Professional Documents
Culture Documents
www.instarelectrical.com/front/product/542-49.html 1/6
2/1/23, 5:37 PM SEA2M68 Stepper Motor Driver - Shenzhen Instar Electromechanical Technology Development Co., Ltd.
SEA2M68
MENU Stepper Motor Driver
NEMA:11~43
Features
● High performance、low noise、affordable price、high speed and torque、excellent stability.
● 16 selections of uniform angle and constant torque subdivisions, the max resolution up to
40000 steps/rev.
● Adoption of 4-wires-control circuit greatly reduces noise and increases the rotation stability
● Once the pulse stops for more than 100ms, the coil current will be halved automatically, to
prevent the overheating
● Bipolar constant current chopper control improves the output speed and power of the motor
● Error protection:① Low supply voltage ② High supply voltage ③ Phase open circuit ④
Phase overcurrent
www.instarelectrical.com/front/product/542-49.html 2/6
2/1/23, 5:37 PM SEA2M68 Stepper Motor Driver - Shenzhen Instar Electromechanical Technology Development Co., Ltd.
Description
MENU
SEA2M68 is a microstep motor driver with uniform angle and constant torque subdivisions,
Products
Stepper driver voltage isServo
DC24V~80V(The optimal voltage is DC60V ), single Servo
motor driver (http://www.instarelectrical.com:80/Category-91.html) power supply.
motor It
(http://www
matches 2 phase hybrid stepper motors which rated current under 6.5A, external diameter under
85mm, and 4 or 8 outlets.
Bipolar constant current chopper control makes the motor run smoothly with lower noise and
higher stability; the increse of the voltage greatly improves the driver capability and speed. The
coil current will be halved automatically once the pulse stops for more than 100ms, it reduces the
heat of driver by 50%, reduces the heat of motor as well. Users can choose low speed high
subdivision which is up to 40000 steps / rev, it improves the precision , and reduces the vibration
and noise.
Application
Woodworking engraving machine, laser engraving machine, marking machine, labeling machine,
solid crystal machine, wire bonding machine, UV printer, 3D printer, inkjet printer, plotter,
embroidery machine, dispensing machine, glue filling machine, soldering machine, BGA rework
station, laminating machine, placement machine, hot press, backlight laminating machine,
coating machine, reciprocating machine, terminal machine, stripping machine, winding machine,
solder paste printing machine, PCB drilling machine, V -CUT machine, target machine, FPC
reinforcement machine, coating machine, lamination machine, IC sorting machine, IC burner,
tape machine, medical equipment, non-standard equipment, XYZ measuring instrument,
connector assembly machine, SMT peripheral equipment etc.
Im (A) 2.8 3.0 3.2 3.5 3.8 4.0 4.2 4.5 4.8 5.0 5.2 5.5 5.8 6.0 6.2 6.5
www.instarelectrical.com/front/product/542-49.html 3/6
2/1/23, 5:37 PM SEA2M68 Stepper Motor Driver - Shenzhen Instar Electromechanical Technology Development Co., Ltd.
MENU 2000 3200 4000 5000 6400 8000 1000 1280 2000 2560 4000
Pulse / rev 200 400 800 1000 1600
0 0 0 0 0
Products Servo motor driver (http://www.instarelectrical.com:80/Category-91.html) Servo motor (http://www
D5 ON ON OFF ON OFF ON OFF OFF ON OFF OFF ON OFF ON OFF ON
Self-test switch (OFF: receive external pulse signal; ON: receive internal pulse signa
D10 l, which means that the driver will automatically send out a pulse signal, and the spe
ed can be controlled by D5~D8.
Dimension
Pin Functions
POWER Power Indicator Power on, the green indicator normally on.
www.instarelectrical.com/front/product/542-49.html 4/6
2/1/23, 5:37 PM SEA2M68 Stepper Motor Driver - Shenzhen Instar Electromechanical Technology Development Co., Ltd.
When the low electrical level is valid, it cut off the motor
MF- Motor free signal current the driver stops working and motor will be in a fr
ee state.
+V Power+
DC24~80V ( The optimal voltage is DC60V ).
-V Power-
+A、-A
Connect the motor Please refer to the motor connections.
+B、-B
Alarm functions
● When 1 Green and 1 Red flashes, it means that the power supply voltage of the driver is low;
solution: check whether the power supply voltage of the driver is too low;
● When 1 Green and 2 Red flashes, it means that the power supply voltage of the driver is high;
solution: check whether the power supply voltage of the driver is too high;
● When 1 Green and 3 Red flashes, it means that the phase of the stepper motor is open; the
solution: check whether the wiring of the stepper motor is wrong;
www.instarelectrical.com/front/product/542-49.html 5/6
2/1/23, 5:37 PM SEA2M68 Stepper Motor Driver - Shenzhen Instar Electromechanical Technology Development Co., Ltd.
MENU
● When 1 Green and 4 Red flashes, it means that the stepper motor phase is over-current;
Products
solution: check whetherServo
the driver MOS
motor driver tube is damaged or whether the stepperServo
(http://www.instarelectrical.com:80/Category-91.html) motor is (http://www
motor
damaged;
● When 1 Green and 5 Red flashes, it means the driver has other faults; solution: send it back to
the manufacturer for inspection;
The driver will loe self-locking function when the above alarms start, please clear faults and re-up
electricity, the driver goes back to normal when the green power indicator normally on.
▲ Attention: the driver canot be protective when connects the wire inversely or wrongly, please
confirm the connections before electrify it, otherwise the fuse inside may be burnout.
(https://beian.miit.gov.cn/)
www.instarelectrical.com/front/product/542-49.html 6/6