Professional Documents
Culture Documents
Description Advantages
MASTERTOP® 1250 is a hardwearing epoxy floor • High mechanical strength
screed which utilises blends of coloured • Impact and abrasion resistant
aggregates to produce a highly decorative finish in • Slip resistant
thicknesses of 5mm and above. • Non tainting
• Excellent chemical resistance
Primary uses • Decorative appearance
MASTERTOP® 1250 has excellent mechanical • Seamless
properties and offers superior abrasion and wear
characteristics for areas subjected to medium to System components
heavy traffic. MASTERTOP® 1250 is supplied in the following
packaging
MASTERTOP® 1250 has good general chemical
resistance, but as in all corrosive situations a full Primer ®
MASTERTOP 1240 / 1250 Plus 2.8kg
analysis of operating and exposure conditions is Primer
®
Screed MASTERTOP 1250 Plus Resin 2.8kg
required, followed by reference to chemical
(2 components)
resistance data, to ensure product suitability. Filler F3 25kg
®
Coving - MASTERTOP 1250 Plus Resin 2.8kg
MASTERTOP® 1250 is the ultimate combination of (2 components)
performance and aesthetics, as such is ideal for - Filler F3 25kg
- Thixotrope 2.93kg
applications where durability and visual ®
Sealer MASTERTOP 1250 Plus Resin 2.8kg
appearance are important. st
1 Coat (2 Components)
®
Optional MASTERTOP TC 407 W 10kg
® nd
MASTERTOP 1250 may be applied in the 2 Coat (2 Components)
following environments:
*Typical properties
NB This gives examples only and does not Mechanical properties: (cured 7 days at 20°C)
Flexural strength (DIN 1048) 15N/mm²
constitute a full and comprehensive list. For
Bonding strength Greater than cohesive
further information on application possibilities strength of good quality
contact BASF Construction Chemicals UAE LLC. concrete
• Schools and hospitals Temperature resistance: -20°C to +60°C
Minimum curing +10°C (temperature of air
• Shops and showrooms
temperature and substrate)
• Changing rooms / showers
• Public Areas
MASTERTOP® 1250
Coverage Existing concrete:
All contamination must be removed and a sound,
Primer Mastertop 1240 / 1250 0.2-0.3kg/m² clean substrate exposed. Mechanical means of
Plus Primer preparation are preferred followed by the removal
Screed & Mastertop 1250 Plus 9.5kg/m² @ of dust and other loose debris using an industrial
Coving Resin + F3 + Thixotrope 5mm
vacuum.
(excluding
cove radius)
In areas of deeply penetrating contamination by
Sealer 1st Mastertop 1250 Plus 0.2-0.3kg/m²
Coat Resin oils, greases and fats, hot compressed air,
Optional Mastertop TC 407 W 0.1-0.12kg/m² followed by impregnation with a low viscosity
2nd Coat sealer / primer is the recommended treatment.
Note
Field service, where provided, does not constitute
supervisory responsibility. For additional
information contact your local BASF
representative.
Whilst any information contained herein is true, accurate and represents our best knowledge and experience, no warranty is given or implied with
any recommendations made by us, our representatives or distributors, as the conditions of use and the competence of any labour involved in the
application are beyond our control.
As all BASF technical datasheets are updated on a regular basis it is the user's responsibility to obtain the most recent issue.