Professional Documents
Culture Documents
Project Aaa
Project Aaa
3. Add three (3) new shape file with geometry type line.
4. Categorize files as :- i) Arterial
a) Length
b) Width
c) Fare /Km
6. In New shape file categorized as Arterial, trace the road to digitize for that:-
iv) After tracing right click and give a traced mark an ID.
iv) After tracing right click and give a traced mark an ID.
8. In New shape file categorized as Collector, trace the road to digitize for that:-
iv) After tracing right click and give a traced mark an ID.
9. After giving ever traced mark an ID in different categories, insert data in different fields, for that:-
i) Select shape file and press right click to select (open attribute table)
ii) To calculate length of the road:-
a) Select OPEN FIELD CALCULATOR from attribute table tool bar OR press Clt+I to open field
…………… … ….calculator .
iii) ADD all the Data according to the survey done on field.
10. Add data in every shape file’s field by same method as shown in step 9.
NOTE
3. Try to draw small segment for better accuracy in tracing the road.
4. Save progress in very frequent basis to keep the data save in case of software glitch.