Professional Documents
Culture Documents
Crystal Wedding Set CreativeBeaading
Crystal Wedding Set CreativeBeaading
Wedding Set
PROJECT
TOOLS
Pliers
Diagram 4.
Beading needle Diagram 1.
Thread zap STEP FIVE
STEP TWO Take the bottom thread add 4 x seed bead,
Having two threads going towards the top, 1 x bi-cone and 4 x seed bead. Then take
LENGTH adjustable with
chain and two threads at bottom. Add 1 x bi-cone the thread up into the seed bead on middle
on top threads and 1 x bi-cone and 1 x seed threads. Diagram 5a.
bead bottom threads. Diagram 2.
EARRINGS
MATERIALS
Fireline
Earing Hooks
Diagram 2.
BEADS a
24 x 11° Miyuki seed STEP THREE
10 x 8mm crystal bi-cones Separate the bottom threads and add 1 x
bi-cone and 1 x seed bead onto the thread
b
closet to the bottom. Cross the two upper
threads through the last seed bead added
and pull tight. Diagram 3. Diagram 5.
STEP SIX
Pick up 1 x bi-cone and 1 x seed bead
and cross the top thread into the last seed
bead Diagram 5b. added and pull tight.
You should now have 1 thread at the top,
Diagram 3.
2 threads in the middle and 1 thread at the
bottom.
28 Creative Beading
in middle and 1 thread at the bottom. Pick
up 1 x seed bead, 1 x bi-cone and 1 x seed
bead onto top threads, take middle and
bottom thread up into last seed bead. Pull
all threads tight to close any gaps before
making the final ring.
Diagram 7.
STEP ELEVEN
Pick up 6 x seed bead onto two of the
threads and with the other two threads,
cross over to form a circle. With a big-eyed
needle take two threads and follow the
thread path all the way to the other side
making knots along the way. Repeat with last
two threads this time follow the thread path
of the seed bead and bi-cone at the bottom.
Diagram 6.
Once the 4 threads meet up again knot
On middle thread pick up 1 x bi-cone and them together and with the thread zap trim
1 x seed bead, and put aside. On bottom all tails away.
thread pick up 4 x seed bead, 1 x bi-cone and
4 x seed bead cross over into last seed bead STEP TWELVE
on middle thread, pull tight. Diagram 6. Cut chain and attach a 4mm jump ring to
the seed bead loop and onto the chain, close
STEP NINE jump ring. Attach a 4mm jump ring and clasp
Thread 1 x bi-cone and 1 x seed bead on to the other end of the chain. Repeat on other
what was the middle thread and set aside. side. Optional you
Take the top two threads and go into the seed can add a safety
bead on middle thread. Diagram 7. chain when adding
(Note: your threads should now be 1 thread at the clasp.
top, two threads in middle and 1 thread at the
bottom. (As you go on with this pattern your EARRINGS
threads will be re-aligned.) STEP ONE
Cut 80cm of Fireline
STEP TEN for each earring.
Repeat Step Eight until you have added 78 Pick up 1 bi-cone,
bi-cones and two threads at top, 1 thread 1 x seed bead, 1 x Diagram 8.
30 Creative Beading
bi-cone, 1 x seed bead, and 1 x bi-cone, lastly beads on right thread.
pick up 1 x seed bead. Diagram 9.
Creative Beading 31