Professional Documents
Culture Documents
Firmwares Update
Firmwares Update
Thanks for your support for Quest Metal Detectors. We are glad to notify you the Q30 and Q60 series products firmware upgrading is ready to use in our
Quest Go app. You can download and upgrade the detectors firmware thru your smartphones.
In this upgrading, we optimized the target ID reading issue for deep targets. In the recent version the target ID may not be displayed even the audio signal is
clear. You may update the firmwares via QuestGo app, and we hope the new firmware will bring you much better hunting experience. Below are the guidance
for the firmwares updating. We have also fixed the APP's community pictures display issue.
PREPARATION
1, Phone with installed QuestGo App and fully charged
To update the firmwares, you need to download QuestGo app from Appstore , GooglePlay store or our official website and install it.
If you already have the installed QuestGO App, please update the QuestGO App to the latest edition
2, Fully charged detector and smartphone.
3, Activate the Bluetooth function of your smartphone.