Professional Documents
Culture Documents
VL-10kW Fuel Cell Station System
VL-10kW Fuel Cell Station System
VL-10kW SYSTEM
01. 5kW5-15kW
PEM PEMFC
Electrolyzer
Power Plan
Technical Parameter
Name Specifications
Model No QLS-H01
Rated Output Flow (m³/h) (at 25℃, 1atm) 1
Quantity of Cells (set) 1
Water requirement (Pure water) Resistivity >10MΩ/cm (25-50℃)
Water tank volume 6L(stainless steel tank)
Max water consumption (L/Hr) 1
Shortest water adding Period With water adding pump, automatically add water
H2 outlet pipe size 6-8mm steel tube
Output gauge pressure 0-3MPa (output under stable pressure)
Fluctuation rate of output pressure <0.2%
H2 purity ≥99.999%
(1) Electrolysis of pure water (without adding alkali) to produce hydrogen with no corrosion and pollution, and the purity of
hydrogen is extremely high.
(2) Cell voltage is low, purification of hydrogen is high, and cycle of changing desiccants is long.
(3) Small electrolytic current, large output of hydrogen and voltage increasing quickly (3 to 5 minutes).
(4) Hydrogenation is produced with stable pressure and output, output of hydrogenation can be controlled according to the
requirements, and automatic control technology is perfect and reliable.
(5) Stable hydrogen pressure, stable current output, track with the using hydrogen automatically, and credibly automatic
protection technology when there are deaquation, overpressure and water-jet.
(4) The electrolysis efficiency is high, and power consumption is less.
(6) Excellent seal performance.
Safety Figures
1. Pressure Transmitter Alarm
2. Hydrogen Overpressure Alarm
3. Hydrogen Permeation Alarm
4. Hydrogen Leak Alarm
5. Water Ponding Alarm
6. Surplus Water Alarm
7. Water Lack Alarm
8. Oxygen Permeation Alarm
9. Water Overheat Alarm
10. Water Quality Alarm
When it meets any problem, H2 generator will both have sound and light alarm. The generator automatically stops.
Pictures for Reference
02. Hydrogen compressor
5-15kW PEMFC Power Plan
Technical Parameter
Name Specifications
Model HCEP-T35
Min. input pressure 3MPa
Max. output pressure 35MPa
Flow rate 120 NLPM
Continuous working hour ≥ 2h
Maintenance period ≥ 2000h
Power supply 110/380VAC/50HZ/1.5KW
Noise < 70dB
Input & Output connector M12 * 1.25, 60° inner cone
Pressure relief connector NPT1/4
Weight 80Kg
low H2 pressure source
Size 940*292*559mm
HCEP-T35 electric hydrogen booster pump adopts two-stage piston pressurization mode. Pure electric drive, no
belt design, and the working noise of the equipment is less than 70dba. Air cooling, easy to use.
Characteristic
1. the outlet pressure switch is used to automatically control the operation or stop of the equipment;
Pictures for Reference 2. set pressure relief valve to control outlet pressure;
3. filter accuracy at inlet and outlet 10 μ filter;
4. easy to carry and field operation;
**Specifications are subject to change without notice. 5. it can be used for nitrogen, air, hydrogen, helium and other gases;
03. Hydrogen Supply
5-15kW PEMFC cylinders
Power Plan
Technical Parameter
Name Specifications
1. Customized multi-bottle group system according to customer requirements of the gas storage capacity.
3. Provide supporting services, hydrogen refueling module, hydrogen storage module and hydrogen supply
module according to customer requirements.
Technical Parameter
Name Specifications
System rated power output(kW) 10
Stack rated power(kW) 12
Cell Number(cells) 90
Operating ambient temperature -10-40℃
Storage ambient temperature -40-60℃
Operating ambient humidity 0-95%
Operating pressure ≤50kPa
IP rating IP54
Vibration noise ≤80dB
Voltage current output 222A@54V
System size (mm)
940×700×770
(enclosure included/ DC/AC not included)
System weight (kg)
180
(includes DC and radiator / DC/AC not included)
air inlet(Ф45mm)
exhaust outlet(Ф63mm)
Adopt integral design, install four moving wheels at the bottom, easy to move.
1. Stack cell number from 65 to 140 is customizable.
2. Including BOP, DC/DC, Radiators.
Water tank inlet 3. Fully Automated Controller Module Box, Remoted Control System
by TCP/IP Ehternet.
4. Matching 380VAC output and 110VAC grid.
5. Outside LCD Panel shows (Power, Power History, Voltage, Current).
6. Remote Control by Software.
Drawings for Reference
VL-10kW PEMFC AC Power
o Includes 1 x VLII-10 PEM FC System Including cooling loop, radiator and piping
o Includes DC/AC Inverter
o Includes 5KW PEM electrolyzer
o Includes Hydrogen compressor 3MPa to 35MPa
o Includes Hydrogen cylinders 50L*2
o Includes 20ft Weatherproof container including the explosion proof lights, fans
o Includes Controller system
o Includes Outside LCD Panel (Power, Power History, Voltage, Current)
o 5KWh Battery excluded
o Shipping excluded
o 5-6 months lead time
Yours Sincerely,
Jason
Horizon Fuel Cell Group
Application Cases
Thank you for your review
www.horizonfuelcell.com