You are on page 1of 2

RTSP time out

Specify the time for the time out by the Keep-Alive


command from RTSP streaming. You can set the
Using NDI|HX
time out from [0] second to [600] seconds.
To use NDI|HX, you are required to purchase the
At the [0] setting, time out of the Keep-Alive
license key.
command is not available.
Purchasing the license key
RTSP streaming authentication can be enabled/ You can purchase the license key from the
disabled from RTSP Authentication (page 82) on following URL of NewTek, Inc.
the User tab. http://new.tk/ndi_sony

Examples of RTSP streaming acquisition Notes


This camera is compatible with RTSP as the • Download the latest driver of NDI|HX and
streaming protocol. Up to three streams are install it in NewTek products.
available for the camera. The URL of each stream • For details on settings and operations for
is as follows. NDI|HX, refer to the instructions of NewTek
• rtsp://<camera_address>:<Port>/video1 products.
(Image 1)
• rtsp://<camera_address>:<Port>/video2
(Image 2) Services and software provided by other
• rtsp://<camera_address>:<Port>/video3 companies
(Image 3)
<camera_address>: IP address of the camera • Separate terms and conditions of use may be
<Port>: RTSP port number applied.
• Provision of services and software updates
Note may be interrupted or terminated without
Playing on media players other than web notice.
browsers is not guaranteed. • Services and software content are subject to
change without notice.
• Separate registration and/or payment may
be required.

Please note that Sony Corporation is not


responsible for any claim, from customers or
third parties, arising from any use of services
and software provided by other companies.

93

You might also like