Professional Documents
Culture Documents
Coa dia
(a) vertical circle is to its right and the bubble of the telescope is down
(c) vertical circle is toits left and the bubble of the telescope is down
W
(a) Ventilation Stopping
(b)Fire Dam
(c) Water Dam,
(d) Doors
Q.08. What is the limit of error for levelling for surface Mine Benchmarks ?
Q.11. The given roundshape sign shown in Red colour on Plan, It shows
a) Bore hole
b) Auxiliary Fan
c) Telephone - tt
d) None of the above
a.15. The horizontal angle between the True meridian and Magnetic meridian at a place is called
a) Azimuth
Declination.
c) Magnetic bearing
d) Local attraction.
a) Coal Mines
b) Oil Mines
c) Metal Mines
d) Allthe above
Page 3 of 19
of the adiace..
whenworking reaches within....neter
0.17. Joint SurveyPlans are prepared,
boundary
a.20. The Rise and Fall method of levelling provides a complete check on -
a) Backsight
b) Intermediate sight
c) Foresight
d) Allof the above. .
Q.21. When is a vertical section &plan prepared under regulation 65 of CMR 2017 ?
a) Line of sight
b)Line of collimation .
c) Axis of the Telescope
d) None of the above.
Q.23. Which of the following methods of contouring is most suitable for a hilly
terrainr
(a) Direct method
(b) Square method . qof fafa
(c) Cross-section method
(d) Tacheometric method
Q.24. In Opencast Mine, what is the parameter for deployment of Surveyors as per DGMS Circular
a) Average coal production handled per Year during 3 preceding financial Years.
b) Average OBR production handled per Year during 3 preceding financial Years.
c) Average material (0B & COAL) handled per Year during 3 preceding financial Years.
d) Average material (0B & COAL) handled during last financial Year.
having an average
a.25. As per DGMS circular how many Surveyors will be required in a UG coal mine,
output of 50000 Te. per month
a) 2
b) 1
3
c) 3
d) 4.
into a Mine shall be so designed that its lowest point shall be
Q.26. As per CMR-2017, every entrance
....?
Q.27. The below lines when shown in Blue and Red colours on a Plan, then what do these lines
represent?
a) Bearing angles
b) Length of Lines
c) Triangles
d) Connecting lines.
a) Vertical Plane.
b) Inclined plane
c) Horizontal plane
d) None of the above.
Page6
o.32. In aSurvey Plan ratio of a distance on the Plan to distance on the ground is
represented by
(a) Conversion factor
(b) Velocity factor
(c) Representation factor.
(d) None of the above.
Q.35. For which of the following permanent adjustments of theodolite , the spire test is used ?
Page 7 of 19
surveving
done with the help of Theodolite in
o.37. Which of the following can not be
Horizontal distance
(a) Measurement of
(b) Prolonging Survey lines
(c) Laying off Horizonal angles
(d) Locating points on lines .
(a) RF 1:2000.
(b) RF 1:3000
(c) RF 1:4000
(d) RF 1.10000
(a) 6Months 6H
(b) 4 Months 4 Ha
(c) 3Months. 3.4t
(d) 1Month 1HHTI
Q.40. Regulation No. 65 of CMR-2017 is related to
TRA40. ÎTUHAR-2017 tter HsT 65 Hat
(a) General requirements about Mine Plan
(b) Type of Plans.
(c) Duties and responsibilities of Surveyor
(d) Survey instruments and materials
Q.42. Which plan is made if the distance between the 2 seam is less than 9 meters?
a) Blue
b)Black
c) Green
d) Burnt Sienna.
a.44. - Which of the following have to be in the underground map of the mine
(a) Incline
(b) Cross measure drift
(c) pumping station
(d) All the above
in horizontal plane is called
Q.45. Process of turning the telescope about the verticalaxis
a) Transiting
b) Plunging
Rafur
c) Reversing
d) Swinging.
represent
Q.46. Straight, parallel, and widely spacedcontours
a) A steep surface
b) A flat surface
c) An inclined plane surface
d) Curved surface.
287 fsuf
a) 287°
273 fst
b) 273°
93 fsut
c) 93°
107 fsufr
107°
?
Q.48. Planimeter is used for measuring
3HTYT (afequ)
a) Volume
" b) Area
Contour gradient
d) Slope angle.
Page 9 of 19
stock a
uniform system of maintenance, control, verification of coal
measurement,
Q.49. Code of of OBR in all Mines of ClIL(2020), up to what quantity of Coal stock iis allowed
As per theverification
level and Tape
conventional system i.e. theodolite, Auto
to be measured by
5000 T
a) s000 Te.
10000 ca
b) 10000 Te.
1000 co
c) 1000 Te.
3000 Coi
d) 3000 Te.
book stock of coal
Q.50. What is the permissible limit of variation between physical stockand
Q.53. Check Survey of the main roadway in UG Mines should be made, when any point of the workings d
the Mine has advanced at a ....distance from the previous Check survey
Page10of!
(a) Global information system
(b) Global information scheme
(c) Geographic
information system
(d) Geographic information scheme
a.55.If the Staff is not held vertical at a levelling. station, the reduced level (RL)
observation point would be calculated from the
a) True RL
b) More than true RL
c) Less than true RL
d) None of the above.
a) Churcha
b) Rani Atari
c) Ketki
d) Bangwar
Underground Mines
Q.57. Name the production Area of SECL, which have only
(a) Johila
(b) Baikunthpur. - oyr
(c) Chirimiri
(d) Bishrampur
are situated?
Q.58. In how mnany states, the Mines of SECL
(a) Maharashtra
(b) Tripura
(c)West Bengal
(d) Bihar
Page 11 of 19
of SECL
Q.60. Who is present CMD
Q.63.South Eastern Coalfield Ltd celebrate its foundation day on which date..
(a) 1* october.
(b) 21* December
(c) 25th November
(d) 1 July
Page 12
66. World Environmental Day is celebrated every year on
.(a) Hockey
(b)Cricket -
(c) Horse Riding -
(d) Chess
(b) 1999
(c) 2001 200
(d) 2005
la) Fireman
(b) Fisherman
(c) Missileman
(d) Waterman
Page 13 of 19
President of India
a.72. Who isthe present
Q.74. Which country won the Hockey world Cup 2023 held
in India?
(a) Argentina
(b) France
(c) England
(d) Germany
(a) Chhattisgarh
(b) Madhya Pradesh
(c) Rajasthan
(d) Gujrat
Q.76.The ground distance between Mine Manager's office and Pit Top i_ 300meter and it is representer
by 3 cm in the Mine Plan. What is the
Representative Factor?
(a) 1:100
(b) 1:1000
(c) 1:10000
(d) 1:300
Q.77. What will be Quadrilateral bearing of a linewhose whole circle bearingis 2362
(a) S 56025' W
(b) N56025' W
(c) S 56025' E
(d) S 56025' E Page14of
at a
adopted to determine the difference of the level between two points
0.78. The method of levelling
known as:
considerable distance apart with great precision is
(a) 10 Seconds
(b) 5 Seconds
(c) 1 Second
(d) 2 Seconds
nullahs etc.
such as. boundaries, buildings, fences, roads,
a.82. In a survey, the position of the details measurements are called
measured by means of lateral measurements. These
a) Vertical level
b) Horizontal level
(c) Bench mark
(d) Axis
0.85, Under which Regulation of CMR-2017, DGMS may permit preparation and maintenance of Plans.
Sections and Records in electronic form.
(a) Reg. 64
(b) Reg. 210
(c) Reg. 256
(d ) Reg.69.
0.86. Which of the following features should be shown in water danger plan under CMR 2017?
(a) Position of dyke, fault and geological disturbances - SI55, hÍcc 3Àtt orffy ^ast ff
(b) River, stream, water course, surface contour line
(c) HFL line
(d) All of the above
means of any
Q.87. The elevations and depressions of the surface of the ground are shown on a map by
one of the following lines. Which is the line?
(a) Object
(b) Collimation - alfrtT
(c) Contour
d)Back sight
(a) Pendrive
Page16of19
(b) Micro Processor .
lc) External hardware
(d) Data card
089. Unit of
yT.89.
conversion factor of coal is?
(a) M°/Tonne
-M³ ct
(b) M/Tonne - M²/a
(c) Metre/Tonne .
(d) None of the above
called ?
a.92. The vertical distance between any two consecutive contours is
la) 45 meter
(b) 65 meter Page 17 of 19
(c) 120 meter
d) 150 meter
Q.94. What does total Latitude and Total Departure in theodolite traversing mean... ?
(a) 1:50000 RF
(b) 1:5000 RF
(c) 1:1000 RF
(d) 1:10000 RF
a .97. The system of surveying in which the sides of the triangles, instead of angles, are measured is
called ?
a) Triangulation
b) Trilateration
(c) Base station
(d) None of these
length is called ?
Q.98. An offset more than 15.00 Meter in
Page 19 of 19