2. . Explain Floor space Index. 3. Explain grouping as principle of planning. 4. Explain grouping as principle of planning 5. Define (1) Rise (2) Navel post (3) Flight (4) Landing for a stair. 6. State safety measures for a lift. 7. Explain the method of projection used for building drawing. 8. State the purposes of building byelaws. 9. Draw neat sketch of RCC chajja. 10.Draw neat sketch of King post roof truss. 11.Compare one point perspective view with two point perspective view 12.Draw line plan for a residential building for the data given below. Plot size is 15mt.x22mt having road on one of the shorter side. Accommodate Drawing room, Bed room, Kitchen, Dining room, store, stair and Bath and WC in your planning. Suitable space for verandah and passage may be provided. Assume other necessary data. Provide necessary margins. 13.Draw wall plan for line plan developed in question 12(above plan) 14.Draw front elevation for plan developed in question12(aboveplan) 15.) Explain the importance if civil engineering drawing. 16.Explain the fire safety measure for a building. 17.Draw neat sketch of lean to roof truss 18.Draw line plan of a shopping mall. 19.Write down purposes of building bye laws. 20.Draw C/S of 20 cm thick wall. 21.Draw neat sketch of paneled door. 22.What points will you keep in your mind for planning on a sloping ground? 23.What is the importance of perspective view? Give characteristics of two point perspective view