LEP ENGINEERING MATERIAL SPECIFICATION
Material Mame Fite control mo. Spec! #feation Mumber
PLATING, ZINC OVER FERROUS SURFACES SMT5001PJ0120 WSD-M1P85-Al
5.0 micrometres
PLATING, ZINC OVER FERROUS SURFACES SMTSOO1PJO121 WSD-M1PB5-A2
8.0 micrometres
PLATING, ZINC OVER FERROUS SURFACES ‘SMT5001P50122 WSD-M1P85-a3
13/0 micrometres
1. SCOPE
These specifications define performance requirements for the electrolytic
or non-electrolytic deposition of zinc coatings.
2. APPLICATION
These specifications wore released originally to define performance
Fequirements for zinc coatings where corrosion protective and/or
decorative finishes on ferrous surfaces are required.
A supplomentary chromate treatment, per specification WSB-MIOP1O may be
spplied to zinc coated parts to retard tha formation of white corrosion
products.
3. REQUIREMENTS
All requirements identified for each specification must be act to achieve
acceptable field durability. No one requirement, exclusiva of others, is
capable of insuring satisfactory performance. Any deviations to the
requirements of these specifications may be subject to additional
Performance requirements.
3.1 STATISTICAL PROCESS
Suppliers must conform to the requirements of Ford Quality System
Standard Q-101. A mutually acceptable Control Plan as described
therein is required for material/source approval. Appropriate
statistical tools must be used to analyze process/product data se
ation in the final product is continuously reduced.
3.2 PLAYING THICKNESS AND CORROSION RESISTANCE, min
Specification Placing Salt Spray
Number Thickness Test Duration
micrometres hours
WSD-M1P85-A1 5.0 24
WSD-M1P85-A2 8.0 48
WSD-M1P85-A3 13.0 96
Release/Revision
1988 02 26 [suyer 2835 TC |Released. J PC Lines. EAO. ii
WP 2948-a Page 1 of 3