Professional Documents
Culture Documents
(UNLEADED GASOLINE))
05AC1−02
TERMINALS OF ECU
1. CHECK TRANSPONDER KEY AMPLIFIER
I13
B65593
(a) Disconnect the I13 amplifier connector, and check the continuity of each terminal of the wire harness
side connector.
Standard:
Symbols (Terminal No.) Wiring Color Condition Specified Condition
GND (I13−7) Û
BR Û − Constant Continuity
Body ground
If the result is not as specified, there may be a malfunction on the wire harness side.
(b) Reconnect the I13 amplifier connector, and check the continuity or voltage of each terminal of the con-
nector.
Standard:
Symbols (Terminal No.) Wiring Color Condition Specified Condition
VC5 (I13−1) Û
R Û BR No key in ignition key cylinder ® With key 0 V ® 10 − 14 V
GND (I13−7)
CODE(I13−4) Û
Y Û BR No key in ignition key cylinder ® With key Waveform 1
GND (I13−7)
TXCK (I13−5) Û
Y−B Û BR No key in ignition key cylinder ® With key Waveform 2
GND (I13−7)
GND (I13−7) Û
BR Û − Constant Continuity
Body ground
B52545
20 ms Waveform 2 (Reference):
5V
Terminal TXCK Û GND
Tool setting 5 V/DIV., 20 ms/DIV.
Condition Ignition switch ON
B52544
T9
B50659
(a) Disconnect the T9 ECU connector, and check the voltage or continuity between each terminal of the
wire harness side connector.
Standard:
Symbols (Terminal No.) Wiring Color Condition Specified Condition
GND (T9−14) Û
W−B Û − Constant Continuity
Body ground
+B (T9−1) Û
W−R Û W−B Constant 10 − 14 V
GND (T9−14)
IG (T9−2) Û
B−R Û W−B Ignition switch OFF ® ON 0 V ® 10 − 14 V
GND (T9−14)
KSW (T9−10) Û
G−Y Û W−B No key in the ignition key cylinder ® With key No continuity ® Continuity
GND (T9−14)
AGND (T9−13) Û
BR Û − Constant Continuity
Body ground
If the result is not as specified, there may be a malfunction on the wire harness side.
(b) Reconnect the T9 ECU connector, and check the voltage between each terminal of the connector.
Standard:
Symbols (Terminal No.) Wiring Color Condition Specified Condition
KSW (T9−10) Û
G−Y Û W−B No key in ignition key cylinder ® With key 10 − 14 V ® 0 V
GND (T9−14)
VC5 (T9−8) Û
R Û W−B Ignition switch OFF ® ON 0 V ® 10 − 14 V
GND (T9−14)
TXCT (T9−12) Û
Y−B Û W−B Ignition switch OFF ® ON Waveform 1
GND (T9−14)
CODE (T9−11) Û
Y Û W−B Ignition switch OFF ® ON Waveform 2
GND (T9−14)
EFIO (T9−6) Û
W−R Û W−B Ignition switch OFF ® ON Waveform 3
GND (T9−14)
EFII (T9−7) Û
L−R Û W−B Ignition switch OFF ® ON Waveform 4
GND (T9−14)
If the result is not as specified, the transponder key ECU assy may malfunction.
B52544
20 ms Waveform 2 (Reference):
10 V
Terminal CODE Û GND
Tool setting 10 V/DIV., 20 ms/DIV.
Condition Ignition switch ON
B52545
5 ms Waveform 3 (Reference):
5V
Terminal EFIO Û GND
Tool setting 5 V/DIV., 5 ms/DIV.
Condition Ignition switch ON
B52547
20 ms Waveform 4 (Reference):
10 V
Terminal EFII Û GND
Tool setting 10 V/DIV., 20 ms/DIV.
Condition Ignition switch ON
B52546
3. INSPECT ECM
3RZ−FE engine (Leaded gasoline):
A73588
(a) Disconnect the the E10 and E12 ECM connectors, and check the voltage or continuity between each
terminal of the wire harness side connectors.
Standard:
Symbols (Terminal No.) Wiring Color Condition Specified Condition
IMI (E10−19) Û
W−R Û BR No key in ignition key cylinder ® With key Waveform 1
E1 (E12−24)
IMO (E10−8) Û
L−R Û BR No key in ignition key cylinder ® With key Waveform 2
E1 (E12−24)
E1 (E12−24) Û
BR Û − Constant Continuity
Body ground
If the result is not as specified, there may be a malfunction on the wire harness side.
1KD−FTV engine:
9 8 7 6 5 4 3 2 1 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1 7 6 5 4 3 2 1
21201918 1716 1514 1312 11 10 1615 1413 12 1110 9 8 1918 1716 1514 1312 1110 15 1413 12 1110 9 8
313029 28 27 26 2524 23 22 24 23 22 21201918 17 28 2726 2524 23 22 2120 22 21201918 1716
A09639
(b) Disconnect the the E10 and E13 ECM connectors, and check the voltage or continuity between each
terminal of the wire harness side connectors.
Standard:
Symbols (Terminal No.) Wiring Color Condition Specified Condition
IMI (E10−14) Û
W−R Û BR No key in ignition key cylinder ® With key Waveform 1
E1 (E13−22)
IMO (E10−21) Û
L−R Û BR No key in ignition key cylinder ® With key Waveform 2
E1 (E13−22)
E1 (E13−22) Û
BR Û − Constant Continuity
Body ground
If the result is not as specified, there may be a malfunction on the wire harness side.
1KZ−TE engine:
9 8 7 6 5 4 3 2 1 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1 7 6 5 4 3 2 1
21201918 1716 1514 1312 11 10 1615 1413 12 1110 9 8 1918 1716 1514 1312 1110 15 1413 12 1110 9 8
313029 28 27 26 2524 23 22 24 23 22 21201918 17 28 2726 2524 23 22 2120 22 21201918 1716
A09639
(c) Disconnect the the E11 and E12 ECM connectors, and check the voltage or continuity between each
terminal of the wire harness side connectors.
Standard:
Symbols (Terminal No.) Wiring Color Condition Specified Condition
IMI (E11−7) Û
W−R Û BR No key in ignition key cylinder ® With key Waveform 1
E1 (E12−22)
IMO (E9−15) Û
L−R Û BR No key in ignition key cylinder ® With key Waveform 2
E1 (E12−22)
E1 (E12−22) Û
BR Û − Constant Continuity
Body ground
If the result is not as specified, there may be a malfunction on the wire harness side.
5L−E engine:
13 12 11 10 9 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 6 5 4 3 2 1 11 10 9 8 7 6 5 4 3 2 1
26 25 24 23 22 21 20 19 18 17 16 15 14 16 15 14 13 12 11 10 9 12 11 10 9 8 7 22 21 20 19 18 17 16 15 14 13 12
A02958
(d) Disconnect the the E10 and E12 ECM connectors, and check the voltage or continuity between each
terminal of the wire harness side connectors.
Standard:
Symbols (Terminal No.) Wiring Color Condition Specified Condition
IMI (E10−18) Û
W−R Û BR No key in ignition key cylinder ® With key Waveform 1
E1 (E12−14)
IMO (E10−7) Û
L−R Û BR No key in ignition key cylinder ® With key Waveform 2
E1 (E12−14)
E1 (E12−14) Û
BR Û − Constant Continuity
Body ground
If the result is not as specified, there may be a malfunction on the wire harness side.
B52546
5 ms Waveform 2 (Reference):
5V
Terminal IMO Û GND
Tool setting 5 V/DIV., 5 ms/DIV.
Condition Ignition switch ON
B52547