Professional Documents
Culture Documents
COMPACT UNDERGROUND
AND SURFACE CORE DRILL
TECHNICAL SPECIFICATION
APPLICATIONS
Feed boom fully enclosed Yes Feed force 16.8 kN / 1.7 t 3,770 lbf
Interlock to stop rotation on open Yes Pull force 10.7 kN / 1.1 t 2,400 lbf
Feed length (stroke) 800 mm 31.5 in
Total length 1,680 mm 66 in
KEY FEATURES OPTIONS Feed rate, rod running max 1.1 m/s 43 in/s
––CE marked to meet European standards (Conformité ––Rod holder / rod clamp 119 mm Feed rate, drilling max 0.08 m/s 3.5 in/s
Européenne) ––Low gear high torque rotation unit Practical rod running speed 10 - 12 m/min 32-40 ft/min
––Double hydraulic pump for water pump drive Central control of all drilling operations.
DEPTH CAPACITY* Gauges for:
––Jaws for 33.5mm,46mm and 50mm drill rods
Metric Imperial • Hydraulic system pressure
––360 degree turn table mounted to the frame
TK46 286 m 938 ft • Feeding force
A 230 m 755 ft
B
E
G H
J K
I
C D
TS2-004:02/ENG © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
––Core barrel and inner tube consumables. Full range ––Automatic core saws and blades
available ––Manual core saws and blades
––Overshot core retrieval systems ––Core handling systems
––Drill bits, reamers, PCD bits, casing shoes etc. Full ––Pipe wipers
range available ––Orientation down hole tools
––Diamond rods and casing all sizes available ––Si-foam A and B
––Drill muds and additives ––Marking consumables
––Wedging tools ––Flagging tape
––Casing cutters ––Survey stakes
––Water swivels and hoisting plugs ––Magnification tools
––Full range of adaptor subs available ––Geo picks and hammers
––Compass and clinometers
SANDVIK AFTERMARKET ––Chip sample boxes
Sandvik has excellent aftermarket service and support ––Calico bags
with a global footprint in 130 countries around the ––Plastic bags
world. ––Press seal bags
––Wetstrength bags
AFTERMARKET AVAILABLE ––Certified test sieves
––All spare parts are available through Sandvik global ––Over 700 products total
warehouses
––Spare parts packages can be supplied with new rigs
––Sandvik can tailor service contracts to suit customer
requirements
Photos and illustrations in this brochure may show equipment with optional
extras. Equipment, equipment specifications and data on this data sheet subject
to change without notice. Please contact a Sandvik representative for clarification
on equipment, equipment specifications and data.
MINING.SANDVIK.COM