Professional Documents
Culture Documents
Bellhousing Series
SERIES LMC
LMC series monobloc bell housings are used to connect
between UNEL-MEC electric motors (form B3 - B5) and a
loide range of hydraulic pumps available on the internatio-
nal market.
With special machining, they can become motor bases on
which it is possible to fit standard flanges produced by
MP Filtri S.P.A. (MODUL-2).
Due to their considerable flexibility and the vast range of
the LMC series monobloc bell housings are suitable for
most applications, and offer an operational range from
0.5 kW
size 80 electric motors to 30 kW, frame size 225 electric
motors.
Te c h n i c a l d a t a
Te m p e r a t u re range
• Working temperature
from -30°C to +80°C
For values outside these temperature s ,
please consult our Sales Network Organisation.
Special applications
• For applications not included in this brochure, please consult our technical office.
1
Bellhousing_coupling_uk.qxd 28-07-2008 12:16 Pagina 5 (3,1)
This catalogue provides the technical and dimensional characteristics to correctly select
the LMC low noise bellhousing.
• Once the motor power and the type of hydraulic pump have • All the available combinations between motor base
been selected, you will need to determine the corre c t and flanges are shown in chart 2. With the information,
flange pump for the type of motor & pump. establish exactly the H1 dimensions of the LMC
bellhousing and the exact ordering code.
Version available
• Monobloc bellhousing: bellhousing complete with machined pump interface; flange code FS*
• MODUL 2 bellhousing: pump interface machined on a supplementary flange and assembled to the monobloc bellhousing;
flange code FR* - F5* - F6*
DATA
A
Am Motor shaft length Am B Ap
B Spider element Thickness H1 Ideal
Ap Total length of the pump shaft (including pump spigot)
NB. For coupling selection see “GENERAL CATALOGUE OF COMPONENTS FOR MOTOR-PUMP COUPLINGS
ARRANGEMENTS”
2
Bellhousing_coupling_uk.qxd 28-07-2008 12:16 Pagina 7 (1,1)
Bell housing
H2
P F H1
H1
The additional flange, if request, is supplied already fitted on the bell housing (MODUL-2).
Drive coupling not included in the ordering code- please see page 41.
– For technical information, see paragraph “DRIVE COUPLINGS” page 41
– For loose components see pages 7-8-9-10
NB Drill the hole in the cover of the tank at least 2 mm larger than measurement D5
CHART 1
4 poles 1500 rpm motor LMC monobloc bell housing dimensions
Motor Motor Foot bracket
Frame Size kW Hp shaft Bell housing code Code D1 D2 D3 D4 D5 H1 H2 F. Nr. P Nr.
80 0.53-0.75 0.75-1 19x40 LMC 200 PDM A 200 130 165 200 125 135 18 M10 4 11 4
90 1.1-1.5 1.5-2 24x50 LMC 200 PDM A 200 130 165 200 125 135 18 M10 4 11 4
100-112 2.2-4 3-5.5 28x60 LMC 250 PDM A 250 180 215 250 175 186 19 M12 4 14 4
132 5.5-7.5 7.5-12.5 38x80 LMC 300 PDM A 300 230 265 300 230 235 23 M12 4 14 4
160 11-15 15-20 42x110 LMC 350 PDM A 350 250 300 350 240 254 31 M16 4 18 4
180 18.5-22 25-30 48x110 LMC 350 PDM A 350 250 300 350 240 254 31 M16 4 18 4
200 37 45 55x140 LMC 400 / 300 350 400 280 305 31 M16 8 - -
225 37-45 50-60 60x140 LMC 450 / 350 400 450 320 350 31 M16 8 - -
See
Tab.
2
3
Bellhousing_coupling_uk.qxd 28-07-2008 12:16 Pagina 7 (3,1)
CHART 2
Monobloc Modul 2
Code H1 Notes Code H1 Notes
F S J *** 100 LMC 200 F 5 A *** 218
Additional
F S W* * * 125 LMC 200 F 5 B *** 224 flange
F S M* * * 114 LMC 250 F 6 A *** 239 for
F S Q *** 136 LMC 250 F 6 B *** 252 LMC 350
F R A* * * 153 Additional
flange
F R B* * * 156
for
F R C* * * 161 LMC 250
F R A* * * 185
F R B* * * 191
Additional
F R C* * * 193 flange
F R D *** 201 for
F 5 A *** 192 LMC 300
F 5 B *** 198
N B . The 3 asterisks in the table represent the 3 numerals determining the pump drilling code (see Page 39).
4
Bellhousing_coupling_uk.qxd 28-07-2008 12:16 Pagina 7 (5,1)
Ordering code
LMC 2 50 - A - FS Q 0 72 - P00
Series
Nominal
size
see chart 1
Page 3
Product
revision number
Pump flange
see Page 39
P** Personalisation
FG Inspection Hole
45° rounded
of page 39
FI Inspection Hole
Foot bracket
PDM - A - 250
Series Nominal
size
see chart 19
Page 50
NB. For all special requirements please contact our sales dpt.
5
Bellhousing_coupling_uk.qxd 28-07-2008 12:16 Pagina 10 (1,1)
Comparative table