1-2010
drain body. § Available in AISI 304 or 316L grades of
stainless steel
§ 3" or 4" Sch 10 outlet options
Product Data
11.81 [300]
5.02 [128]
6.97 [177]
Ø8.58 [218]
12” x 12” 4” (101.6 mm)
11.77 [299]
Items shown with the NSF Mark have been tested and Certified by NSF International.
Grates for 12” Floor Drain top Page 49 Accessories for ACO 12” Hygienic Floor Drain Page 52
43
ACO 12” Hygienic Floor Drain
Adjustable – vertical outlet
Product information
Adjustable Floor Drains can be combined § Hygienic design following EHEDG
with an ACO Floor Drain top or ACO Trench document No. 8, 13, 44
Drain in most flooring constructions. and NSF/ANSI 3-A 14159-1-2014
§ Available in AISI 304 or 316L grades of
The adjustable solution enables height and stainless steel
rotational adjustment of connected floor § 4" or 6" Sch 10 outlet diameter
drain top or channel. § Floor Drain body with location flange
or integrated membrane flange for
Floor Drains can be equipped with mechanical clamp
ACO Floor Drain
Product data
4”
Ø4.5 [114]
Location flange Sch 10
Ø8.58 [218]
[114 mm]
Grates for 12” Floor Drain top Page 49 Accessories for ACO 12” Hygienic Floor Drain Page 52
44
ACO 12” Hygienic Floor Drain
Adjustable – vertical outlet
6.69 [170]
9.88 [251]
Ø4.5 [114]
4”
Ø8.58 [218]
[114 mm]
Ø9.45 [240]
6.69 [170]
10.43 [265]
6”
Ø6.63 [168]
Location flange Sch 10
Ø8.58 [218]
[168 mm]
Items shown with the NSF Mark have been tested and Certified by NSF International.
Grates for 12” Floor Drain top Page 49 Accessories for ACO 12” Hygienic Floor Drain Page 52
45
ACO 12” Hygienic Floor Drain
Adjustable – vertical outlet
6.69 [170]
10.43 [265]
Ø6.63 [168] 6”
Ø8.58 [218]
Mechanical clamping
Sch 10
flange
[168 mm]
ACO Floor Drain
Items shown with the NSF Mark have been tested and Certified by NSF International.
Grates for 12” Floor Drain top Page 49 Accessories for ACO 12” Hygienic Floor Drain Page 52
46
ACO 12” Hygienic Floor Drain
Adjustable – horizontal outlet
Product information
Adjustable Floor Drains can be combined § Hygienic design following EHEDG
with an ACO Floor Drain top or ACO Trench document No. 8, 13, 44
Drain in most flooring constructions. and NSF/ANSI 3-A 14159-1-2014
§ Available in AISI 304 or 316L grades of
The adjustable solution enables height and stainless steel
§ 4" Sch 10 outlet diameter
Product data
6.09 [155]
Ø4.5 [114]
[114 mm]
Ø16.54 [420]
3.84 [98]
5.79 [147]
6.09 [155]
Ø4.5 [114]
Ø8.58 [218]
AISI 304 445163
11.77 [299] 4”
Mechanical
Sch 10
clamping flange
[114 mm]
Grates for 12” Floor Drain top Page 49 Accessories for ACO 12” Hygienic Floor Drain Page 52
47
ACO 12” Hygienic Floor Drain
Floor Drain top
Product information
The Floor Drain top can be combined with § Hygienic design following EHEDG
an adjustable floor drain body. document No. 8, 13, 44
and NSF/ANSI 3-A 14159-1-2014
§ Available in AISI 304 or 316L grades of
stainless steel
§ Floor drain top frame size: 12” x 12”
§ Wide range of grates for different load
classes
ACO Floor Drain
Items shown with the NSF Mark have been tested and Certified by NSF International.
Product data
Floor Drain top type Floor Drain top size Material Part
Ø in [mm] number
1.25 [32]
11.8 [300]
4.1 [104]
Ø7.8 [200]
12” x 12”
Standard edge
[300 x 300 mm]
www.acobuildingdrainage.com
Grates for 12” Floor Drain top Page 49 Accessories for ACO 12” Hygienic Floor Drain Page 52
48
Grates
ACO 12” Hygienic Floor Drain
Product information
Variety of grates are available depending § Hygienic design following EHEDG
on application and required load class. document No. 8, 13, 44
For applications with maximum hygienic and NSF/ANSI 3-A 14159-1-2014
demands, a Ladder or Cast grate should § Available in AISI 304 or 316L grades of
be selected. stainless steel
§ Grates fit Floor Drain top: 12” x 12”
Items shown with the NSF Mark have been tested and Certified by NSF International.
A
10.55 [268]
A
10.55 [268]
*Grates fully hygienic according to EHEDG document 8, 13 and 44 and NSF/ANSI 3-A 14159-2014.
ACO 12” Hygienic Floor Drain Page 41 Accessories for ACO 12” Hygienic Floor Drain Page 52
12” Floor Drain top Page 48 49
Grates
ACO 12” Hygienic Floor Drain
10.55 [268]
ACO Floor Drain Grates
10.55 [268]
A
10.55 [268]
www.acobuildingdrainage.com
ACO 12” Hygienic Floor Drain Page 41 Accessories for ACO 12” Hygienic Floor Drain Page 52
50 12” Floor Drain top Page 48
Grates
ACO 12” Hygienic Floor Drain
10.55 [268]
B
Ø8.78 [223]
9.06 [230]
1.18 [30]
Ø3.94 [100]
□ □ □10.55 [268]
ACO 12” Hygienic Floor Drain Page 41 Accessories for ACO 12” Hygienic Floor Drain Page 52
12” Floor Drain top Page 48 51
Accessories
ACO 12” Hygienic Floor Drain
Ø8.74 [222]
AISI 304 416908
1.96 [50]
■ Adjustable
AISI 316L 416909
horizontal
foul air trap)
■ Fixed height
■ Stainless steel
■ Adjustable
AISI 316L 416911
Ø9.56 [243]
Friction ring
0.94 [24]
Ø7.16 [182]
AISI 304 408220
Ø3.77 [96]
Ø8.66 [220]
5.31 [135]
www.acobuildingdrainage.com
ACO 12” Hygienic Floor Drain Page 41 Grates for 12” Floor Drain top Page 49
52 12” Floor Drain top Page 48
Flow rates and construction heights
ACO 8” Hygienic Floor Drain
7.87 [200]
7.87 [200]
ØD
A
5.98 [152]
6.65 [169]
9.17 [233]
9.84 [250]
ØD
Ø5.61 [143] ØD
Ø5.61 [143]
Outlet Outlet
Flow rate [gpm]
diameter position
ØD in [mm] A = 1.5 [38 mm] A = 2.17 [55 mm]
2 Sch 10 [60] 41.73 44
Vertical
4 Sch 10 [114] 147.4 155.44
6.46 [164]
A
A
4.3 [109]
4.3 [109]
ØD
ØD
Outlet Outlet
Flow rate [gpm]
diameter position
ØD in [mm] A = 1.5 [38 mm] A = 2.17 [55 mm]
2 Sch 10 [60] 36.88 39.43
Horizontal
4 Sch 10 [114] 115.71 125.79
ØD
ØD
Ø6.18 [157]
A
8.46 [215]
9.65 [245]
12.83 [326]
11.65 [296]
ØD
Ø6.18 [157] ØD
Ø6.18 [157]
Outlet Outlet
Flow rate [gpm]
diameter position
ØD in [mm] A = 1.77 [45 mm] A = 2.95 [75 mm]
3 Sch 10 [89] 77 82.24
Vertical
4 Sch 10 [114] 175.32 187.25
8.74 [222]
7.56 [192]
5.79 [147]
5.79 [147]
ØD
ØD
Outlet Outlet
Flow rate [gpm]
diameter position
ØD in [mm] A = 1.77 [45 mm] A = 2.95 [75 mm]
3 Sch 10 [89] 65.73 71.75
Horizontal
4 Sch 10 [114] 140.78 155.27
www.acobuildingdrainage.com
A
A
ØD
A
8.46 [215]
9.65 [245]
12.83 [326]
11.65 [296]
ØD
Ø8.58 [218]
ØD
Ø8.58 [218]
Outlet Outlet
Flow rate [gpm]
diameter position
ØD in [mm] A = 1.77 [45 mm] A = 2.95 [75 mm]
4 Sch 10 [114] 175.32 187.25
Vertical
6 Sch 10 [168] 372.92 398.29
A
7.56 [192]
8.74 [222]
5.79 [147]
5.79 [147]
ØD
ØD
Outlet Outlet
Flow rate [gpm]
diameter position
ØD in [mm] A = 1.77 [45 mm] A = 2.95 [75 mm]
4 Sch 10 [114] Horizontal 140.78 155.27
Page
Introduction System overview 57
Introduction 58
Hygienic Design 59
Introduction 78
System overview 79
Introduction 92
www.acobuildingdrainage.com
56