Professional Documents
Culture Documents
Ugrađivanje Naponskog Okidaca U Trafo Celiju
Ugrađivanje Naponskog Okidaca U Trafo Celiju
Via Amendola
51035 Lamporecchio
(PT) ITALY
1 2 2) Insert from
behind the plate
of the Operating
Mechanism the
two flathead
bolts M6x12 as
B in the figure.
A
5 6
5-6-7) Fix the auxiliary contacts on the back of the plate of the Operating Mechanism, using the two screws
M5x35 the two thicknesses A005385 (to be interposed between the plate of the command and the support
plate of the auxiliary contacts as in fig. 5) and two knurled nuts M5 as in fig 7
Platelets drive of auxiliary contacts are mounted on the switch (item "C" photo 5)
TPS-07ist-kit_ed0701-In Pagina 1
SEL S.p.A.
Via Amendola
51035 Lamporecchio
(PT) ITALY
11 12
11) Insert the wiring in the auxiliary compart- 12) Secure the wiring with PVC cable tie, careful to
ment and connect it to the terminal board. maintain a safe distance from moving parts
13 14
Insert the two heat shrink tubing on wires 14) Connect the coil by the faston terminal plug
01A - 13A of the shunt opening release. predisposed
TPS-07ist-kit_ed0701-In Pagina 2
SEL S.p.A.
Via Amendola
51035 Lamporecchio
(PT) ITALY
15 17
16
18
TPS-07ist-kit_ed0701-In Pagina 3