Summary of Current Competencies versus Required Competencies Required Units of Current Training Competency/Learning Competencies Gaps/Requirements Outcomes based on CBC 1. Perform roughing-in, wiring and cabling works for single-phase distribution, power, lighting and auxiliary systems 1.1. Install electrical Install electrical metallic /non- metallic metallic /non- (PVC conduit) metallic (PVC conduit) 1.2. Install wire ways and Install wire ways and cable tray cable tray 1.3 Install auxiliary Install auxiliary terminal cabinet and terminal cabinet and distribution panel distribution panel 1.4 Prepare for cable pulling Prepare for cable and installation pulling and installation 1.5. Perform wiring and Perform wiring and cabling lay out cabling lay out 1.6. Notify completion of work Notify completion of work 2. Install electrical protective devices for distribution, power, lighting, auxiliary, lightning protection and grounding systems 2.1 Plan and prepare work Plan and prepare work
and auxiliary outlet and auxiliary outlet 2.2 2.4. Notify completion of Notify completion of work work
3. Install wiring devices of floor and wall mounted outlets, lighting
fixtures/switches and auxiliary outlets 3.1 Select wiring devices Select wiring devices 3.2. Install wiring devices Install wiring devices 3.3. Install lighting Install lighting fixtures/switches fixtures/switches 3.4. Notify completion of Notify completion of work work
Date Developed: Document No.
Form 1.3 May 2019 VPC-EIMNC2-CBLM01 Identifying Date Revised: Issued by: Training Gaps on Page Electrical Developed by: 1 of 3 Installation and Jayson D. Dela Torre Revision #00 Maintenance