Professional Documents
Culture Documents
Peripheral
pulse wave
Recorder module,
WS-510P P907 CO2 sensor kit
Wall mount, KG-951P V923 Disposable naso-oral P905 for Quantitative method
PWTT (Pulse Wave Transit Time) has a
Network card, QI- adapter, for oxygen cannula R802 Airway adaptor, adult,
correlation to blood pressure in most cases. Free-writing patient name 101P
World’s first
adjustment, 30 pcs 30 pcs
mainstream CO2 sensor
PWTT is calculated You can directly write the patient name on Network printer card, R804 Airway adapter for R803 Airway adaptor, child,
for both intubated /non-
from ECG and Blood pressure PWTT QI-111P intubated patients, 30 pcs 30 pcs
screen with your finger or an optional touch intubated patients
Battery, X060
SpO2 non- Shorter
pen. Any characters and figures can be
UP HL7 gateway
invasively. displayed. (not available on the network) software, QP-982PK
Longer This brochure may be revised or replaced by Nihon Kohden at any time without notice.
DOWN
During periodic NIBP measurement, if
PWTT exceeds a threshold it triggers NIBP
measurement.
(uses Nihon Kohden patented technology)
Flexible parameters with MULTI connectors Large data storage and powerful review High performance
5 MULTI connectors for flexible monitoring Alarm history Multi parameter full disclosure 12-lead ECG measurement and analysis
Configured parameters: You can review the numeric data of alarm occurrences from Max 30 hours of ECG and other 4 traces Simultaneous 12-lead
Five MULTI connectors are
ECG, respiration (impedance), SpO2, NIBP, the alarm history table. You can also review the wave by can be filed and reviewed. ECG with 10 electrode
provided to give high flexibility
temperature (2ch), CO2*1, O2*1, N2O*1, anesthetic jumping to the full disclosure screen from the alarm history measurement provides
in the selection of parameters.
agents*1 table. highly reliable ECG
When you plug the sensor
MULTI connector parameters: data. 12-lead ECG
cable into a MULTI connector, it
blood pressure (max 5ch), temperature (2ch), analysis is also
automatically detects the type of
cardiac output, respiration (thermistor), FiO2*2, provided.
parameter and starts measuring. CO2*2(mainstream),
*1: With optional Multi Gas Unit for BSM-5105K
*2: Cannot be measured with Multigas parameters
with Anesthesia Gas parameters, BSM-5135K OR Note: Interbed display does not replace
the central monitor’s function.