Professional Documents
Culture Documents
Standard configuration
• FBLG* ranges
- FBLGS = standard unit width (2.6 m) Fincoil FBLG
- FBLGC = container unit width (2.3 m)
- FBLGE = custom coil width • Fitted with header tube protection panels.
- FBLGA = special coil configuration • Manual venting and draining valves.
- FBLGY = stainless steel tubing • Partitions between fans for regulation of the cooler
• Finned coil capacity by means of separate use of the fans.
--Copper or stainless steel tubes (FBLGY) • Transportation either in wooden seaworthy packing
--corrugated Al-fins 0.18 mm, no turbulators or standard 40'/45’ container. Also suitable for truck
--fin spacing 2.3 to 4 mm transportation.
• Direct driven axial fans, suitable for use with frequency
converters. When designing a frequency converter
Benefits
system, the general guidelines for allowed cable lengths,
sinus filters, dU/dT filters etc. have to be considered. • Factory tested plug & play units, easily connectable.
• Short assembly time on site.
• Fan motors available for various power supplies.
• Heavy duty coil & casing materials.
The motors are squirrel-cage motors for outdoor use built
• The close tube spacing and the specially corrugated fins
to IEC standards and provided with condensing water
make the heat transfer section extremely efficient.
outlets and shaft seals together with H-class insulation.
• Plain profile fins without turbulators make the coil less
Protection class for motors is IP55, except for the
prone to fouling and easier to clean.
condensing water outlets. The motors are prewired to
• Motors built to IEC standards facilitate spare part service
lockable service switches.
all over the world.
• Fan diameters 1.2 or 1.8 meter. • Robust construction, no service platform required.
• All casing parts are hot dip galvanized steel or pre-coated • Energy efficient - low total cost of
galvanized sheet steel. ownership.
• Specifically designed for multiple installations with several • One full year product guarantee.
radiators installed side by side.
Fincoil FBL
Options
• Coil corrosion protection
--epoxy coated aluminium fins (EP)
--copper fins (CU)
--sea water resistant aluminium fins (SWR)
--F-coating, FBGLA only (FC)
--Blygold coating, FBGLA only (BY)
• Dual coil models with LT- and HT-circuits
• Higher design pressures
• Mounting legs (up to 6m)
• Handrails and ladder for radiator group
• Flexible connection joints
• Epoxy painted casing (RAL colours)
• Fan speed control Design pressure
--step control (SC) Design pressure 10 barg. Each heat exchanger is leak tested
--frequency control (SVC) with dry air at 15 barg. Higher design pressures on request.
• Common terminal box located in the end of radiator
Selection
• Motor protective switch panel FBLG liquid coolers are always selected and customized on
• Special fan motors (EX-classed, NEMA etc.) customer request. Please contact Alfa LU-VE for selections.
AHE00043EN 2012 Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.