Professional Documents
Culture Documents
SPECIFICATION
Aluminium Air Terminal
Suitable for typical installation.
Cable Conductor
Saddle for Air Terminal
Support (Bakelite)
Diemension (mm)
Cat. No. For Saddle Metal Sheet Clamp
W L T
T-LSPS-BS525 For Adjustable Saddle 90 170 5 Steel Plate
Material : Hot Dip Galvanized Steel with Stainless Steel Bolt JP size M5x25 mm. T-BS525
Support (Bakelite)
Support equipment as an insulator.
T-LSB Black
Material : Bakelite
Metal Sheet Clamp (Can supply one complete set)
TOPWELD , we realize to design , material selection, galvanic corrosion avoidance, accurate
production, practically installation and architectural harmony.
Production
- No effect to roof structure
- No galvanic corrosion
- Effective cost
- Special Type can be request
- Customer can send example of roof to our factory
- Easy to Installation (Supply one set)
Supply Typical Detail
Material
1 304 stainless steel has excellent resistance to a wide range
of atmospheric environments and many corrosive media.
It is subject to pitting and crevice corrosion in warm
chloride environments and to stress corrosion cracking
above about 60 °C. It is considered resistant to potable
water with up to about 200 mg/L chlorides at ambient
2 temperatures, reducing to about 150 mg/L at 60 °C.
Quantity
Item Description
3 /Set
1 Bolt for Cable Support ,Brass 2
4 2
Stainless Steel Bolt Taper Head
Size ¼’’ x ¾’’
1
5 4 Bakelite Support 1
T-LMSC-3S
Hole copper stranded or tape conductors for hip, ridge and sheet tiled roof installation.
Dimensions (mm.)
Cat. No. Vary (H) Vary (L)
Max. Min. Max. Min.
Roof Holders
Hole copper stranded or tape conductors for hip, ridge and sheet tiled roof installation.
T-LRTHS-405SF 20 25 405
Tape Size
Cat. No.
(mm.)
T-LSTS 253A 25 x 3
T-LSTS 254A 25 x 4
Maximum Tape
Cat. No.
(mm)
T-LTTC 256A 26 x 8
T-LTTC 518A 51 x 8
7/&6120$ 95 - 120
GROUNDING SYSTEM
& LIGHTNING PROTECTION A A-27
A
Cable Size
Cat. No.
(mm2)
T-LCCC 35-70A 35 - 70
Cable Size
Cat. No.
(mm2)
T-LTC 70A 50 - 70
A-28
GROUNDING SYSTEM
& LIGHTNING PROTECTION A
Copper-Bonded Ground Rod
Standard Ground Rod Single Type (UL-Listed)
Dia. Size
Cat. No.
(inch)
LEH-58R 5/8
LEH-34R 3/4
Product Features
> Copper is a molecularly bonding to the thickness of the copper-bonded steel core at any point. Shall not be less than
250 microns (0.25 mm.).
> Steel is used as a core made of low carbon steel with a tensile strength.
> Copper coating will not crack
> Corrosion resistance while providing tee lowest resistance to ground.
> Steel core provides driving strength, copper bonded provides conductivity with the soil.
> The fixed and durability of copper plated with Jacket Adherence test and Bending Test standard UL-467.
GROUNDING SYSTEM
& LIGHTNING PROTECTION
A A-1
�\��u,,
it3
'''"''
TOPWELD
GROUNDING SYSTEM & LIGHTNING PROTECTION
Dimensions (mm.)
Cat. No.
L W H
T-GCIPB 330 330 254
Material : Concrete
3,000 kg
GROUNDING SYSTEM
& LIGHTNING PROTECTION A A-11
Ground Test Box
Hole Size
Cat. No. Materials
(mm.)
T-LBWC-12 Copper / Aluminium 14
A-29
GROUNDING SYSTEM
& LIGHTNING PROTECTION A
Aluminum Compression Type Terminal Lug
For used on :
Aluminum Cable according to TIS 293
Cat.No. OVERALL
SIZE mm2 DIAMETER OF DØ dØ L1 L2
CONDUCTOR
+5
LW351 35 6.95 14.0 ( + 0.4) 7.85 ( + 0.15) 125 75
- 0
+5
LW501 50 8.33 16.0 ( + 0.5) 9.75 ( + 0.25) 125 75 - 0
+5
LW701 70 9.73 18.5 ( + 0.5) 11.25 ( + 0.25) 130 75 - 0
+5
LW951 95 11.45 23.0 ( + 0.5) 13.25 ( + 0.25) 140 75 - 0
+5
LW1201 120 12.95 23.0 ( + 0.5) 14.75 ( + 0.25) 145 75 - 0
+5
LW1851 185 17.64 28.5 ( + 0.5) 18.3 ( + 0.25) 155 75 - 0
ELECTRICAL CONNECTIONS
1. ชิ �นส่วนต่างๆทังหมด
� ได้ ถกู บรรจุอยูใ่ นแบบหล่อ ซีลยางถูกบรรจุในส่วนด้ านล่างสุดของแบบหล่อ เพื�อป้องกันการรั�วไหล
2. สอดสายไฟลงในสลีฟ และวางแท่งกราวด์หลอด
3. เทผงเชื�อมลงในเบ้ า OneTime เตรี ยมเชื�อมโลหะในแม่พิมพ์
4. ปิ ดฝาเคาะผงที�ค้างก้ น ตรงปากทางนําร่องจุดชนวนระเบิดโดยใช้ ปืนสําหรับจุดเท่านัน�
5. เสร็จสิ �นการเชื�อมต่อสายแบบหล่อของ OneTime
1 2 3 4 5
All parts packed Insert Cable in Dump OneTime Ignite with flint gun. Finished OneTime
In Mold.,Rubber Sleev and Weld metal in mold. Connection.
Seal in mold bottom Place Rod.
Prevents leaking.
A-14
The TOPWELD "ONE TIME"
Connection is a ceramic disposable unit replacing the familiar semi-permanent graphite mold and
associated Handle clamp.
The TOPWELD "ONE TIME"
Consists of the ceramic mold which contains :
: The TOPWELD Weld metal
: a metal disk
: a flared sleeve or sleeves
: a cover
CC1-1616 16 CC4-1616 16
CC1-2525 25 CC4-2525 25
CC1-3535 35 CC4-3535 35
CC1-5050 50 CC4-5050 50
CC1-7070 70 CC4-7070 70
CC1-9595 95 CC4-9595 95
CC1-120120 120 CC4-120120 120
CC1-150150 150 CC4-150150 150
CC1-185185 185 CC4-185185 185
CC1-240240 240 CC4-240240 240
CC1-300300 300 CC4-300300 300
Type CC2 : Cable Run & Tap Type CB1 : Cable to Bar
Cat No. Cable Size (sq.mm) Cat No. Cable Size (sq.mm)
CC2-1616 16 CB1-16 16
CC2-2525 25 CB1-25 25
CC2-3535 35 CB1-35 35
CC2-5050 50 CB1-50 50
CC2-7070 70 CB1-70 70
CC2-9595 95 CB1-95 95
CC2-120120 120 CB1-120 120
CC2-12095 RUN 120 TAP 95 CB1-150 150
CC2-185185 185 CB1-185 185
CC2-240240 240 CB1-240 240
CC2-300300 300 CB1-300 300
The TOPWELD "ONE TIME"
Connection is a ceramic disposable unit replacing the familiar semi-permanent graphite mold and
associated Handle clamp.
The TOPWELD "ONE TIME"
Consists of the ceramic mold which contains :
: The TOPWELD Weld metal
: a metal disk
: a flared sleeve or sleeves
: a cover
Type GR1 : Cable to Rod Type NT3 : Cable Run & Tap to Rod
Cat No. Cable Size (sq.mm) Rod inch Cat No. Cable Size Rod inch
GR1-5816 16 NT3-581616 16
GR1-5825 25 NT3-582525 25
GR1-5835 35 NT3-583535 35
GR1-5850 50 NT3-585050 50
GR1-5870 70 NT3-587070 70
GR1-5895 95
120 5/8" or 3/4" NT3-589595 95 5/8" or 3/4"
GR1-58120
GR1-58150 150 NT3-58120120 120
GR1-58185 185 NT3-58150150 150
GR1-58240 240 NT3-58185185 185
GR1-58-300 300 NT3-58240240 240
NT3-58300300 300
Type GT2 : Cable Horizontal to Rod Type XT4 : Cable Cross to Rod
Cat No. Cable Size Rod inch Cat No. Cable Size Rod inch
GT2-581616 16 XT4-581616 16
GT2-582525 25 XT4-582525 25
GT2--583535 35 XT4-583535 35
GT2-585050 50 XT4-585050 50
GT2-587070 70 XT4-587070 70
Communication
Ground Station
Number and
Cable Size
Cat No. Diameter of Wire
(mm2) (no./mm)
T-SCC 010 10 7/1.35
T-SCC 016 16 7/1.70
T-SCC 025 25 7/2.14
T-SCC 035 35 19/1.53
T-SCC 050 50 19/1.78
T-SCC 070 70 19/2.14
T-SCC 095 95 19/2.52
T-SCC 120 120 37/2.03
T-SCC 150 150 37/2.25
T-SCC 185 185 37/2.52
T-SCC 240 240 61/2.25
T-SCC 300 300 61/2.52
T-SCC 400 400 61/2.85
T-SCC 500 500 61/3.20
Material : Copper
Reference Standard : TIS 2427-2552
T-HDBB324 128 5 32 4
T-HDBB305 150 5 30 5
T-HDBB325 160 5 32 5
T-HDBB405 200 5 40 5
T-HDBB505 250 5 50 5
A-36
GROUNDING SYSTEM
& LIGHTNING PROTECTION A
CERTIFICATE AND TEST REPORT
KDER.E120176 - Grounding and Bonding Equipment Page 1 of 1
KDER.E120176
Grounding and Bonding Equipment
Page Bottom
Grounding electrodes IH-812, -834, -858, -1012, -1034, -1058, IHP-834, -858, -1034, -1058.
м 2016 UL LLC
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with
permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the
following format: "© 2016 UL LLC".
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name... 5/13/2016
CERTI FI C ATE OF COMPLI ANCE
Certificate Number UL-US-2002881-0
Report Reference E506106-20200921
Date 29-Sep-2020
Standard(s) for Safety: IEC 62561-1, 2nd Ed., Issue Date: 2017-03-01
This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up
Services Procedure provides authorization to apply the UL Mark.
Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s
Follow-Up Services.
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
CERTI FI C ATE OF COMPLI ANCE
Certificate Number UL-US-2002881-0
Report Reference E506106-20200921
Date 29-Sep-2020
This is to certify that representative samples of the product as specified on this certificate were tested according
to the current UL requirements
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
CERTI FI C ATE OF COMPLI ANCE
Certificate Number 20191120-E506106
Report Reference E506106-20190731
Issue Date 2019-NOVEMBER-20
This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up
Services Procedure provides authorization to apply the UL Mark.
Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s
Follow-Up Services.
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 1
Issued to: G K ASSEMBLY CO LTD
110/9-10 Moo2 Mahasawad Sub-District
Bangkruai District Nonthaburi
Thailand 11130
Standard(s) for Safety: IEC 62561-4, 2nd Ed., Issue Date: 2017-07-01
This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up
Services Procedure provides authorization to apply the UL Mark.
Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s
Follow-Up Services.
Testing/Ana[ysis RePort
Tested by Approved by
J fu/F
(Mr.Akanit Thon gktuen g) (Mr.Prachuab Longsuwan)
1. The above resutts are valid exclusively for tested/analysed samples as mentioned in this report.
governor of lSlT
2. pub[ication of the resutts on testing and ana[ysis is prohibited unless written permission is obtained from the
zz- lvrmrt:
o1n1fil1UnllBt {u 1-2 toflnflJnr nuurrrsflr 4 unr.:nrytru.r !{nnao.!!ng n?-.:rvrv{'l totto lvrt, a27P-4402-7,02713-6290-2 02 713'6294
d m riul n fr n u aB ff fr n fl dr u ri orlecl n d[ ms
B
Testing Laboratory 1" F[. Bureau of lndustrial Sectors Deve[opment Building, Room 105
TC 5923027
-tc 5923A28
Operation No. TC s923026
** / -14 1.52
Etongation (7o)
governor of lSlT
2. publicat]on of the results on testing and analysis is prohiblted unless written permission is obtained from the
t&u t-z toafl6fin? nuuyrrsful 4 url.rilfstnu{ rsnano{lrlg t ot t o lut: oz r 124402-7. 02 7 1t-o2go-2 tumre: 0z 7 13'6294
Testing Laboratory L" FL. Bureau of lndustrial Sectors Development Building, Room 102
Customer G.K. ASSEMBLY CO.,LTD
5 94 97.1 109.3
Remarks :The Average vatues are catculated by omitting maximum and minimum values
i Nf\-tF{"
1. The above results are valid exc[usiveLy for tested,ianalysed samples as mentioned in this report'
2. publ.icagon of the results on testing and analysls is prohibited unless written permission is obtained from the governor of lSlT