Professional Documents
Culture Documents
2 User Interface
2 User Interface
User Interface
EPLAN Training 1
User Interface
EPLAN Training 2
User Interface
1 Operating EPLAN with the Keyboard..........................................................5
1.1 Open a menu item ....................................................................................5
1.2 Select elements within a dialog.................................................................5
1.3 Select tabs ................................................................................................5
1.4 Open menus and popup menus................................................................6
1.5 Select / deselect check boxes...................................................................6
1.6 Open drop-down lists ................................................................................7
1.7 Use the keyboard in list or tree views .......................................................7
8 Selecting Objects........................................................................................39
8.1 Select single objects ...............................................................................39
8.2 Select several objects in sequence.........................................................40
8.3 Select several objects not in sequence...................................................41
8.4 Remove selection ...................................................................................42
EPLAN Training 4
User Interface
Precondition:
2. Enter the underlined identifier of the desired menu item within this menu.
3. Proceed in the same way until you reach the desired menu item.
EPLAN Training 5
User Interface
2. Or press the [CTRL] + [SHIFT] + [TAB] keys together until you have selected
the desired tab. The "paging" through the tabs then takes place from right to
left.
2. Press [SPACE].
EPLAN Training 6
User Interface
EPLAN Training 7
User Interface
2. Press [*] on your numeric keypad. (If your keyboard does not have a numeric
keypad, e.g. a laptop keyboard, you can also use the key combination [Fn]
combined with the computer and country specific key for "X".)
EPLAN Training 8
User Interface
3. Switch between the tree and list views by pressing [CTRL] + [TAB] .
4. Use the arrow keys to select the desired object within the list and tree
structures.
Tip:
At any time you can press the [Strg] + [F12] keys to switch between the "dockable"
EPLAN Training 9
User Interface
dialogs, e.g. between the Page Navigator, the Message Management and a
graphical editor.
EPLAN Training 10
User Interface
1. In the Keyboard shortcuts dialog, select the desired menu command from
the Select command list.
2. Click [Create].
EPLAN Training 11
User Interface
3. In the Create keyboard shortcuts dialog, in the New shortcut key field,
enter the desired shortcut key for the selected command.
If you select a shortcut key that is already assigned then the Current
assignment is displayed. You can overwrite this. If you do not wish to
overwrite the assignment, enter a different shortcut key.
4. Click [OK].
The dialog is closed and the (new) shortcut key is displayed in the
Assigned shortcut keys field.
6. Click [OK].
1. In the Keyboard shortcuts dialog, select the desired menu command from
the Select command list.
EPLAN Training 12
User Interface
The fields Description and Assigned shortcut keys are automatically
filled with the appropriate data, if this exists.
2. In the Assigned shortcut keys field, select the shortcut key to be deleted.
(Multiple selection isn't possible here).
3. Click [Remove].
4. Click [OK].
EPLAN Training 13
User Interface
2. Click [Yes], if all keyboard shortcuts that you have created are to be removed
and the original settings restored, otherwise click [No].
3. Click [OK].
EPLAN Training 14
User Interface
3 Adjusting Toolbars
EPLAN has pre-defined toolbars that you can activate or deactivate. You can also
change the display type of the buttons. You can also create your own toolbars and
equip them with the desired commands. These user-defined toolbars can be edited
and deleted. You can also edit the EPLAN pre-defined toolbars. Buttons can be
added or deleted. The pre-defined toolbars cannot however be deleted.
2. Select the check box for each toolbar in the list that is to be displayed.
3. If required, deselect the check boxes for toolbars that are not to be displayed.
4. Click [OK].
EPLAN Training 15
User Interface
Tip:
3. Click [OK].
When you now move the cursor over a toolbar symbol in EPLAN, then a small text
window is displayed below the symbol with a description of the symbol.
EPLAN Training 16
User Interface
1. In the Customize dialog, select the Toolbars tab.
3. Click [OK].
2. Click [New].
EPLAN Training 17
User Interface
3. In the New toolbar dialog, in the Toolbar name field, enter a designation for
your toolbar.
4. Click [OK].
The dialog is closed, the new toolbar is created and displayed in the user
interface.
EPLAN Training 18
User Interface
6. From the Categories list, select the desired category whose buttons are to be
displayed.
7. Click the desired button and use "Drag & Drop" to pull it onto your toolbar.
If you select an Action or a Menu without pre-defined image data, then you
must specify further settings for the button in a subsequent dialog.
8. Repeat these steps until the toolbar contains all desired symbols.
Note:
Once you have created user-defined toolbars, you must save the current user
interface configuration as a new workspace or as a selected workspace (edit), so that
the user-defined toolbars are permanently available for use (in the current
workspace).
EPLAN Training 19
User Interface
3. Click [Delete].
2. Select the check box of the toolbar to which you wish to add extra commands.
EPLAN Training 20
User Interface
3. Select the Commands tab.
4. From the Categories list, select the desired category whose buttons are to be
displayed.
5. Click the desired button and use "Drag & Drop" to pull it onto the previously
activated toolbar.
If you select an Action or a Menu without pre-defined image data, then you
must specify further settings for the button in a subsequent dialog.
6. Repeat these steps until the toolbar contains all desired symbols.
Note:
Once you have extended the predefined toolbars, you must save the current user
interface configuration as a new workspace or as a selected workspace (edit), so that
the extended predefined toolbars are permanently available for use (in the current
workspace).
EPLAN Training 21
User Interface
2. Click the desired button and use "Drag & Drop" to pull it off your toolbar.
Note:
Once you have removed buttons, you must save the current user interface
configuration as a new workspace or as a selected workspace (edit), so that the
modified toolbars are permanently available for use (in the current workspace).
2. In the Toolbars list, select the predefined toolbars that you have modified and
now wish to reset.
EPLAN Training 22
User Interface
3. Click [Reset].
EPLAN Training 23
User Interface
Precondition:
1. In the Export Toolbars dialog, select the toolbar(s) that you wish to export.
2. Click [OK].
3. In the subsequent dialog, select the directory to where you wish to export the
toolbar.
4. In the File name field, enter the name for the export file.
5. Click [Save].
EPLAN Training 24
User Interface
The toolbar is exported and saved as an XML file under the specified
name.
Precondition:
You have created and exported user-defined toolbars or another user has made an
appropriate export file containing toolbars available to you.
1. In the Import toolbars dialog, select the directory from which you wish to
import the toolbar(s).
EPLAN Training 25
User Interface
3. Click [Open].
The toolbars are imported. If the toolbars already exist then an appropriate
message is displayed.
Note:
After importing user-defined toolbars, you must save the current user interface
configuration as a new workspace or as a selected workspace (edit), so that the user-
defined toolbars are permanently available for use (in the current workspace).
EPLAN Training 26
User Interface
When the program is exited, EPLAN notes the last settings of these elements
(docked, undocked, size, position) and restores them the next time the program is
started. If a particular configuration of dockable elements is to be permanently
retained, i.e. when changing workspaces, then these settings must be saved as a
new workspace or saved under the existing workspace.
The windows of open pages are also "dockable and undockable". However, the
settings of these editors cannot be saved with a workspace.
Precondition:
1. Using the left mouse button, click a "free" area within the menu bar, within a
toolbar, or in the title bar of a dockable dialog and keep the mouse button
pressed.
EPLAN Training 27
User Interface
2. Press the [CTRL] key to avoid docking and pull the docked element to the
desired position.
If the borders of the respective control element are displayed with a thick
line, then EPLAN positions the control element as an independent, undocked
element on the Windows desktop.
Precondition:
1. Click the title bar of the desired undocked control element with the left mouse
button and keep the button pressed.
EPLAN Training 28
User Interface
2. Pull the element to the desired position in the EPLAN main window.
To dock the undocked element to the border of the EPLAN main window
(or the border of another dockable element), you must move the edge of the
element exactly to the border of the EPLAN main window. You can recognize
this by the border of the element being displayed as a thin line. This will be a
horizontal or vertical line, depending on whether you wish to position the
control element at the top, bottom, left or right. You can recognize the
orientation from the thinly drawn preview rectangle.
Precondition:
You have opened a page in an editor (graphical editor, symbol editor, form editor,
etc.). The editor is displayed as a subordinate window in the main window.
EPLAN Training 29
User Interface
2. Click the title bar of the editor using the right mouse button, and select Popup
menu > Floating.
The editor is immediately undocked from the frame of the EPLAN main
window.
Precondition:
You have opened a page in an editor (graphical editor, symbol editor, form editor,
etc.). The editor is displayed in your user interface as an undocked window.
1. Click the title bar of the respective editor with the right mouse button.
EPLAN Training 30
User Interface
2. In the popup menu, first select Docked to and then select the docking
direction from the submenu (Top, Left, Bottom, Right).
The editor is docked in the selected docking direction to the frame of the
EPLAN main window.
Precondition:
You have opened a page in an editor (graphical editor, symbol editor, form editor,
etc.). The editor is displayed in your user interface as a docked or undocked window.
EPLAN Training 31
User Interface
1. Click the title bar of the editor using the right mouse button, and select Popup
menu > Child window.
The respective editor is adjusted to fit in the main window so that its
internal area is optimally used. The tile bar of the subordinate window is then
integrated into the title bar of the main window.
EPLAN Training 32
User Interface
Note:
You can only select another dialog language if this language was installed when the
system was initially installed.
Options > Settings > User > Display > User interface
1. Select the desired language from the Dialog Language drop-down list in the
Settings: User interface dialog.
2. Click [OK].
EPLAN Training 33
User Interface
Note:
Although the Page Navigator has both list and tree structures, the "list" in this case
is a table. This means that page overview lists are controlled in a different manner to
the "normal" selection dialog lists.
Precondition:
You have opened a selection dialog and selected the List tab.
EPLAN Training 34
User Interface
1. Enter a character
The cursor jumps to the first list entry beginning with this character.
With every entry, the cursor jumps to the next object beginning with this
character.
EPLAN Training 35
User Interface
3. Quickly enter several characters one after the other.
EPLAN interprets the entry as a string of characters and the cursor jumps
to the first object beginning with this string of characters.
Note:
The search direction is always from the top down and the first display column is
always searched. Once the last element in the list is reached, the search begins
again from the top.
Precondition:
You have opened a selection dialog and selected the List tab.
EPLAN Training 36
User Interface
1. Click one of the column headers.
If the displayed data is in the original sequence, then sorting first takes
place in increasing alphanumeric order of the column whose header you
clicked. (An arrow symbol in the column header shows the sorting direction.)
The sorting now occurs in decreasing order, again of the column whose
header you clicked. (An arrow symbol in the column header shows the sorting
direction.)
EPLAN Training 37
User Interface
3. Click the same header a third time.
EPLAN Training 38
User Interface
8 Selecting Objects
In selection dialogs, one or more objects can be selected.
Precondition:
EPLAN Training 39
User Interface
Precondition:
2. Hold down the [SHIFT] key and click the last object to be selected.
EPLAN Training 40
User Interface
Precondition:
2. Hold down the [CTRL] key and click the next object to be selected.
EPLAN Training 41
User Interface
3. Repeat this step for all desired objects.
Precondition:
You have opened a selection dialog and selected at least one object.
1. To remove the selection of a single selected object, click next to the object.
2. To remove the selection of one or several selected objects, hold down the
[CTRL] key and click the desired objects.
EPLAN Training 42
User Interface
Precondition:
3. Select the cells where the contents of the clipboard are to be copied to.
Multiple selection is possible here.
EPLAN Training 43
User Interface
4. Press [CTRL] + [V].
Precondition:
3. Select the cells where the contents of the clipboard are to be copied to.
Multiple selection is possible here but the number of cells to be filled must be a
multiple of the number of originally copied cells.
Example:
You have selected two cells with different content and pressed [CTRL] + [C]. If you
EPLAN Training 44
User Interface
now select five cells and press [CTRL] + [V], then EPLAN displays an error message
stating that this multiple selection is not possible. If you now select four or six cells
instead and press [CTRL] + [V] then the data is inserted.
Precondition:
3. Select the cell where the contents of the first source cell are to be copied to.
Depending on whether you selected source cells lying next to each other or under
each other, the cells are filled with the copied data next to or under the first target
cell.
EPLAN Training 45
User Interface
Notes:
• If entire lines or columns are selected when copying, then the row / column
header is also copied.
• When illegal values are inserted into a cell, either the original value remains
unchanged or an automatic correction is made to the inserted value.
Tip:
You can insert the content of an Excel® cell using Drag & Drop, by clicking in the
upper left corner of the selected cell and then dragging it into a table in your
project.
EPLAN Training 46
User Interface
Precondition:
1. Double-click to the right of the column separator next to the heading of the
column whose width you wish to optimize.
The width of the column is adjusted so that all values contained in the column are
completely displayed.
Precondition:
1. Press the keys [CTRL] + ["plus sign"] on the numeric keypad of the
keyboard.
EPLAN Training 47
User Interface
All existing columns are optimized.
Note:
If your keyboard does not have a numeric keypad, e.g. a laptop keyboard, you can
also use the key combination [Fn] combined with the computer and country specific
key for "Plus".
Precondition:
2. Pull the column or row separator with the mouse to the desired new position.
The change affects all selected cells, i.e. their height / width are changed.
EPLAN Training 48
User Interface
Precondition:
1. Select the projects you wish to move. (Multiple selection is possible here).
In the dialog, the [Move <direction>] buttons possible for the current
selection are activated.
The selected objects are moved one position in the desired direction with
each click, as long as this is possible.
3. Click [OK].
Precondition:
EPLAN Training 49
User Interface
1. Select the projects you wish to move. Multiple selection is possible here.
3. Click [OK].
Note:
Upon confirmation of a new ordering, EPLAN notes the positions of the table headers
and automatically jumps to the last focused cell when the dialog is reopened. If the
ordering within the table has changed, then a jump occurs to either the first or last
cell to be edited.
Precondition:
1. Double-click to the right of the column separator next to the heading of the
column whose width you wish to optimize.
The width of the column is adjusted so that all values contained in the column are
completely displayed.
EPLAN Training 50
User Interface
Precondition:
1. Press the keys [CTRL] + ["plus sign"] on the numeric keypad of the
keyboard.
Note:
If your keyboard does not have a numeric keypad, e.g. a laptop keyboard, you can
also use the key combination [Fn] combined with the computer and country specific
key for "Plus".
Precondition:
2. Pull the column or row separator with the mouse to the desired new position.
EPLAN Training 51
User Interface
The change affects all selected cells, i.e. their height / width are changed.
EPLAN Training 52
User Interface
Precondition:
2. If necessary, change the dialog size of both views so that both dialogs are
displayed at the same time.
EPLAN Training 53
User Interface
3. Select the desired object in the first dialog.
4. Keep the mouse button pressed and pull the element from the first dialog into
the second dialog.
The mouse pointer changes its form and shows you whether or not
you can insert the object.
The selected object is copied, moved or linked into the target, depending
on the source and target.
EPLAN Training 54
User Interface
EPLAN Training 55