Professional Documents
Culture Documents
.02
7 .70 7 .70
.02
Coefficient of Utilization (dashed curves)
Coefficient of Utilization (dashed curves)
0 0 0 0
2 1 0 1 2 3 4 5 2 1 0 1 2 3 4 5
Ratio = Distance across/Mounting height Ratio = Distance across/Mounting height
Photometrics
HOLOPHANE® 2
Ordering Data
1 Luminaire
__ PK Parkpak 140mm
(5.5”)
2 Source and wattage
__ 050HP 50W HPS (NA with 347V)
54mm
(2.125”) “Q” only
__ 070HP 70W HPS
__ 100HP 100W HPS
__ 15AHP 150W HPS 283mm
__ 70DMH 70W MH, or MV, medium base (11.125”)
__ 10DMH 100W MH, or MV, medium base 229mm (9”)
260mm (10.25”) MH
__ 15DMH 150W MH, or MV, medium base (MT only)
__ 175MH 175W MH, or MV, medium base
314mm (12.375”)
__ 26QFL 26W (2) Quad fluorescent (120, 240 and 347 volt only)
Available with “S” optical only. Minimum starting temperature 10°C (50°F)
3 Voltage
__ 12 120 volt
__ 20 208 volt
__ 08 208 volt isolated secondary (Available through TSG only)
__ 24 240 volt
__ 40 240 volt isolated secondary (Available through TSG only)
__ 27 277 volt
__ 34 347 volt
__ MT Multi-voltage for 120, 208, 240 and 347 volt
4 Mounting versions
__ C Ceiling or wall mount to outlet box
__ H Horizontal mount (required mount for accessory mountings such as wall brackets)
__ Q Quick install/ through wiring
__ F Flexible pendant
__ P Pendant
__ V Vertical pole mount; not available with 70DMH, 10DMH, 15DMH, 175MH
5 Housing
__ G
finish
Gray polyester powder paint
__ K Black polyester powder paint
__ Z Bronze polyester powder paint
__ W White polyester powder paint
6 Refractor
__ A
distribution
Asymmetric
__ S Square
7 Options
__ EM Standby light fixture with 100W maximum tungsten halogen lamp. Not available with 70DMH34,
10DMH34, 15DMH34
__ PR 2
Photocontrol for 120, 208, 240, 277, 347 volt. Not available with “MT”
__ TP Tamper resistant screws
__ F12 Single fuse: 120, 240, 277, 347 volt.
__ F22 Double fuse: 208 and 240 volt.
__ PS Protected starter
8 Accessories
__ LAMP Ship lamp as line item
__ PARKSD External shield
__ TPD1 Driver for tamper-resistant screws
__ PARKWBX1 Wall bracket for horizontal mounting (Not UL listed)
__ PARKWSX1 Wall bracket with 300mm (11.75”) arm for horizontal mounting.
__ PARKBA4X1 Bracket arm for mounting on 100mm (4”) square pole. (Requires “H” mounting)
Notes: 1 Replace “X” with G, K, Z, or W finish
2 For MT contact TSG. Customer specifys voltage
UL Listing variations
PARKPAK ®
3 HOLOPHANE®
Typical Configurations
50, 70, 100, 150W HPS 175W MH Horizontal mounting only Quick-install/through wire
230mm
(9.25”) 270mm
(10.75”)
90mm
(3.45”) 130mm
(4.94”)
310mm (12.38”)
300mm
(11.75”)