Professional Documents
Culture Documents
DSEA109 Data Sheet
DSEA109 Data Sheet
DSEA109 SPECIFICATION
POWER SUPPLY
DIGITAL AUTOMATIC VOLTAGE REGULATOR VOLTAGE RANGE
100 V AC to 270 V AC (Ph to N & Ph to Ph)
FREQUENCY RANGE
40 Hz to 65 Hz
EXCITATION OUTPUT
EXCITER FIELD WINDING
IMPEDANCE
5 Ω to 50 Ω
QUADRATURE DROOP CT
MAXIMUM SECONDARY CURRENT
5 A AC
BURDEN
KEY FEATURES KEY BENEFITS 0.25 VA
• Power input compatible with • Digital electronics ensures a
3-phase PMG, single phase PMG, smooth, stable, regulated AC ACCURACY
1%
auxiliary and shunt windings. output voltage from the alternator.
• 3-phase or single phase generator • Configurable to suit a wide range REMOTE VOLTAGE ADJUSTMENT
output voltage sensing. of alternators with auxiliary winding POTENTIOMETER
• CAN port providing J1939 or shunt power supplies as well 5 kΩ
communications. as PMG. VOLTAGE INPUT
• Soft start ramping. • Suitable for generator synchronising -10 V DC to 10 V DC
• Under Frequency Roll Off (UFRO) and load sharing applications with
protection with optional connections for a quadrature droop DIMENSIONS
OVERALL
instantaneous step. CT and remote voltage adjustment. 180mm x 145 mm x 61 mm
• Loss of voltage sensing protection. • Compatible with all DSE 7.0” x 5.7” x 2.4”
• Over excitation protection. synchronising and load sharing
• Remote voltage adjustment. controllers. STORAGE TEMPERATURE RANGE
-40 °C to +85 °C
- 5 kΩ potentiometer with • Licence-free PC software -40 °F to +185 °F
open circuit protection. • Comprehensive PC configuration
- -10 V DC to 10 V DC. using the DSE Configuration OPERATING TEMPERATURE RANGE
• DIP switch selection for 6 Suite PC Software and the DSE815 -40 °C to +70 °C
-40 °F to +158 °F
configurations and 2 stability Configuration Interface.
ranges. • Simple to use with onboard set up WEIGHT
• Potentiometer adjustment for using a combination of DIP 0.46 kg.
voltage set points, droop, UFRO, switches and potentiometers.
proportional and integral gain. • Communicates with 3rd
• LED indication for fault and party equipment using J1939
operating status. communications.
• Configurable via DSE Configuration
Suite PC software connected via
the DSE815 configuration interface.
• Chassis mountable potted
enclosure.
• Spade terminals for simple
connection.
RELATED MATERIALS
TITLE PART NO.
DSEA109 Installation Instructions 053-245
DSEA109 Operator Manual 057-295
DSEA109 Configuration Suite PC Software Manual 057-294
DSE815 Datasheet 055-225
ELECTRO-MAGNETIC COMPATIBILITY
BS EN 61000-6-2
DIGITAL AUTOMATIC VOLTAGE REGULATOR EMC Generic Immunity Standard for
the Industrial Environment
(AVR) WITH CAN COMMUNICATIONS & PMG BS EN 61000-6-4
EMC Generic Emission Standard for
the Industrial Environment
ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment,
including Electrical Business Equipment
TEMPERATURE
BS EN 60068-2-1
The DSEA109 Digital Automatic The DSEA109 is simple to install Ab/Ae Cold Test -30 ºC
Voltage Regulator (AVR) with CAN and set up using either the DSE BS EN 60068-2-2
is designed to regulate the output Configuration Suite PC Software and Bb/Be Dry Heat +70 ºC
J1939
DSEA109
POWER SUPPLY
(PMG, AUXILIARY WINDING OR SHUNT)
1ph 1 ph 1ph
N (2 ph) N (2 ph)
3 ph 3 ph
ISSUE 1