Professional Documents
Culture Documents
Features
Applications
• Supply Voltage Range from 1.65V to 3.6V
• General Purpose Logic
• Sinks or Sources 24mA at VCC = 3V
• Bus Driving
• CMOS Low Power Consumption
• Power Down Signal Isolation
• IOFF Supports Partial Power Down Operation
• Wide array of products such as:
• Inputs or Outputs Accept Up to 5.5V
PCs, Notebooks, Netbooks, Ultrabooks
• Inputs Can Be Driven by 3.3V or 5V Allowing for Mixed Voltage
Networking Computer Peripherals, Hard Drives, CD/DVD
Applications
ROM
• Schmitt Trigger Action at All Inputs
TV, DVD, DVR, Set Top Box
• Typical VOLP (Quiet Output Ground Bounce) Less Than 0.8V with
VCC = 3.3V and TA = +25°C
• Typical VOHV (Quiet Output dynamic VOH) Greater than 2.0V with
VCC = 3.3V and TA = +25°C
• ESD Protection Tested per JESD 22
Exceeds 200-V Machine Model (A115)
Exceeds 2000-V Human Body Model (A114)
Exceeds 1000-V Charged Device Model (C101)
• Latch-Up Exceeds 250mA per JESD 78, Class I
• All devices are:
Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free,
"Green" and Lead-Free.
3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Ordering Information
74 LVC 540A xxx -13
Electrical Characteristics
TA = -40°C to +85°C TA = +85°C to +125°C
Symbol Parameter Test Conditions VCC Unit
Min Max Min Max
1.65V to 1.95V VCC X 0.65 — VCC X 0.65 —
High-Level Input
VIH 2.3V to 2.7V 1.7 — 1.7 — V
Voltage
3.0V to 3.6V 2 — 2 —
1.65V to 1.95V — VCC X 0.35 — VCC X 0.35
VIL Low-Level Input voltage 2.3V to 2.7V — 0.7 — 0.7 V
3.0V to 3.6V — 0.8 — 0.8
NEW PRODUCT
Switching Characteristics
Test TA = +25°C -40°C to +85°C +85°C to +125°C
Symbol Parameter VCC Unit
Conditions Min Typ Max Min Max Min Max
1.8V ± 0.15V 1 6.0 12.2 1 16.4 1 17.9
Propagation 2.5V ± 0.3V 1 3.9 7.6 1 8.6 1 9.7
Figure 1
tPD Delay AN to YN ns
2.7V 1 4.2 7.2 1 7.8 1 8.9
3.3V ± 0.3V 1.5 3.8 6.5 1.5 6.9 1.5 7.8
1.8V ± 0.15V 1 7 14.8 1 16.5 1 18.5
Enable Time Figure 1 2.5V ± 0.3V 1 4.5 10 1 10.5 1 12.4
tEN ns
OE to YN 2.7V 1 5.4 8.3 1 9.0 1 11.5
3.3V ± 0.3V 1.5 4.4 6.4 1.5 6.6 1.5 8.0
1.8V ± 0.15V 1 7.8 15.5 1 16.4 1 18.2
Disable Time Figure 1 2.5 V ± 0.3V 1 5 8.7 1 9.0 1 9.6
tDIS ns
OE to YN 2.7V 1 4.4 8.0 1 8.2 1 10.0
3.3V ± 0.3V 1.7 4.1 7.1 1.7 7.4 1.7 9.0
Output Skew
tsk(0) 3.3V ± 0.3V 1.0 1.5 ns
Time
Operating Characteristics
TA = +25°C
Symbol Parameter Test Conditions VCC Typ Unit
1.8V ± 0.15V 9.9
Power dissipation F= 10 MHz
Cpd 2.5V ± 0.3V 10.2 pF
capacitance per gate Outputs Enabled
3.3V ± 0.3V 10.6
Package Characteristics
NEW PRODUCT
TEST S1
tPLH/tPHL Open
tPLZ/tPZL Vload
tPHZ/tPZH GND
NEW PRODUCT
Inputs
VCC VM VLOAD CL RL V∆
VI tr/tf
1.8V ± 0.15V VCC ≤2ns VCC/2 2 x VCC 30pF 1KΩ 0.15V
2.5V ± 0.2V VCC ≤2ns VCC/2 2 x VCC 30pF 500Ω 0.15V
2.7V 2.7V ≤2.5ns 1.5V 6V 50pF 500Ω 0.3V
3.3V ± 0.3V 2.7V ≤2.5ns 1.5V 6V 50pF 500Ω 0.3V
Marking Information
(1) TSSOP20
74LVC540A
NEW PRODUCT
( Top View )
(1) TSSOP-20
D
TSSOP-20
Dim Min Max Typ
A - 1.20 -
A1 0.05 0.15 -
θ2
A2 0.80 1.05 -
b 0.19 0.30 -
NEW PRODUCT
c 0.09 0.20 -
E1 E
0.25 D 6.40 6.60 6.50
Gauge Plane
E 6.20 6.60 6.40
θ3 E1 4.30 4.50 4.40
PIN 1
ID MARK e 0.65 BSC
θ1
Seating Plane L 0.45 0.75 0.60
e
L L1 1.0 REF
DETAIL θ1 0° 8° -
L1
θ2 10° 14° 12°
θ3 10° 14° 12°
A2 A
All Dimensions in mm
b
A1
A
3
A
V-QFN4525-20
Dim Min Max Typ
S
e
a
t
i
n
g
P
l
a
n
e
A3 - - 0.15
e
e 0.50BSC
E
2
Z1 - - 0.885
All Dimensions in mm
L
2
0
x
︵ ︶
b
2
0
x
Z
4
x
︵ ︶ ︵ ︶
(1) TSSOP-20
X (20x)
C
X 0.420
X1 6.270
Y1 Y2 Y 1.789
Y1 4.160
Y (20x) Y2 7.720
X1
X2 3.200
X
2
X3 3.830
X4 4.800
Y
3
Y
1
Y 0.600
Y1 1.200
Y2 0.830
Y
2
Y3 2.800
Y
X
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
NEW PRODUCT
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
www.diodes.com