You are on page 1of 42

AUTOFLUG GMBH

Industriestr. 10
D-25462 RELLINGEN
D1131

Linear Force Actuator

Part No. 176185


Part No. 176188

ABBREVIATED COMPONENT MAINTENANCE MANUAL


WITH
ILLUSTRATED PARTS LIST

21-22-97
Title Page
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

RECORD OF REVISIONS

REV. ISSUE INSERTION REV. ISSUE INSERTION


No DATE DATE BY No DATE DATE BY

01 N/A

02 N/A

03 MAR 13/15

21-22-97
ROR Page 1
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

LIST OF EFFECTIVE PAGES

SUBJECT PAGE DATE SUBJECT PAGE DATE

Title Page 1 Mar 13/15 Special Tools 901 Mar 13/15

Record of Revisions 1 Mar 13/15 Illustrated Parts List 1001 Mar 13/15

List of Effective Pages 1 Mar 13/15

Table of Contents 1 Mar 13/15

Table of Illustrations 1 Mar 13/15

List of Tables 1 Mar 13/15

Record of Temporary 1 Mar 13/15


Revisions

Service Bulletin List 1 Mar 13/15

List of Approved 1 Mar 13/15


Repair Facilities

List of Special 1 Mar 13/15


Materials

Introduction 1 Mar 13/15


2 Mar 13/15

Description and 1 Mar 13/15


Operation 2 Mar 13/15

Testing and 101 Mar 13/15


Fault Isolation

Disassembly 301 Mar 13/15

Cleaning 401 Mar 13/15

Check 501 Mar 13/15

Repair 601 Mar 13/15

Assembly 701 Mar 13/15

Fits and 801 Mar 13/15


Clearances

21-22-97
LEP Page 1
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

TABLE OF CONTENTS

Pages

INTRODUCTION ............................................................................................................. 1

1. General ......................................................................................................... 1
2. Presentation of Manual ................................................................................. 1

DESCRIPTION AND OPERATION.................................................................................. 1

1. Description .................................................................................................... 1
2. Leading Particulars ....................................................................................... 2

TESTING AND FAULT ISOLATION ................................................................................ 101

DISASSEMBLY ............................................................................................................... 301

CLEANING ...................................................................................................................... 401

CHECK ........................................................................................................................... 501

REPAIR ........................................................................................................................... 601

ASSEMBLY ..................................................................................................................... 701

FITS AND CLEARANCES ............................................................................................... 801

SPECIAL TOOLS ............................................................................................................ 901

ILLUSTRATED PARTS LIST ........................................................................................... 1001

21-22-97
TC Page 1
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

TABLE OF ILLUSTRATIONS

Pages

Figure 1 Linear Force Actuator ................................................................................... 1


Figure 2 Linear Force Actuator, Sectional View .......................................................... 2

21-22-97
TI Page 1
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

LIST OF TABLES

Not applicable.

21-22-97
LOT Page 1
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

RECORD OF TEMPORARY REVISIONS

TEMPORARY
REVISION INSERTED REMOVED
PAGE ISSUE
No NUMBER DATE DATE BY DATE BY

21-22-97
RTR Page 1/1
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

SERVICE BULLETIN LIST

SERVICE MODIFICATION
BULLETIN No No DATE DESCRIPTION

21-22-97
SBL Page 1/1
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

LIST OF APPROVED REPAIR FACILITIES

TRADE NAME ADDRESS

AUTOFLUG GMBH INDUSTRIESTRASSE 10


D-25462 RELLINGEN

21-22-97
LARF Page 1/1
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

LIST OF SPECIAL MATERIALS

UTILIZATION
T D C C R A S
E I L H E S T
S S E E P S O
DESIGNATION MAT FSCM OR T A A C A E R
& SUPPLIERS TRADE NAME I S N K I M A
SPECIFICATION No ADDRESS N S I S R B G
G E N L E
M G Y
B
L
Y

21-22-97
LOSM Page 1/1
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

INTRODUCTION

1. General

A. This Maintenance Manual has been prepared in accordance with Standard 100
of the AIR TRANSPORT ASSOCIATION OF AMERICA (Standard ATA 100).

B. The Manual provides all necessary information for aircraft operators regarding
linear force actuators P/N 176185 and 176188. It is the abbreviated version of
CMM 21-22-97 Rev. 3.

C. All maintenance and repair tasks are only to be done during maintenance at Au-
toflug GmbH facilities by CMM 21-22-97 Rev. 3.

2. Presentation of Manual

A. The standard page number blocks to be used for this Maintenance Manual are
as follows:

1 - 100 DESCRIPTION AND OPERATION


101 - 200 TESTING AND FAULT ISOLATION
201 - 300 NOT ASSIGNED
301 - 400 DISASSEMBLY
401 - 500 CLEANING
501 - 600 CHECK
601 - 700 REPAIR
701 - 800 ASSEMBLY (including STORAGE)
801 - 900 FITS AND CLEARANCES
901 - 1000 SPECIAL TOOLS
1001 - 1100 ILLUSTRATED PARTS LIST

B. All values are generally given in units (or multiples or sub-multiples of these
units) which belong to the System International (S.I.), such as meter, kilogram,
second. In certain cases, values may be given in more commonly-used units.

C. Revision

Detailed instructions with regard to insertion and deletion of affected pages will
be given whenever this Manual is revised.
Revised texts, new texts or deleted texts are marked with a vertical black line in
the left margin.

21-22-97
INTRO Page 1
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

DESCRIPTION AND OPERATION

1. Description

The Linear Force Actuator, Part Number 176185/176188 is developed for use in the Air
Conditioning System of the SUPER PUMA MK II, Civil Version helicopter.

The unit consists of a permanent magnet field DC motor, a reduction gear-train and a
spindle assy. The DC motor drives the spindle assy through the reduction gear-train,
thus transforming the rotary movement of the motor into a linear movement of the spin-
dle assy. Two adjustable micro switches limit the stroke of the actuator. Two integral
mechanical stops provide limitation of the absolute travel of the spindle assy. The stops
are of the non-jamming type. Radio interference suppression is provided by a built-in ra-
dio noise filter.

The Linear Force Actuator is operated from the 28 VDC power supply of the helicopter. If
power is applied to the actuator, depending upon the polarity, the spindle assy is ex-
tended or retraced until the limit switches S1 and S2 are actuated at the end of travel by
the spindle assy.

Figure 1 Linear Force Actuator

21-22-97
Page 1
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

2. Leading Particulars

Dimensions
Height 43 mm
Length (actuator extended) 241 mm
Depth 53 mm
Weight 0,3 kg
Power requirements 27,5 ± 0,5 VDC

Figure 2 Linear Force Actuator, Sectional View

1 Micro switch
2 Printed circuit board
3 Spindle assy
4 Reduction gear-train
5 DC motor

21-22-97
Page 2
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

TESTING AND FAULT ISOLATION

Tasks are only to be done during maintenance at Autoflug GmbH facilities by CMM 21-22-97
Rev. 3.

21-22-97
Page 101
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

DISASSEMBLY

Tasks are only to be done during maintenance at Autoflug GmbH facilities by CMM 21-22-97
Rev. 3.

21-22-97
Page 301
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

CLEANING

Tasks are only to be done during maintenance at Autoflug GmbH facilities by CMM 21-22-97
Rev. 3.

21-22-97
Page 401
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

CHECK

Tasks are only to be done during maintenance at Autoflug GmbH facilities by CMM 21-22-97
Rev. 3.

21-22-97
Page 501
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

REPAIR

Tasks are only to be done during maintenance at Autoflug GmbH facilities by CMM 21-22-97
Rev. 3.

21-22-97
Page 601
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

ASSEMBLY

Tasks are only to be done during maintenance at Autoflug GmbH facilities by CMM 21-22-97
Rev. 3.

21-22-97
Page 701
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

FITS AND CLEARANCES

Not applicable.

21-22-97
Page 801
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

SPECIAL TOOLS

Not applicable.

21-22-97
Page 901
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
THINKING S AF ETY
ABBREVIATED COMPONENT MAINTENANCE MANUAL
176185/176188

Illustrated Parts List

Not applicable for operators.

21-22-97
Page 1001
Mar 13/15

The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.

You might also like