Professional Documents
Culture Documents
Installation and
licensing
2022-08
Contents
1. FluidSIM installation 4
Chapter 1
1. FluidSI M installation
You have received a download link from Festo to an ISO image file
fluidsim6.iso. Download this file. ISO image files can be
temporarily mounted by Windows like a DVD drive with a drive
letter.
If the ISO file is not mounted in your file system with a double-click,
then right-click on the file to call up the context menu and select
“Open with / Windows Explorer”.
The ISO file is now temporarily mounted like a DVD drive. Double-
click setup.exe to launch the installer.
On the start page of the installer, you can select the language to be
used during the installation. With Install FluidSIM the installation
is started. The Install License Server selection is described in
section Installing the CodeMeter license server and the Activate
License... selection is described in section Using offline licenses.
Full version with ticket num- If you have purchased a full version with a ticket number, you can
ber enter this number here.
Online license If you would like to use FluidSIM only online with a permanent
Internet connection, then enter your group name here, which you
(Login with group and pass- have received from your teaching institute or from Festo, for exam-
word) ple. In addition, you must enter your name in the corresponding
field.
Do not set licensing type now Select this option if you have already activated your licenses with a
ticket number or if you do not want to specify the licensing type
now. You can also activate licenses after installing FluidSIM.
If you would like to install FluidSIM under a user with limited rights,
exit the installation program after the CodeMeter Runtime has been
installed and start it again.
Here you can specify whether FluidSIM should be installed for all
users or only for the currently logged in user.
By default, the educational films are copied to the hard disk. If you
want to save storage space, you can deselect the corresponding
educational films. The hydraulics educational films require approx.
2.6 GB and the pneumatics educational films approx. 1.7 GB of
additional storage space.
Finally, you can select the destination folder and start the installa-
tion.
NOVIDEOS_HYD=1 By default, the hydraulics didactics videos are installed. The videos
will not be installed if this parameter is set.
NOVIDEOS_PNEU=1 By default, the pneumatics didactic videos are installed. The videos
will not be installed if this parameter is set.
AUTOUPDATES=[n] In the options of FluidSIM you can set whether updates are
searched for at program start. By default, FluidSIM informs about
new updates. With the command line parameter AUTOUPDATES
the default setting is set to the option specified here every time the
program is started. Valid values for [n] are 0, 1, 2 or 3 with the
following meaning:
0 = Disable automatic updates
1 = Notify about updates
2 = Notify about updates and download automatically
ALLUSERS="" By default, the installation is performed for all users. If this parame-
ter is not used, the installation will be performed only for the
logged-in user.
LANGUAGE="lang" By default FluidSIM is installed in the system language set and this
parameter does not need to be used. This parameter installs Flu-
idSIM in the specified language lang. Available languages are DE
for German, ENUS for English, ES for Spanish and FR for French.
This parameter is not available for MSI installation.
LICSERVER= If you use offline licenses via a CodeMeter license server from
"Server1;..;ServerN" Wibu, Server can be used to specify the CodeMeter license servers
in the local network as IP address or as server name. It is usually
only necessary to specify the license servers if the license servers
are located in a subnet.
remove_first=1 Uninstalls FluidSIM in the first step before performing the actual
installation. This may be necessary in rare cases when the existing
installation is corrupted.
This parameter is not available for MSI installation.
Example
setup.exe /qb INSTALLDIR="C:\FluidSIM6" NOVIDEOS_HYD=1
NOCODEMETER=1
Except as noted, the parameters listed above can also be used with
an MSI installation. The MSI files are located in the Support\Msi
folder on the installation media.
Example
msiexec /qb /i fluidsim6.msi INSTALLDIR="C:\FluidSIM6"
NOVIDEOS_HYD=1
Chapter 2
2. Installing the Code Meter license server
You can use any PC in your network as the license server. The
following conditions must be met for this:
— The client PCs must have access to the server PC via the LAN.
After the license server is installed, you have the option to activate
existing licenses via a ticket number. Details are described in chap-
ter Using offline licenses.
Chapter 3
3. Using offli ne licenses
The licenses associated with the ticket number can be used both
offline and online. For offline use, the licenses must be transferred
(activated) via the Internet to a local computer or a license server
(use as floating licenses) in the local network. After the licenses
have been transferred, an Internet connection is no longer required.
The use of online licenses is described in document “License Man-
ager”.
The table lists all licenses for your ticket number. Free licenses that
can be activated are displayed on a green background. If no free
licenses are available, you will be informed. Every line contains a
number of licenses of a product that can be activated or deactivat-
ed together.
Number of licenses Specifies the maximum number of licenses that can be activated or
deactivated.
CmContainer
License server Contains the name of the server with the corresponding CodeMeter
container. If the CodeMeter container cannot be found in the LAN,
this field is empty and the license cannot be deactivated.
The individual activation steps are carried out via the Internet and
highlighted in color.
Finally, you can close the activation wizard or have the current
license information displayed for your ticket via Back to license
overview .
You can now select the number of licenses you want to deactivate.
This dialog is skipped if only one license is available.
The individual deactivation steps are carried out via the Internet
and highlighted in color.
Finally, you can close the activation wizard or have the current
license information displayed for your ticket via Back to license
overview .
Finally, you can close the activation wizard or have the current
license information displayed for your ticket via Back to license
overview .
If you want to give back your license, you must deactivate it.
3.2 Troubleshooting
3. If the license server is not also the local computer, then the
“Server Access” option must be selected on the license server.
Next to the list of connected CodeMeter containers, you can use the
“WebAdmin” button to have detailed license information displayed
in the Internet browser and you can make various settings. The
WebAdmin is described in the next section.
On the license server, you can use the CodeMeter Control Center to
check if your CodeMeter containers really are available or connect-
ed. More information on the CodeMeter Control Center can be
found in the Help for the program.
3.2.2 WebAdmin
First, check if the new licenses are available on the license server.
Start the WebAdmin directly on the license server and check on the
“Containers” tab if your CodeMeter container is available with the
corresponding licenses.
If the license server is not the local computer and if the licenses are
to be available to other client computers, then the “Server Access”
option must be selected. You can configure this on the “Configura-
If your license server is not listed, there may be one of two reasons
for this.
You should now be able to select the license server at the bottom
left in the WebAdmin and you can then check on the “Container”
tab if your CodeMeter container is available with the corresponding
licenses on the license server.
Chapter 4
4. Using online lice nses / Start FluidSIM
Groupname Enter your group name here, which you have received from your
teaching institute or from Festo, for example.
Your name Enter your name here, which will be visible to the group members.
Password Enter the password here that you have received from your teaching
institute or from Festo, for example.
Chapter 5
5. Managing onl ine lice nses
The licenses associated with the ticket number can be used both
offline and online. All licenses that have not been transferred (acti-
vated) to a local computer or a license server in the local network
are automatically available for online use.
Example
You have purchased 10 licenses of FluidSIM Pneumatics full version
and received the associated ticket number “8A7T4-6P7GW-5YQLN-
4WDWL-KR3M7” from Festo. With this ticket number you have
transferred 7 licenses to a local network server as described in
section Using offline licenses.
The license manager does not have to run for using the online
licenses. The license manager is only required if you want to create
or change user groups, for example. During the administration you
need an internet connection.