Professional Documents
Culture Documents
Mytec01 201408E
Mytec01 201408E
Mytec 01
Top Box Side Frame Guide Wire
Product Name
Type Type Type
Link Type * * Product Code
Left Right Left Right
* * Operation Operation Operation Operation Oct. 2012
Double Bracket Plate White 30000129
RENEWAL
Black 30000128
White 30000133
Black 30000132
Gray 30000136
Black
*Use with Double Bracket Plate 30000135
Gray 30000140
Black
*Use with Double Bracket Plate 30000139
Black 30003519
White 30003520
Black 30000115 type, Guide Wire type, Link type and Double type.
Link Joint Pipe End
The Speed Controller installed in the Spring Drive
30000142
System, Mytec 01 prevents the blind from going up
rapidly.
Link Joint Pin
30000125
201408E
40
Mytec 01 Mytec 01
Light and smooth operation. A variety of optional parts responds to a wide range of use.
Mytec 01 Loop incorporates the spring assisted mechanism in its Chain Drive System and Both Mytec 01 Loop and Mytec 01 can meet various needs of installation sites through
Mytec 01 equips the Speed Controller with its Spring Drive System. attaching various optional parts to the standard products.
These two systems enable light and smooth operation of the blind. Especially Mytec 01 has high versatility.
Mytec 01 Loop
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)
Chain Drive System Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
The spring assisted
mechanism allows you
to operate the blind
with ease even for a
large or tall windows.
Standard
The Speed Controller installed in the Spring Drive System, Mytec 01 prevents
the blind from going up rapidly.
Mytec 01 slowly moves up at a constant speed Discomfort noise of collision between the Set Bar or
because the Speed Controller prevents its rapid uplift. window frame and the Weight Bar can be avoided also.
White Warm white Gray Black
Mytec 01 Ordinary Roller Blinds Mytec 01 Ordinary Roller Blinds
Stops calmly. Colliding sound. Most parts can be commonly used, resulting in decrease of inventory.
Key parts including Roller Pipe and Weight Bar can be commonly used for all types of the products.
It, therefore, realizes high working efficiency during assembly and decrease of inventory risk.
Gentle and smooth roll-up. Too quick and rough roll-up.
2 3
Mytec 01 Mytec 01
Light and smooth operation. A variety of optional parts responds to a wide range of use.
Mytec 01 Loop incorporates the spring assisted mechanism in its Chain Drive System and Both Mytec 01 Loop and Mytec 01 can meet various needs of installation sites through
Mytec 01 equips the Speed Controller with its Spring Drive System. attaching various optional parts to the standard products.
These two systems enable light and smooth operation of the blind. Especially Mytec 01 has high versatility.
Mytec 01 Loop
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)
Chain Drive System Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
The spring assisted
mechanism allows you
to operate the blind
with ease even for a
large or tall windows.
Standard
The Speed Controller installed in the Spring Drive System, Mytec 01 prevents
the blind from going up rapidly.
Mytec 01 slowly moves up at a constant speed Discomfort noise of collision between the Set Bar or
because the Speed Controller prevents its rapid uplift. window frame and the Weight Bar can be avoided also.
White Warm white Gray Black
Mytec 01 Ordinary Roller Blinds Mytec 01 Ordinary Roller Blinds
Stops calmly. Colliding sound. Most parts can be commonly used, resulting in decrease of inventory.
Key parts including Roller Pipe and Weight Bar can be commonly used for all types of the products.
It, therefore, realizes high working efficiency during assembly and decrease of inventory risk.
Gentle and smooth roll-up. Too quick and rough roll-up.
2 3
Mytec 01 Mytec 01
Blinds up to 2700 mm (106") width and Link type, double type, and four No crash at the top. A speed controller is A stop controller is optional. It is a perfect
3000 mm (118") height with 3.7 kg (8.2 lb) color variations are available for standard for the spring drive system, solution to setting the upper limit position.
screen weight are possible. Side Bracket type only. enabling the blind to go up at a constant
speed. With Set Bar Type, one person can install
The spring assist mechanism attached With Set Bar Type, one person can the blind by him or herself. Install the
makes for light operation even on large install the blind by him or herself. No irritation to stop the blind. brackets first and then snap the blind onto
windows. Install the brackets first and then The mechanism assures you to stop the the brackets.
snap the blind onto the brackets. blind anywhere at your discretion.
Chain choice can be brass,
stainless steel or plastic.
4 5
Mytec 01 Mytec 01
Blinds up to 2700 mm (106") width and Link type, double type, and four No crash at the top. A speed controller is A stop controller is optional. It is a perfect
3000 mm (118") height with 3.7 kg (8.2 lb) color variations are available for standard for the spring drive system, solution to setting the upper limit position.
screen weight are possible. Side Bracket type only. enabling the blind to go up at a constant
speed. With Set Bar Type, one person can install
The spring assist mechanism attached With Set Bar Type, one person can the blind by him or herself. Install the
makes for light operation even on large install the blind by him or herself. No irritation to stop the blind. brackets first and then snap the blind onto
windows. Install the brackets first and then The mechanism assures you to stop the the brackets.
snap the blind onto the brackets. blind anywhere at your discretion.
Chain choice can be brass,
stainless steel or plastic.
4 5
Mytec 01 Mytec 01
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System) Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)
Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type Mytec 01 Loop + Mytec 01 + Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Mytec 01 Loop + Top Box Mytec 01 + Top Box Top Box + Guide Wire Top Box +Guide Wire
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System) Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)
Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Mytec 01 Loop + Side Frame
Top Box + Side Frame Type Both Top Box and Side Frame are installed for the Double Type
Two screens of Mytec 01 Loop (Chain Drive
screen of Mytec 01 Loop (Chain Drive System). This
System) can be doubly installed.
type can fill a gap between screen and window case
Each screen can be operated by its own chain.
not only on either side but also at the top, reducing leak
Refer to page 24
of light. It also prevents the screen from flip-flop due to
wind from the outside, resulting in long-lasting use.
*Two sizes, S (Small) and M (Medium), are available for the Top Box.
*Cannot be used for Mytec 01 (Spring Drive System).
Refer to page 16
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System) Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)
Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Mytec 01 Loop + Top Box + Side Frame
6 7
Mytec 01 Mytec 01
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System) Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)
Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type Mytec 01 Loop + Mytec 01 + Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Mytec 01 Loop + Top Box Mytec 01 + Top Box Top Box + Guide Wire Top Box +Guide Wire
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System) Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)
Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Mytec 01 Loop + Side Frame
Top Box + Side Frame Type Both Top Box and Side Frame are installed for the Double Type
Two screens of Mytec 01 Loop (Chain Drive
screen of Mytec 01 Loop (Chain Drive System). This
System) can be doubly installed.
type can fill a gap between screen and window case
Each screen can be operated by its own chain.
not only on either side but also at the top, reducing leak
Refer to page 24
of light. It also prevents the screen from flip-flop due to
wind from the outside, resulting in long-lasting use.
*Two sizes, S (Small) and M (Medium), are available for the Top Box.
*Cannot be used for Mytec 01 (Spring Drive System).
Refer to page 16
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System) Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)
Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Mytec 01 Loop + Top Box + Side Frame
6 7
Mytec 01 Mytec 01
Bracket
11.8 mm (.46") (For Set Bar type)
Set Bar
(For Set Bar type)
11.8 mm (.46") Side Holder Side Holder
M: 47 mm (1.9") M: 47 mm (1.9") 20 mm (.79")
42 mm Chain Side Holder
S: 37 mm (1.5") S: 37 mm (1.5") (1.7") (For M size)
Chain Housing
Product
height (H)
10 mm
(.39")
Number of
Product
16.5 mm (.65") Product Width
Bracket
height (H) 5.6 mm (.22")
For Plastic Chain
1400 mm (55") or less 2
16 mm (.63") W–39 mm (1.5") 21 mm (.83")
4.1 mm 23.5 mm
(.16") (.93")
1410 mm (56") or more 3
4 mm (.16")
Specifications
Metal Ball Chain Plastic Ball Chain (Option)
Components and Materials Side Bracket Type (1 unit) Set Bar Type Side Bracket Type (1 unit) Set Bar Type
No. Components Material No. Components Material No. Components Material Maximum Screen Weight 3.7 kg (8.2 lb) 3.2 kg (7.1 lb)
Set Bar Aluminum SP Side Holder S/M/L Steel, Molded resin Plastic Ball Chain Molded resin 1.9 kg (4.2 lb) 2.3 kg (5.1 lb) 1.8 kg (4.0 lb) 2.2 kg (4.9 lb)
Product Weight
Roller Pipe Aluminum Chain Side Holder S/M/L Steel, Molded resin Metal Ball Chain Connector SUS or Brass (Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M—Ball Chain length is 3000 mm (118")
Spring Set Steel, Molded resin Side Holder Cover S/M/L Molded resin Plastic Ball Chain Joints Molded resin
Allowable
Product Width (W) 300 mm (11.8") to 2700 mm (106")
*
Non-balancer Set Steel, Molded resin Bracket Steel, Molded resin MT03 Weight Bar Aluminum Size Product Height (H) 100 mm (3.9") to 3000 mm (118")
Chain Housing Steel, Molded resin Metal Ball Chain SUS or Brass MT03 Weight Bar Cap Molded resin Ratio (W : H) 1 : 3 (limit)
: Use S/M for Side Bracket type, and use M/L for Set Bar type. Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
8 9
Mytec 01 Mytec 01
Bracket
11.8 mm (.46") (For Set Bar type)
Set Bar
(For Set Bar type)
11.8 mm (.46") Side Holder Side Holder
M: 47 mm (1.9") M: 47 mm (1.9") 20 mm (.79")
42 mm Chain Side Holder
S: 37 mm (1.5") S: 37 mm (1.5") (1.7") (For M size)
Chain Housing
Product
height (H)
10 mm
(.39")
Number of
Product
16.5 mm (.65") Product Width
Bracket
height (H) 5.6 mm (.22")
For Plastic Chain
1400 mm (55") or less 2
16 mm (.63") W–39 mm (1.5") 21 mm (.83")
4.1 mm 23.5 mm
(.16") (.93")
1410 mm (56") or more 3
4 mm (.16")
Specifications
Metal Ball Chain Plastic Ball Chain (Option)
Components and Materials Side Bracket Type (1 unit) Set Bar Type Side Bracket Type (1 unit) Set Bar Type
No. Components Material No. Components Material No. Components Material Maximum Screen Weight 3.7 kg (8.2 lb) 3.2 kg (7.1 lb)
Set Bar Aluminum SP Side Holder S/M/L Steel, Molded resin Plastic Ball Chain Molded resin 1.9 kg (4.2 lb) 2.3 kg (5.1 lb) 1.8 kg (4.0 lb) 2.2 kg (4.9 lb)
Product Weight
Roller Pipe Aluminum Chain Side Holder S/M/L Steel, Molded resin Metal Ball Chain Connector SUS or Brass (Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M—Ball Chain length is 3000 mm (118")
Spring Set Steel, Molded resin Side Holder Cover S/M/L Molded resin Plastic Ball Chain Joints Molded resin
Allowable
Product Width (W) 300 mm (11.8") to 2700 mm (106")
*
Non-balancer Set Steel, Molded resin Bracket Steel, Molded resin MT03 Weight Bar Aluminum Size Product Height (H) 100 mm (3.9") to 3000 mm (118")
Chain Housing Steel, Molded resin Metal Ball Chain SUS or Brass MT03 Weight Bar Cap Molded resin Ratio (W : H) 1 : 3 (limit)
: Use S/M for Side Bracket type, and use M/L for Set Bar type. Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
8 9
Mytec 01 Mytec 01
Option
Set Bar Type (with Stop Controller )
*
MT03 Weight Bar
MT03 Weight Bar Cap
4 mm (.16")
Specifications
Components and Materials
Side Bracket Type (1 unit) Set Bar Type
No. Components Material No. Components Material No. Components Material
Maximum Screen Weight 1.8 kg (3.0 lb)
Set Bar Aluminum MT03 Weight Bar Aluminum SC Side Holder S/M/L Steel, Molded resin
1.9 kg (4.2 lb) 2.3 kg (5.1 lb)
Roller Pipe Aluminum MT03 Weight Bar Cap Molded resin Stop Controller Molded resin Product Weight
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M
Spring Set Steel, Molded resin Clutch Molded resin MT03 Pull Ball Set Molded resin
SP Side Holder S/M/L Steel, Molded resin Speed Controller Molded resin MT03 Pull Grip Set Molded resin Allowable
Product Width (W) 300 mm (11.8") to 2000 mm (78.7")
*
Size Product Height (H) 100 mm (3.9") to 3000 mm (118")
Side Holder Cover S/M/L Molded resin Pipe End Molded resin MT03 Flat Grip Set Molded resin
Ratio (W : H) 1 : 3 (limit)
Bracket Steel, Molded resin End Side Holder S/M/L Steel, Molded resin
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
: Use S/M for Side Bracket type, and use M/L for Set Bar type. Maximum Screen Weights are different according to the screen material.
*Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
10 11
Mytec 01 Mytec 01
Option
Set Bar Type (with Stop Controller )
*
MT03 Weight Bar
MT03 Weight Bar Cap
4 mm (.16")
Specifications
Components and Materials
Side Bracket Type (1 unit) Set Bar Type
No. Components Material No. Components Material No. Components Material
Maximum Screen Weight 1.8 kg (3.0 lb)
Set Bar Aluminum MT03 Weight Bar Aluminum SC Side Holder S/M/L Steel, Molded resin
1.9 kg (4.2 lb) 2.3 kg (5.1 lb)
Roller Pipe Aluminum MT03 Weight Bar Cap Molded resin Stop Controller Molded resin Product Weight
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M
Spring Set Steel, Molded resin Clutch Molded resin MT03 Pull Ball Set Molded resin
SP Side Holder S/M/L Steel, Molded resin Speed Controller Molded resin MT03 Pull Grip Set Molded resin Allowable
Product Width (W) 300 mm (11.8") to 2000 mm (78.7")
*
Size Product Height (H) 100 mm (3.9") to 3000 mm (118")
Side Holder Cover S/M/L Molded resin Pipe End Molded resin MT03 Flat Grip Set Molded resin
Ratio (W : H) 1 : 3 (limit)
Bracket Steel, Molded resin End Side Holder S/M/L Steel, Molded resin
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
: Use S/M for Side Bracket type, and use M/L for Set Bar type. Maximum Screen Weights are different according to the screen material.
*Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
10 11
Mytec 01 Mytec 01
Structure Drawing—Mytec 01 Loop and Mytec 01 / Top Box Type (Option)71.2 mm (2.8")
57 mm (2.2")
5.4 mm
Product View 20 mm (.79") 5.4 mm
(.21")
(.21") Exploded View
*Refer to 31 page for the Installation Dimension. Ex. Mytec 01 Loop Top Box type
Top Box Cap Top Box Ceiling Bracket *
70.6 mm 89.8 mm
10 mm
Mytec 01 Loop *Direct attachment is possible. (.39")
(2.8") (3.5")
71.2 mm (2.8")
57 mm (2.2") 10 mm
(.39")
10 mm
(.39") SP Side Holder
Top Box Wall Bracket * * Selectable
5.4 mm
20 mm (.79") 5.4 mm (.21") for Top Box
(.21") Top Box Base
61.2 mm (2.4")
47 mm (1.9") 22.5 mm (.89")
Product width (W) 70.6 mmmm (.89") 89.8 mm
22.5
10 mm
(.39")
(2.8") (3.5")
3.8 mm Mytec 01 Loop / Mytec 01 unit
3.8 mm 10 mm (.15") 10 mm
(.15") (.39") (.39")
70.6 mm 89.8 mm
(2.8") (3.5") 61.2 mm (2.4") Chain Side Holder for Top Box
47 mm (1.9") 22.5 mm (.89")
Pile Tape *
Product width (W)
22.5 mm (.89") (Mytec 01: End Side Holder for Top Box
3.8 mm
3.8 mm (.15") or SC Side Holder for Top Box)
Product (.15")
height (H)
For Plastic Chain
70.6 mm 89.8 mm
(2.8") (3.5")
19.5 mm (.77") W–44 mm (1.7") 24.5 mm (.96")
70.6 mm 89.8 mm
10 mm (2.8") (3.5")
(.39") 10 mm 71.2 mm (2.8") 10 mm
57 mm (2.2")
(.39") (.39")
Brackets Weight Bar
5.4 mm 5.4 mm
20 mm (.79") (.21")
(.21")
61.2 mm (2.4")
47 mm (1.9") 22.5 mm (.89")
Product width (W) 70.6 mm 89.8 mm
10 mm
22.5 mm (.89")
(2.8") (3.5")
Ceiling Bracket Wall Bracket S Wall Bracket M
3.8 mm 58.8 mm (2.3") 73 mm (2.9")
(.39") 3.8 mm 10 mm (.15") 10 mm
(.15") (.39") (.39") 30.5 mm (1.2") 30.5 mm (1.2")
47.6 mm (1.9") 57 mm (2.2") 57 mm (2.2")
70.6 mm 89.8 mm
(2.8") (3.5") 61.2 mm (2.4") 8.6 mm
47 mm (1.9") 22.5 mm (.89") (.34")
Product width (W) 22.5 mm (.89") 45.4 mm 45.4 mm 45.4 mm 45.4 mm
3.8 mm 20 mm
3.8 mm (.15") (1.8") (1.8") (1.8") (1.8")
Product (.15") 4.2 mm (.79") Non wrapping Wrapping
height (H) type type
70.6 mm 89.8 mm
(.17")
(2.8") Top Box: S (3.5") Top Box: M 27.2 mm 27.2 mm
19.5 mm (.77") W–39 mm (1.5") 19.5 mm (.77")
(1.1") (1.1")
16 mm 16 mm
(.63") (.63")
Product
height (H) 10 mm (.39") 34.5 mm (1.4") 48.7 mm (1.9")
4 mm (.16")
Top Box: S Top Box: M
19.5 mm (.77") W–39 mm (1.5") 19.5 mm (.77")
Product Width Number of Bracket
Spring Set Steel, Molded resin Top Box Base Plate Aluminum Stop Controller Molded resin Maximum Screen Weight 3.7 kg (8.2 lb) 3.2 kg (7.1 lb) 1.8 kg (4.0 lb)
Non-balancer Set Steel, Molded resin Top Box Front Cover Aluminum MT03 Pull Ball Set Molded resin 5.2 kg (11.4 lb) 5.0 kg (11.0 lb) 5.2 kg (11.4 lb)
Product Weight (Width: 2000 mm/79" without screen) Ex.: Spring Set F, (Width: 2000 mm/79" without screen)
Chain Housing Steel, Molded resin SP Side Holder for Top Box S/M Steel, Molded resin MT03 Pull Grip Set Molded resin
Side Holder M—Ball Chain length is 3000 mm (118"), Top Box M Ex.: Spring Set F, Side Holder M, Top Box M
Metal Ball Chain SUS or Brass Chain Side Holder for Top Box S/M Steel, Molded resin MT03 Flat Grip Set Molded resin
300 mm (11.8") to 2700 mm (106")
** 300 mm (11.8") to 2000 mm (78.7")
1 2
Product Width (W)
Plastic Ball Chain Molded resin Top Box Cap (L/R) S/M Molded resin End Side Holder for Top Box S/M Molded resin Allowable
Size Product Height (H) 100 mm (3.9") to 3000 mm (118")
Metal Ball Chain Connector SUS or Brass Top Box Ceiling Bracket SUS SC Side Holder for Top Box S/M Molded resin
Ratio (W : H) 1 : 3 (limit)
Plastic Ball Chain Joints Molded resin Clutch Molded resin Top Box Wall Bracket SUS, Steel
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
MT03 Weight Bar Aluminum Speed Controller Molded resin
Maximum Screen Weights are different according to the screen material.
*
1 Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
*
2 Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
12 13
Mytec 01 Mytec 01
Structure Drawing—Mytec 01 Loop and Mytec 01 / Top Box Type (Option)71.2 mm (2.8")
57 mm (2.2")
5.4 mm
Product View 20 mm (.79") 5.4 mm
(.21")
(.21") Exploded View
*Refer to 31 page for the Installation Dimension. Ex. Mytec 01 Loop Top Box type
Top Box Cap Top Box Ceiling Bracket *
70.6 mm 89.8 mm
10 mm
Mytec 01 Loop *Direct attachment is possible. (.39")
(2.8") (3.5")
71.2 mm (2.8")
57 mm (2.2") 10 mm
(.39")
10 mm
(.39") SP Side Holder
Top Box Wall Bracket * * Selectable
5.4 mm
20 mm (.79") 5.4 mm (.21") for Top Box
(.21") Top Box Base
61.2 mm (2.4")
47 mm (1.9") 22.5 mm (.89")
Product width (W) 70.6 mmmm (.89") 89.8 mm
22.5
10 mm
(.39")
(2.8") (3.5")
3.8 mm Mytec 01 Loop / Mytec 01 unit
3.8 mm 10 mm (.15") 10 mm
(.15") (.39") (.39")
70.6 mm 89.8 mm
(2.8") (3.5") 61.2 mm (2.4") Chain Side Holder for Top Box
47 mm (1.9") 22.5 mm (.89")
Pile Tape *
Product width (W)
22.5 mm (.89") (Mytec 01: End Side Holder for Top Box
3.8 mm
3.8 mm (.15") or SC Side Holder for Top Box)
Product (.15")
height (H)
For Plastic Chain
70.6 mm 89.8 mm
(2.8") (3.5")
19.5 mm (.77") W–44 mm (1.7") 24.5 mm (.96")
70.6 mm 89.8 mm
10 mm (2.8") (3.5")
(.39") 10 mm 71.2 mm (2.8") 10 mm
57 mm (2.2")
(.39") (.39")
Brackets Weight Bar
5.4 mm 5.4 mm
20 mm (.79") (.21")
(.21")
61.2 mm (2.4")
47 mm (1.9") 22.5 mm (.89")
Product width (W) 70.6 mm 89.8 mm
10 mm
22.5 mm (.89")
(2.8") (3.5")
Ceiling Bracket Wall Bracket S Wall Bracket M
3.8 mm 58.8 mm (2.3") 73 mm (2.9")
(.39") 3.8 mm 10 mm (.15") 10 mm
(.15") (.39") (.39") 30.5 mm (1.2") 30.5 mm (1.2")
47.6 mm (1.9") 57 mm (2.2") 57 mm (2.2")
70.6 mm 89.8 mm
(2.8") (3.5") 61.2 mm (2.4") 8.6 mm
47 mm (1.9") 22.5 mm (.89") (.34")
Product width (W) 22.5 mm (.89") 45.4 mm 45.4 mm 45.4 mm 45.4 mm
3.8 mm 20 mm
3.8 mm (.15") (1.8") (1.8") (1.8") (1.8")
Product (.15") 4.2 mm (.79") Non wrapping Wrapping
height (H) type type
70.6 mm 89.8 mm
(.17")
(2.8") Top Box: S (3.5") Top Box: M 27.2 mm 27.2 mm
19.5 mm (.77") W–39 mm (1.5") 19.5 mm (.77")
(1.1") (1.1")
16 mm 16 mm
(.63") (.63")
Product
height (H) 10 mm (.39") 34.5 mm (1.4") 48.7 mm (1.9")
4 mm (.16")
Top Box: S Top Box: M
19.5 mm (.77") W–39 mm (1.5") 19.5 mm (.77")
Product Width Number of Bracket
Spring Set Steel, Molded resin Top Box Base Plate Aluminum Stop Controller Molded resin Maximum Screen Weight 3.7 kg (8.2 lb) 3.2 kg (7.1 lb) 1.8 kg (4.0 lb)
Non-balancer Set Steel, Molded resin Top Box Front Cover Aluminum MT03 Pull Ball Set Molded resin 5.2 kg (11.4 lb) 5.0 kg (11.0 lb) 5.2 kg (11.4 lb)
Product Weight (Width: 2000 mm/79" without screen) Ex.: Spring Set F, (Width: 2000 mm/79" without screen)
Chain Housing Steel, Molded resin SP Side Holder for Top Box S/M Steel, Molded resin MT03 Pull Grip Set Molded resin
Side Holder M—Ball Chain length is 3000 mm (118"), Top Box M Ex.: Spring Set F, Side Holder M, Top Box M
Metal Ball Chain SUS or Brass Chain Side Holder for Top Box S/M Steel, Molded resin MT03 Flat Grip Set Molded resin
300 mm (11.8") to 2700 mm (106")
** 300 mm (11.8") to 2000 mm (78.7")
1 2
Product Width (W)
Plastic Ball Chain Molded resin Top Box Cap (L/R) S/M Molded resin End Side Holder for Top Box S/M Molded resin Allowable
Size Product Height (H) 100 mm (3.9") to 3000 mm (118")
Metal Ball Chain Connector SUS or Brass Top Box Ceiling Bracket SUS SC Side Holder for Top Box S/M Molded resin
Ratio (W : H) 1 : 3 (limit)
Plastic Ball Chain Joints Molded resin Clutch Molded resin Top Box Wall Bracket SUS, Steel
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
MT03 Weight Bar Aluminum Speed Controller Molded resin
Maximum Screen Weights are different according to the screen material.
*
1 Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
*
2 Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
12 13
Mytec 01 Mytec 01
22 mm Side Holder
Side Holder Cover *
45 mm (1.8") (.87")
M: 47 mm (1.9")
Product width (W) With Side Cover: +2 mm (.08") S: 37 mm (1.5") 10 mm Set Bar
50 mm (2.0") 50 mm (2.0") (.39")
31.5 mm (1.24") (For Set Bar type)
Side Holder
M: 47 mm (1.9")
S: 37 mm (1.5") Side Holder 20 mm Side Holder
M: 90 mm (3.5") (.79") M: 90 mm (3.5") Side Frame Cover
S: 70 mm (2.8") S: 70 mm (2.8")
Pile Tape *
Side Frame Base
Mytec 01 Loop / Set Bar Type *Ceiling attachment only. Side Frame Base (Metal or Plastic)
Ball Chain
50 mm (2.0") 48.5 mm (1.9") (Metal or Plastic) Side Frame Cap
Pile Tape
45 mm Side Holder 42 mm Side Frame Cap
(1.8") L: 58 mm (2.3") (1.7")
Product width (W) With Side Cover: +2 mm (.08")
Weight Bar
M: 50 mm (2.0")
50 mm (2.0") 50 mm (2.0") for Side Frame
Weight Bar Cap
for Side Frame
Side Holder Weight Bar Cap
L: 58 mm (2.3") for Side Frame
Side Holder Side Holder
M: 50 mm (2.0") Pile Tape *
L: 100 mm (3.9") L: 100 mm (3.9")
S: 80 mm (3.1") S: 80 mm (3.1")
Bracket
25.5 mm 20.5 mm 5.1 mm 5.1 mm *Set Bar type only.
(1.0") (.81") (.20") (.20") 46.5 mm (1.8")
W–46 mm (1.8") Product 4.5 mm
height (H)
43 mm (1.7")
(.18")
25.5 mm 25.5 mm 10 mm
(1.0") For Plastic Chain (1.0") (.39")
Number of
Product Width
5.1 mm 5.1 mm Bracket
16.5 mm (.65")
(.20") (.20")
5.6 mm (.22")
: Use S/M for Side Bracket type, and use M/L for Set Bar type. Ratio (W : H) 1 : 3 (limit)
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
14 15
Mytec 01 Mytec 01
22 mm Side Holder
Side Holder Cover *
45 mm (1.8") (.87")
M: 47 mm (1.9")
Product width (W) With Side Cover: +2 mm (.08") S: 37 mm (1.5") 10 mm Set Bar
50 mm (2.0") 50 mm (2.0") (.39")
31.5 mm (1.24") (For Set Bar type)
Side Holder
M: 47 mm (1.9")
S: 37 mm (1.5") Side Holder 20 mm Side Holder
M: 90 mm (3.5") (.79") M: 90 mm (3.5") Side Frame Cover
S: 70 mm (2.8") S: 70 mm (2.8")
Pile Tape *
Side Frame Base
Mytec 01 Loop / Set Bar Type *Ceiling attachment only. Side Frame Base (Metal or Plastic)
Ball Chain
50 mm (2.0") 48.5 mm (1.9") (Metal or Plastic) Side Frame Cap
Pile Tape
45 mm Side Holder 42 mm Side Frame Cap
(1.8") L: 58 mm (2.3") (1.7")
Product width (W) With Side Cover: +2 mm (.08")
Weight Bar
M: 50 mm (2.0")
50 mm (2.0") 50 mm (2.0") for Side Frame
Weight Bar Cap
for Side Frame
Side Holder Weight Bar Cap
L: 58 mm (2.3") for Side Frame
Side Holder Side Holder
M: 50 mm (2.0") Pile Tape *
L: 100 mm (3.9") L: 100 mm (3.9")
S: 80 mm (3.1") S: 80 mm (3.1")
Bracket
25.5 mm 20.5 mm 5.1 mm 5.1 mm *Set Bar type only.
(1.0") (.81") (.20") (.20") 46.5 mm (1.8")
W–46 mm (1.8") Product 4.5 mm
height (H)
43 mm (1.7")
(.18")
25.5 mm 25.5 mm 10 mm
(1.0") For Plastic Chain (1.0") (.39")
Number of
Product Width
5.1 mm 5.1 mm Bracket
16.5 mm (.65")
(.20") (.20")
5.6 mm (.22")
: Use S/M for Side Bracket type, and use M/L for Set Bar type. Ratio (W : H) 1 : 3 (limit)
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
14 15
Mytec 01 Mytec 01
Top Box Cap (Mytec 01: End Side Holder for Top Box)
Pile Tape *
70.6 mm 89.8 mm
(2.8") (3.5") Side Frame Cover
Chain Housing
5.1 mm
(.20") 5.1 mm
(.20")
Pile Tape *
For Plastic Chain 5.1 mm
5.1 mm
(.20")
(.20") Side Frame Cover Ball Chain
45 mm (1.8") 45 mm (1.8") Top Box: S Top Box: M (Metal or Plastic)
Pile Tape *
Brackets
Components and Materials
Ceiling Bracket Wall Bracket S Wall Bracket M
58.8 mm (2.3") 73 mm (2.9") Product Width Number of Bracket
No. Components Material No. Components Material No. Components Material
47.6 mm (1.9") 30.5 mm (1.2") 57 mm (2.2") 30.5 mm (1.2") 57 mm (2.2")
Roller Pipe Aluminum Plastic Ball Chain Joints Molded resin Top Box Ceiling Bracket SUS 1400 mm (55") or less 2
8.6 mm
(.34")
Spring Set Steel, Molded resin Top Box Base Plate Aluminum Side Frame Base/Cover Aluminum 45.4 mm 45.4 mm 45.4 mm 45.4 mm
20 mm 1410 mm (56") or more 3
(1.8") (1.8") (1.8") (1.8")
Non-Balancer Set Steel, Molded resin Top Box Front Cover Aluminum Side Frame Cap Molded resin 4.2 mm (.79")
(.17")
Metal Ball Chain SUS or Brass SP Side Holder for Top Box S/M Steel, Molded resin Weight Bar for Side Frame Aluminum
27.2 mm 27.2 mm
Plastic Ball Chain Molded resin Chain Side Holder for Top Box S/M Steel, Molded resin Weight Bar Cap for Side Frame Molded resin (1.1") (1.1")
16 mm 16 mm
(.63") (.63")
Metal Ball Chain Connector SUS or Brass Top Box Cap (L/R) S/M Molded resin Side Frame Holder Molded resin 10 mm (.39") 34.5 mm (1.4") 48.7 mm (1.9")
Specifications
Allowable
Product Width (W) 300 mm (11.8") to 2700 mm (106")
*
Size Product Height (H) 100 mm (3.9") to 3000 mm (118")
Ratio (W : H) 1 : 3 (limit)
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
16 17
Mytec 01 Mytec 01
Top Box Cap (Mytec 01: End Side Holder for Top Box)
Pile Tape *
70.6 mm 89.8 mm
(2.8") (3.5") Side Frame Cover
Chain Housing
5.1 mm
(.20") 5.1 mm
(.20")
Pile Tape *
For Plastic Chain 5.1 mm
5.1 mm
(.20")
(.20") Side Frame Cover Ball Chain
45 mm (1.8") 45 mm (1.8") Top Box: S Top Box: M (Metal or Plastic)
Pile Tape *
Brackets
Components and Materials
Ceiling Bracket Wall Bracket S Wall Bracket M
58.8 mm (2.3") 73 mm (2.9") Product Width Number of Bracket
No. Components Material No. Components Material No. Components Material
47.6 mm (1.9") 30.5 mm (1.2") 57 mm (2.2") 30.5 mm (1.2") 57 mm (2.2")
Roller Pipe Aluminum Plastic Ball Chain Joints Molded resin Top Box Ceiling Bracket SUS 1400 mm (55") or less 2
8.6 mm
(.34")
Spring Set Steel, Molded resin Top Box Base Plate Aluminum Side Frame Base/Cover Aluminum 45.4 mm 45.4 mm 45.4 mm 45.4 mm
20 mm 1410 mm (56") or more 3
(1.8") (1.8") (1.8") (1.8")
Non-Balancer Set Steel, Molded resin Top Box Front Cover Aluminum Side Frame Cap Molded resin 4.2 mm (.79")
(.17")
Metal Ball Chain SUS or Brass SP Side Holder for Top Box S/M Steel, Molded resin Weight Bar for Side Frame Aluminum
27.2 mm 27.2 mm
Plastic Ball Chain Molded resin Chain Side Holder for Top Box S/M Steel, Molded resin Weight Bar Cap for Side Frame Molded resin (1.1") (1.1")
16 mm 16 mm
(.63") (.63")
Metal Ball Chain Connector SUS or Brass Top Box Cap (L/R) S/M Molded resin Side Frame Holder Molded resin 10 mm (.39") 34.5 mm (1.4") 48.7 mm (1.9")
Specifications
Allowable
Product Width (W) 300 mm (11.8") to 2700 mm (106")
*
Size Product Height (H) 100 mm (3.9") to 3000 mm (118")
Ratio (W : H) 1 : 3 (limit)
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
16 17
Mytec 01 Mytec 01
Set Bar
42 mm (1.7") 11.8 mm (.46") 20 mm (.79")
Side Holder (For M size) (For Set Bar type)
M: 47 mm (1.9") 42 mm 10 mm
Side Holder S: 37 mm (1.5") (1.7") (.39")
45 mm Side Holder Side Holder SP Side Holder
M: 47 mm (1.9") Wire Stop
8.4 mm (.33") (1.8") M: 47 mm (1.9") 22 mm M: 47 mm (1.9")
Product width (W) With Side Cover: +2 mm (.08") S: 37 mm (1.5") (.87")
S: 37 mm (1.5") S: 37 mm (1.5")
31.5 mm (1.24") 20 mm (.79")
(For M size)
10.9 mm (.43") 10 mm
(.39")
22 mm
(.87") Side Holder Cover *
13 mm 25 mm
(.51") (.98")
Side Bracket Type Ball Chain Wire (Steel or Nylon)
(Metal or Plastic)
Mytec 01 For Set Bar type
11.8 mm (.46")
13 mm 25 mm 4.1 mm 23.5 mm
(.51") (.98") (.16") (.93")
1410 mm (56") or more 3
Side Bracket Type
Specifications
Components and Materials
Mytec 01 Loop (Metal Ball Chain) Mytec 01 Loop (Plastic Ball Chain) Mytec 01 (Spring Drive System)
No. Components Material No. Components Material No. Components Material
Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Set Bar Aluminum Plastic Ball Chain Molded resin Clutch Molded resin
Maximum Screen Weight 3.7 kg (8.2 lb) 3.2 kg (7.1 lb) 1.8 kg (4.0 lb)
Roller Pipe Aluminum Metal Ball Chain Connector SUS or Brass Speed Controller Molded resin
1.9 kg (4.2 lb) 2.3 kg (5.1 lb) 1.8 kg (4.0 lb) 2.2 kg (4.9 lb) 1.9 kg (4.2 lb) 2.3 kg (5.1 lb)
Spring Set Steel, Molded resin Plastic Ball Chain Joints Molded resin End Side Holder S/M/L Steel, Molded resin Product Weight
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, (Width: 2000 mm/79" without screen)
Chain Housing Steel, Molded resin MT03 Weight Bar Aluminum MT03 Pull Ball Set Molded resin Side Holder M—Ball Chain length is 3000 mm (118") Ex.: Spring Set F, Side Holder M,
SP Side Holder S/M/L Steel, Molded resin Wire Stop Molded resin MT03 Pull Grip Set Molded resin Product Width (W) 300 mm (11.8") to 2700 mm (106")
** 300 mm (11.8") to 2000 mm (78.7")
1 2
Allowable
Chain Side Holder S/M/L Steel, Molded resin Wire Nylon or Steel MT03 Flat Grip Set Molded resin Product Height (H) 100 mm (3.9") to 3000 mm (118") 100 mm (3.9") to 3000 mm (118")
Size
Side Holder Cover S/M/L Molded resin Wire Base Molded resin Pipe End Molded resin Ratio (W : H) 1 : 3 (limit) 1 : 3 (limit)
Metal Ball Chain SUS or Brass Weight Bar Cap for Guide Wire Molded resin Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Maximum Screen Weights are different according to the screen material.
: Use S/M for Side Bracket type, and use M/L for Set Bar type.
*
1 Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
*
2 Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
18 19
Mytec 01 Mytec 01
Set Bar
42 mm (1.7") 11.8 mm (.46") 20 mm (.79")
Side Holder (For M size) (For Set Bar type)
M: 47 mm (1.9") 42 mm 10 mm
Side Holder S: 37 mm (1.5") (1.7") (.39")
45 mm Side Holder Side Holder SP Side Holder
M: 47 mm (1.9") Wire Stop
8.4 mm (.33") (1.8") M: 47 mm (1.9") 22 mm M: 47 mm (1.9")
Product width (W) With Side Cover: +2 mm (.08") S: 37 mm (1.5") (.87")
S: 37 mm (1.5") S: 37 mm (1.5")
31.5 mm (1.24") 20 mm (.79")
(For M size)
10.9 mm (.43") 10 mm
(.39")
22 mm
(.87") Side Holder Cover *
13 mm 25 mm
(.51") (.98")
Side Bracket Type Ball Chain Wire (Steel or Nylon)
(Metal or Plastic)
Mytec 01 For Set Bar type
11.8 mm (.46")
13 mm 25 mm 4.1 mm 23.5 mm
(.51") (.98") (.16") (.93")
1410 mm (56") or more 3
Side Bracket Type
Specifications
Components and Materials
Mytec 01 Loop (Metal Ball Chain) Mytec 01 Loop (Plastic Ball Chain) Mytec 01 (Spring Drive System)
No. Components Material No. Components Material No. Components Material
Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Set Bar Aluminum Plastic Ball Chain Molded resin Clutch Molded resin
Maximum Screen Weight 3.7 kg (8.2 lb) 3.2 kg (7.1 lb) 1.8 kg (4.0 lb)
Roller Pipe Aluminum Metal Ball Chain Connector SUS or Brass Speed Controller Molded resin
1.9 kg (4.2 lb) 2.3 kg (5.1 lb) 1.8 kg (4.0 lb) 2.2 kg (4.9 lb) 1.9 kg (4.2 lb) 2.3 kg (5.1 lb)
Spring Set Steel, Molded resin Plastic Ball Chain Joints Molded resin End Side Holder S/M/L Steel, Molded resin Product Weight
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, (Width: 2000 mm/79" without screen)
Chain Housing Steel, Molded resin MT03 Weight Bar Aluminum MT03 Pull Ball Set Molded resin Side Holder M—Ball Chain length is 3000 mm (118") Ex.: Spring Set F, Side Holder M,
SP Side Holder S/M/L Steel, Molded resin Wire Stop Molded resin MT03 Pull Grip Set Molded resin Product Width (W) 300 mm (11.8") to 2700 mm (106")
** 300 mm (11.8") to 2000 mm (78.7")
1 2
Allowable
Chain Side Holder S/M/L Steel, Molded resin Wire Nylon or Steel MT03 Flat Grip Set Molded resin Product Height (H) 100 mm (3.9") to 3000 mm (118") 100 mm (3.9") to 3000 mm (118")
Size
Side Holder Cover S/M/L Molded resin Wire Base Molded resin Pipe End Molded resin Ratio (W : H) 1 : 3 (limit) 1 : 3 (limit)
Metal Ball Chain SUS or Brass Weight Bar Cap for Guide Wire Molded resin Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Maximum Screen Weights are different according to the screen material.
: Use S/M for Side Bracket type, and use M/L for Set Bar type.
*
1 Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
*
2 Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
18 19
71.2 mm (2.8")
57 mm (2.2")
Mytec 01 Mytec 01
20 mm (.79") 5.4 mm
5.4 mm (.21")
(.21")
10 mm
(.39") 70.6 mm 89.8 mm
(2.8") (3.5")
Structure Drawing—Mytec 01 Loop / Top Box + Guide Wire (Option) 10 mm
(.39")
10 mm
(.39")
Product View
8.4 mm (.33") 8.4 mm (.33") 47 mm (1.9")to 31 page for
61.2 mm (2.4") Exploded View
10.9 mm Product width (W) With Side Cover: +2 mm (.08") *Refer the
22.5 Installation
mm (.89") Dimension. Ex. Mytec 01 Loop Side Bracket type
(.43") 22.5 mm (.89") SP Side Holder for Top Box Top Box Ceiling Bracket *
10.9 mm (.43") 3.8 mm Top Box Wall Bracket *
Mytec 01 Loop 3.8 mm (.15") 71.2 mm (2.8")
(.15") 57 mm (2.2") Wire Stop * Selectable
20 mm (.79") 5.4 mm
70.6
5.4 mmmm 89.8
(.21")mm Top Box Base
(2.8")
(.21") (3.5") Mytec 01 Loop / Mytec 01 unit
10 mm
(.39") 70.6 mm 89.8 mm
(2.8") (3.5") Top Box Cap
Product 10 mm 10 mm
height (H) (.39") (.39") Pile Tape * Chain Side Holder for Top Box
For Plastic Chain
(Mytec 01: End Side Holder for Top Box
18 mm (.71") W–46 mm (1.8") 24.5 mm (.96") 61.2 mm (2.4") Wire Stop or SC Side Holder for Top Box)
8.4 mm (.33") 8.4 mm (.33") 47 mm (1.9") 22.5 mm (.89")
10.9 mm 9.9 mm (.39") Product width (W) With Side Cover: +2 mm (.08") Top Box Cap
(.43") 22.5 mm (.89") 25 mm
10.9 mm (.43") (.98") 3.8 mm
3.8 mm (.15")
(.15")
15.3 mm (.60") Top Box: S Top Box: M Top Box Cover
70.6 mm 89.8 mm
(2.8") (3.5")
25 mm
(.98")
Chain Housing
Product
height (H)
For Plastic Chain
Ball Chain Connector
18 mm (.71") W–46 mm (1.8") 24.5 mm (.96")
(Metal or Plastic)
9.9 mm (.39")
25 mm
(.98") Wire (Steel or Nylon)
61.2 mm (2.4")
10.9 mm
8.4 mm (.33")
Product width (W)
8.4 mm (.33")
22.5 mm (.89")
47 mm (1.9") 22.5 mm (.89") Brackets Weight Bar
(.43") 3.8 mm
10.9 mm (.43")
3.8 mm (.15") 71.2 mm (2.8") Ceiling Bracket Wall Bracket S Wall Bracket M
(.15") 57 mm (2.2") 58.8 mm (2.3") 73 mm (2.9")
20 mm (.79") 5.4 mmmm 30.5 mm (1.2") 30.5 mm (1.2")
70.6
5.4 mmmm 89.8 47.6 mm (1.9") 57 mm (2.2") 57 mm (2.2")
(2.8") (.21")
(3.5")
(.21")
8.6 mm
10 mm (.34")
70.6 mm 89.8 mm 45.4 mm 45.4 mm 45.4 mm 45.4 mm
(.39") (2.8") (3.5") 20 mm
10 mm 10 mm (1.8") (1.8") (1.8") (1.8")
Product
(.39") (.39") 4.2 mm (.79")
height (H)
(.17")
Non wrapping Wrapping
type type
Top Box: S Top
61.2Box: M
mm (2.4")
27.2 mm 27.2 mm
8.421.5
mm mm (.85")
(.33") W–43 mm (1.7") 21.5
8.4 mmmm (.85")
(.33") 47 mm (1.9") 22.5 mm (.89") 16 mm
(1.1")
16 mm
(1.1")
10.9 mm Product width (W) 22.5 mm (.89")
(.43") 25 mm (.63") (.63")
10.9 mm (.43") (.98") 3.8 mm
3.8 mm (.15") 10 mm (.39") 34.5 mm (1.4") 48.7 mm (1.9")
(.15")
15.3 mm (.60")
70.6 mm 89.8 mm
(2.8") (3.5") Product Width Number of Bracket
25 mm
(.98")
1400 mm (55") or less 2
Option Product
height (H)
(with Stop Controller
*
2)
1410 mm (56") or more 3
Top Box: S Top Box: M
21.5 mm (.85") W–43 mm (1.7") 21.5 mm (.85")
Components and Materials 25 mm
(.98") Specifications
No. Components Material No. Components Material No. Components Material
15.3 mm (.60") Metal Ball Chain Plastic Ball Chain Mytec 01 (Spring Drive System)
Roller Pipe Aluminum SP Side Holder for Top Box S/M Steel, Molded resin Pipe End Molded resin
25 mm Maximum Screen Weight 3.7 kg (8.2 lb) 3.2 kg (7.1 lb) 1.8 kg (4.0 lb)
Spring Set Steel, Molded resin Chain Side Holder for Top Box S/M Steel, Molded resin (.98") Stop Controller Molded resin
5.2 kg (11.4 lb) 5.0 kg (11.0 lb) 5.2 kg (11.4 lb)
Metal Ball Chain SUS or Brass Option Top Box Cap (L/R) S/M Molded resin MT03 Pull Ball Set Molded resin
Product Weight
*
(with Stop (Width: 2000 mm/79" without screen) Ex.: Spring Set F, (Width: 2000 mm/79" without screen)
TopController
2)
Plastic Ball Chain Molded resin Box Ceiling Bracket SUS MT03 Pull Grip Set Molded resin Side Holder M—Ball Chain length is 3000 mm (118"), Top Box M Ex.: Spring Set F, Side Holder M, Top Box M
Metal Ball Chain Connector SUS or Brass Wire Nylon or Steel MT03 Flat Grip Set Molded resin
300 mm (11.8") to 2700 mm (106")
** 300 mm (11.8") to 2000 mm (78.7")
1 2
Product Width (W)
Plastic Ball Chain Joints Molded resin Weight Bar Cap for Guide Wire Molded resin SC Side Holder for Top Box S/M Molded resin Allowable
Product Height (H) 100 mm (3.9") to 3000 mm (118")
Size
MT03 Weight Bar Aluminum Clutch Molded resin End Side Holder for Top Box S/M Molded resin Ratio (W : H) 1 : 3 (limit)
Top Box Base Plate Aluminum Speed Controller Molded resin Wire Base Molded resin
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Top Box Front Cover Aluminum Maximum Screen Weights are different according to the screen material.
*
1 Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
*
2 Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
20 21
71.2 mm (2.8")
57 mm (2.2")
Mytec 01 Mytec 01
20 mm (.79") 5.4 mm
5.4 mm (.21")
(.21")
10 mm
(.39") 70.6 mm 89.8 mm
(2.8") (3.5")
Structure Drawing—Mytec 01 Loop / Top Box + Guide Wire (Option) 10 mm
(.39")
10 mm
(.39")
Product View
8.4 mm (.33") 8.4 mm (.33") 47 mm (1.9")to 31 page for
61.2 mm (2.4") Exploded View
10.9 mm Product width (W) With Side Cover: +2 mm (.08") *Refer the
22.5 Installation
mm (.89") Dimension. Ex. Mytec 01 Loop Side Bracket type
(.43") 22.5 mm (.89") SP Side Holder for Top Box Top Box Ceiling Bracket *
10.9 mm (.43") 3.8 mm Top Box Wall Bracket *
Mytec 01 Loop 3.8 mm (.15") 71.2 mm (2.8")
(.15") 57 mm (2.2") Wire Stop * Selectable
20 mm (.79") 5.4 mm
70.6
5.4 mmmm 89.8
(.21")mm Top Box Base
(2.8")
(.21") (3.5") Mytec 01 Loop / Mytec 01 unit
10 mm
(.39") 70.6 mm 89.8 mm
(2.8") (3.5") Top Box Cap
Product 10 mm 10 mm
height (H) (.39") (.39") Pile Tape * Chain Side Holder for Top Box
For Plastic Chain
(Mytec 01: End Side Holder for Top Box
18 mm (.71") W–46 mm (1.8") 24.5 mm (.96") 61.2 mm (2.4") Wire Stop or SC Side Holder for Top Box)
8.4 mm (.33") 8.4 mm (.33") 47 mm (1.9") 22.5 mm (.89")
10.9 mm 9.9 mm (.39") Product width (W) With Side Cover: +2 mm (.08") Top Box Cap
(.43") 22.5 mm (.89") 25 mm
10.9 mm (.43") (.98") 3.8 mm
3.8 mm (.15")
(.15")
15.3 mm (.60") Top Box: S Top Box: M Top Box Cover
70.6 mm 89.8 mm
(2.8") (3.5")
25 mm
(.98")
Chain Housing
Product
height (H)
For Plastic Chain
Ball Chain Connector
18 mm (.71") W–46 mm (1.8") 24.5 mm (.96")
(Metal or Plastic)
9.9 mm (.39")
25 mm
(.98") Wire (Steel or Nylon)
61.2 mm (2.4")
10.9 mm
8.4 mm (.33")
Product width (W)
8.4 mm (.33")
22.5 mm (.89")
47 mm (1.9") 22.5 mm (.89") Brackets Weight Bar
(.43") 3.8 mm
10.9 mm (.43")
3.8 mm (.15") 71.2 mm (2.8") Ceiling Bracket Wall Bracket S Wall Bracket M
(.15") 57 mm (2.2") 58.8 mm (2.3") 73 mm (2.9")
20 mm (.79") 5.4 mmmm 30.5 mm (1.2") 30.5 mm (1.2")
70.6
5.4 mmmm 89.8 47.6 mm (1.9") 57 mm (2.2") 57 mm (2.2")
(2.8") (.21")
(3.5")
(.21")
8.6 mm
10 mm (.34")
70.6 mm 89.8 mm 45.4 mm 45.4 mm 45.4 mm 45.4 mm
(.39") (2.8") (3.5") 20 mm
10 mm 10 mm (1.8") (1.8") (1.8") (1.8")
Product
(.39") (.39") 4.2 mm (.79")
height (H)
(.17")
Non wrapping Wrapping
type type
Top Box: S Top
61.2Box: M
mm (2.4")
27.2 mm 27.2 mm
8.421.5
mm mm (.85")
(.33") W–43 mm (1.7") 21.5
8.4 mmmm (.85")
(.33") 47 mm (1.9") 22.5 mm (.89") 16 mm
(1.1")
16 mm
(1.1")
10.9 mm Product width (W) 22.5 mm (.89")
(.43") 25 mm (.63") (.63")
10.9 mm (.43") (.98") 3.8 mm
3.8 mm (.15") 10 mm (.39") 34.5 mm (1.4") 48.7 mm (1.9")
(.15")
15.3 mm (.60")
70.6 mm 89.8 mm
(2.8") (3.5") Product Width Number of Bracket
25 mm
(.98")
1400 mm (55") or less 2
Option Product
height (H)
(with Stop Controller
*
2)
1410 mm (56") or more 3
Top Box: S Top Box: M
21.5 mm (.85") W–43 mm (1.7") 21.5 mm (.85")
Components and Materials 25 mm
(.98") Specifications
No. Components Material No. Components Material No. Components Material
15.3 mm (.60") Metal Ball Chain Plastic Ball Chain Mytec 01 (Spring Drive System)
Roller Pipe Aluminum SP Side Holder for Top Box S/M Steel, Molded resin Pipe End Molded resin
25 mm Maximum Screen Weight 3.7 kg (8.2 lb) 3.2 kg (7.1 lb) 1.8 kg (4.0 lb)
Spring Set Steel, Molded resin Chain Side Holder for Top Box S/M Steel, Molded resin (.98") Stop Controller Molded resin
5.2 kg (11.4 lb) 5.0 kg (11.0 lb) 5.2 kg (11.4 lb)
Metal Ball Chain SUS or Brass Option Top Box Cap (L/R) S/M Molded resin MT03 Pull Ball Set Molded resin
Product Weight
*
(with Stop (Width: 2000 mm/79" without screen) Ex.: Spring Set F, (Width: 2000 mm/79" without screen)
TopController
2)
Plastic Ball Chain Molded resin Box Ceiling Bracket SUS MT03 Pull Grip Set Molded resin Side Holder M—Ball Chain length is 3000 mm (118"), Top Box M Ex.: Spring Set F, Side Holder M, Top Box M
Metal Ball Chain Connector SUS or Brass Wire Nylon or Steel MT03 Flat Grip Set Molded resin
300 mm (11.8") to 2700 mm (106")
** 300 mm (11.8") to 2000 mm (78.7")
1 2
Product Width (W)
Plastic Ball Chain Joints Molded resin Weight Bar Cap for Guide Wire Molded resin SC Side Holder for Top Box S/M Molded resin Allowable
Product Height (H) 100 mm (3.9") to 3000 mm (118")
Size
MT03 Weight Bar Aluminum Clutch Molded resin End Side Holder for Top Box S/M Molded resin Ratio (W : H) 1 : 3 (limit)
Top Box Base Plate Aluminum Speed Controller Molded resin Wire Base Molded resin
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Top Box Front Cover Aluminum Maximum Screen Weights are different according to the screen material.
*
1 Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
*
2 Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
20 21
Mytec 01 Mytec 01
Side Holder
Cover *
4 mm (.16") 4 mm (.16") Link Joint Pipe End
Roller Pipe with
Chain Housing
26 mm (1.0") 26 mm (1.0")
*Metal Ball Chain only.
Product
16 mm (.63") 21 mm (.83") height (H)
Weight Bar
Specifications
Spring Set Steel, Molded resin Metal Ball Chain SUS or Brass Link Bracket S/M Steel, Molded resin
Allowable
Size
W1, W2 2500 mm (98.4")
* W1, W2, W3 1500 mm (59.1") 41 mm DIA
22 23
Mytec 01 Mytec 01
Side Holder
Cover *
4 mm (.16") 4 mm (.16") Link Joint Pipe End
Roller Pipe with
Chain Housing
26 mm (1.0") 26 mm (1.0")
*Metal Ball Chain only.
Product
16 mm (.63") 21 mm (.83") height (H)
Weight Bar
Specifications
Spring Set Steel, Molded resin Metal Ball Chain SUS or Brass Link Bracket S/M Steel, Molded resin
Allowable
Size
W1, W2 2500 mm (98.4")
* W1, W2, W3 1500 mm (59.1") 41 mm DIA
22 23
Mytec 01 Mytec 01
Chain Housing
21.5 mm
4 mm (.16") 4 mm (.16") (.85") Bracket Weight Bar
18 mm
65 mm (2.8") (.71")
45 mm (1.8")
20 mm
(.79")
Both Sides Operation One Side Operation
16 mm (.63")
15 mm (.59")
28 mm Non wrapping Wrapping
16 mm (.63") 4.2 mm (.17") (1.1") type type
43 mm 16 mm 33 mm
(1.7") (.63") (1.3")
83 mm
102 mm (3.3")
(4.0") 49 mm
(1.9")
Roller Pipe Aluminum Plastic Ball Chain Molded resin MT03 Weight Bar Cap Molded resin
Spring Set Steel, Molded resin Metal Ball Chain Connector SUS or Brass Double Bracket Plate Steel Specifications
Non-Balancer Set Steel, Molded resin Plastic Ball Chain Joints Molded resin SP Side Mount Molded resin
Double Type (1 unit)
Chain Housing Steel, Molded resin MT03 Weight Bar Aluminum Chain Side Mount Molded resin
Maximum Screen Weight For Metal Ball Chain; 3.7 kg (8.2 lb), Plastic Ball Chain; 3.2 kg (7.1 lb), per screen
Metal Ball Chain SUS or Brass
4.2 kg (9.3 lb)
Product Weight
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Double Bracket Plate, Metal Ball Chain length is 3000 mm (118")
Allowable
Product Width (W) 300 mm (11.8") to 2700 mm (106")
*
Size Product Height (H) 100 mm (3.9") to 3000 mm (118")
Ratio (W : H) 1 : 3 (limit)
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
24 25
Mytec 01 Mytec 01
Chain Housing
21.5 mm
4 mm (.16") 4 mm (.16") (.85") Bracket Weight Bar
18 mm
65 mm (2.8") (.71")
45 mm (1.8")
20 mm
(.79")
Both Sides Operation One Side Operation
16 mm (.63")
15 mm (.59")
28 mm Non wrapping Wrapping
16 mm (.63") 4.2 mm (.17") (1.1") type type
43 mm 16 mm 33 mm
(1.7") (.63") (1.3")
83 mm
102 mm (3.3")
(4.0") 49 mm
(1.9")
Roller Pipe Aluminum Plastic Ball Chain Molded resin MT03 Weight Bar Cap Molded resin
Spring Set Steel, Molded resin Metal Ball Chain Connector SUS or Brass Double Bracket Plate Steel Specifications
Non-Balancer Set Steel, Molded resin Plastic Ball Chain Joints Molded resin SP Side Mount Molded resin
Double Type (1 unit)
Chain Housing Steel, Molded resin MT03 Weight Bar Aluminum Chain Side Mount Molded resin
Maximum Screen Weight For Metal Ball Chain; 3.7 kg (8.2 lb), Plastic Ball Chain; 3.2 kg (7.1 lb), per screen
Metal Ball Chain SUS or Brass
4.2 kg (9.3 lb)
Product Weight
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Double Bracket Plate, Metal Ball Chain length is 3000 mm (118")
Allowable
Product Width (W) 300 mm (11.8") to 2700 mm (106")
*
Size Product Height (H) 100 mm (3.9") to 3000 mm (118")
Ratio (W : H) 1 : 3 (limit)
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
24 25
Mytec 01 Mytec 01
Double Bracket
W2 W1 120 mm (4.7") Structure for Double Link Bracket
Plate Roller Pipes with and Link Joint Pin
101 mm (4.0") Chain Housing
Product width (W) Link Joint Pipe End
41 mm (1.6")
30 mm (1.2") 30 mm (1.2") 30 mm (1.2") Double Bracket Plate
43 mm
(1.7")
83 mm 102 mm
(3.3") (4.0")
Link Joint
Pipe End
Product
height
26 mm (1.0") 20.5 mm (.81")
(H)
15.5 mm W2 – 29 mm (1.1") W1 – 34 mm (1.3") Chain Side Mount
(.61")
24 mm (.94")
Left A–H
Room Side
Metal Ball Chain
Screen Right AL – HL
2 Units Link 3 Units Link
Window Side
Left AL – HL *Metal Ball Chain only.
Screen Right A–H
Both
Bracket Weight Bar
Sides 18 mm
Operation 65 mm (2.8") (.71")
45 mm (1.8")
20 mm
Room side (.79")
screen
Window side 16 mm (.63")
screen 15 mm (.59")
28 mm Non wrapping Wrapping
*Spring Set for room side screen 16 mm (.63") 4.2 mm (.17") (1.1") type type
is reverse.
43 mm 16 mm 33 mm
(1.7") (.63") (1.3")
83 mm
One 102 mm (3.3")
(4.0") 49 mm
Side
(1.9")
Operation
41 mm (1.6") 16 mm
(.63")
101 mm (4.0")
120 mm (4.7")
Specifications
Metal Ball Chain SUS or Brass Link Joint Pin Brass Chain Side Mount Molded resin
Allowable
Size
W1, W2 2500 mm (98.4")
* W1, W2, W3 1500 mm (59.1") 41 mm DIA
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more by 2 Unit Link.
26 27
Mytec 01 Mytec 01
Double Bracket
W2 W1 120 mm (4.7") Structure for Double Link Bracket
Plate Roller Pipes with and Link Joint Pin
101 mm (4.0") Chain Housing
Product width (W) Link Joint Pipe End
41 mm (1.6")
30 mm (1.2") 30 mm (1.2") 30 mm (1.2") Double Bracket Plate
43 mm
(1.7")
83 mm 102 mm
(3.3") (4.0")
Link Joint
Pipe End
Product
height
26 mm (1.0") 20.5 mm (.81")
(H)
15.5 mm W2 – 29 mm (1.1") W1 – 34 mm (1.3") Chain Side Mount
(.61")
24 mm (.94")
Left A–H
Room Side
Metal Ball Chain
Screen Right AL – HL
2 Units Link 3 Units Link
Window Side
Left AL – HL *Metal Ball Chain only.
Screen Right A–H
Both
Bracket Weight Bar
Sides 18 mm
Operation 65 mm (2.8") (.71")
45 mm (1.8")
20 mm
Room side (.79")
screen
Window side 16 mm (.63")
screen 15 mm (.59")
28 mm Non wrapping Wrapping
*Spring Set for room side screen 16 mm (.63") 4.2 mm (.17") (1.1") type type
is reverse.
43 mm 16 mm 33 mm
(1.7") (.63") (1.3")
83 mm
One 102 mm (3.3")
(4.0") 49 mm
Side
(1.9")
Operation
41 mm (1.6") 16 mm
(.63")
101 mm (4.0")
120 mm (4.7")
Specifications
Metal Ball Chain SUS or Brass Link Joint Pin Brass Chain Side Mount Molded resin
Allowable
Size
W1, W2 2500 mm (98.4")
* W1, W2, W3 1500 mm (59.1") 41 mm DIA
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed.
Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more by 2 Unit Link.
26 27
Mytec 01 Mytec 01
Typical Roll-up Diameter See 30 pages about diamerter in Top Box type. Installation Dimensions
Roller pipe 41 mm (1.6") dia. / Selection of Side Holder Standard Type
Height
Class 400 mm 800 mm 1200 mm 1600 mm 2000 mm 2400 mm 2800 mm 3000 mm Ceiling attachment Wall attachment
(Thickness) (16") (32") (47") (63") (79") (94") (110") (118")
K 1.11–1.20 mm 51 mm (2.0") 57 mm (2.2") 62 mm (2.4") 67 mm (2.6") 71 mm (2.8") 76 mm (3.0") 80 mm (3.2") — Roll-up dia.
A=a+
L 1.21–1.37 mm 53 mm (2.1") 59 mm (2.3") 65 mm (2.6") 70 mm (2.8") 75 mm (2.9") 79 mm (3.1") — —
2
*The roll-up diameter might be actually different. area: Side Bracket Type = S, Set Bar Type = M
*Please contact our local agent for another size. area: Side Bracket Type = M, Set Bar Type = L a
Product
Side Holder S Side Holder M Side Holder L
F 0.61–0.70 mm 52 mm (2.1") 55 mm (2.2") 58 mm (2.3") 61 mm (2.4") 64 mm (2.5") 67 mm (2.6") 70 mm (2.8") 71 mm (2.7") Ceiling/Wall attachment
G 0.71–0.80 mm 52 mm (2.1") 56 mm (2.2") 60 mm (2.4") 63 mm (2.4") 66 mm (2.6") 69 mm (2.7") 72 mm (2.8") 74 mm (2.9") Roll-up dia. Roll-up dia.
B A=a+ B=b+
H 0.81–0.90 mm 53 mm (2.1") 57 mm (2.2") 61 mm (2.4") 65 mm (2.6") 68 mm (2.7") 72 mm (2.8") 75 mm (3.0") 76 mm (3.0") 2 2
I 0.91–1.00 mm 54 mm (2.1") 58 mm (2.3") 63 mm (2.4") 67 mm (2.6") 70 mm (2.8") 74 mm (2.9") 77 mm (3.0") 79 mm (3.1") Screen 1 Roll-up dia. Screen 2 Roll-up dia.
+ < C
2 2
J 1.01–1.10 mm 55 mm (2.2") 60 mm (2.4") 64 mm (2.5") 68 mm (2.7") 72 mm (2.8") 76 mm (3.0") 80 mm (3.1") —
Screen 1
Screen 2
28 29
Mytec 01 Mytec 01
Typical Roll-up Diameter See 30 pages about diamerter in Top Box type. Installation Dimensions
Roller pipe 41 mm (1.6") dia. / Selection of Side Holder Standard Type
Height
Class 400 mm 800 mm 1200 mm 1600 mm 2000 mm 2400 mm 2800 mm 3000 mm Ceiling attachment Wall attachment
(Thickness) (16") (32") (47") (63") (79") (94") (110") (118")
K 1.11–1.20 mm 51 mm (2.0") 57 mm (2.2") 62 mm (2.4") 67 mm (2.6") 71 mm (2.8") 76 mm (3.0") 80 mm (3.2") — Roll-up dia.
A=a+
L 1.21–1.37 mm 53 mm (2.1") 59 mm (2.3") 65 mm (2.6") 70 mm (2.8") 75 mm (2.9") 79 mm (3.1") — —
2
*The roll-up diameter might be actually different. area: Side Bracket Type = S, Set Bar Type = M
*Please contact our local agent for another size. area: Side Bracket Type = M, Set Bar Type = L a
Product
Side Holder S Side Holder M Side Holder L
F 0.61–0.70 mm 52 mm (2.1") 55 mm (2.2") 58 mm (2.3") 61 mm (2.4") 64 mm (2.5") 67 mm (2.6") 70 mm (2.8") 71 mm (2.7") Ceiling/Wall attachment
G 0.71–0.80 mm 52 mm (2.1") 56 mm (2.2") 60 mm (2.4") 63 mm (2.4") 66 mm (2.6") 69 mm (2.7") 72 mm (2.8") 74 mm (2.9") Roll-up dia. Roll-up dia.
B A=a+ B=b+
H 0.81–0.90 mm 53 mm (2.1") 57 mm (2.2") 61 mm (2.4") 65 mm (2.6") 68 mm (2.7") 72 mm (2.8") 75 mm (3.0") 76 mm (3.0") 2 2
I 0.91–1.00 mm 54 mm (2.1") 58 mm (2.3") 63 mm (2.4") 67 mm (2.6") 70 mm (2.8") 74 mm (2.9") 77 mm (3.0") 79 mm (3.1") Screen 1 Roll-up dia. Screen 2 Roll-up dia.
+ < C
2 2
J 1.01–1.10 mm 55 mm (2.2") 60 mm (2.4") 64 mm (2.5") 68 mm (2.7") 72 mm (2.8") 76 mm (3.0") 80 mm (3.1") —
Screen 1
Screen 2
28 29
Mytec 01 Mytec 01
K 1.11–1.20 mm 51 mm (2.0") 57 mm (2.2") 62 mm (2.4") 67 mm (2.6") 71 mm (2.8") — — — Roll-up dia. Roll-up dia. Roll-up dia.
L 1.21–1.37 mm 53 mm (2.1") 59 mm (2.3") 65 mm (2.6") 70 mm (2.8") 75 mm (2.9") — — — 2
*The roll-up diameter might be actually different. area: Side Holder S for Top Box
*Please contact our local agent for another size. area: Side Holder M for Top Box
Roll-up dia.
A=a+
Roller pipe 45 mm (1.8") dia. / Selection of Side Holder (Mytec 01 Loop only) 2
Height 400 mm 800 mm 1200 mm 1600 mm 2000 mm 2400 mm 2800 mm 3000 mm
Class
(Thickness) (16") (32") (47") (63") (79") (94") (110") (118")
a B C
A –0.20 mm 48 mm (1.9") 49 mm (1.9") 50 mm (2.0") 51 mm (2.0") 52 mm (2.0") 53 mm (2.1") 54 mm (2.1") 55 mm (2.2") Product
Top Box S Top Box M Top Box S Top Box M Top Box S Top Box M
B 0.21–0.30 mm 49 mm (1.9") 50 mm (2.0") 52 mm (2.1") 53 mm (2.1") 55 mm (2.2") 56 mm (2.2") 58 mm (2.3") 58 mm (2.3")
Ceiling attachment 38 mm (1.5") 47 mm (1.9") 70 mm (2.6") 89 mm (3.5") 70 mm (2.6") 90 mm (3.5")
C 0.31–0.40 mm 50 mm (2.0") 52 mm (2.1") 54 mm (2.1") 55 mm (2.2") 57 mm (2.2") 59 mm (2.3") 61 mm (2.4") 62 mm (2.4")
Ceiling Bracket attachment 42 mm (1.7") 51 mm (2.0") 74 mm (2.9") 93 mm (3.7") 80 mm (3.1") 100 mm (3.9")
Mytec 01 Loop
D 0.41–0.50 mm 50 mm (2.0") 53 mm (2.1") 55 mm (2.2") 57 mm (2.2") 60 mm (2.4") 62 mm (2.4") 64 mm (2.5") 65 mm (2.6")
Mytec 01
Wall attachment 38 mm (1.5") 48 mm (1.9") 70 mm (2.6") 90 mm (3.5") 70 mm (2.6") 89 mm (3.5")
E 0.51–0.60 mm 51 mm (2.0") 54 mm (2.1") 57 mm (2.2") 59 mm (2.3") 62 mm (2.4") 64 mm (2.5") 67 mm (2.6") 68 mm (2.8")
Wall Bracket attachment 48 mm (1.9") 58 mm (2.3") 80 mm (3.1") 100 mm (3.9") 74 mm (2.9") 93 mm (3.7")
F 0.61–0.70 mm 52 mm (2.1") 55 mm (2.2") 58 mm (2.3") 61 mm (2.4") 64 mm (2.5") 67 mm (2.6") 70 mm (2.8") 71 mm (2.7")
*The roll-up diameter might be actually different. area: Side Holder S for Top Box
*Please contact our local agent for another size. area: Side Holder M for Top Box
30 31
Mytec 01 Mytec 01
K 1.11–1.20 mm 51 mm (2.0") 57 mm (2.2") 62 mm (2.4") 67 mm (2.6") 71 mm (2.8") — — — Roll-up dia. Roll-up dia. Roll-up dia.
L 1.21–1.37 mm 53 mm (2.1") 59 mm (2.3") 65 mm (2.6") 70 mm (2.8") 75 mm (2.9") — — — 2
*The roll-up diameter might be actually different. area: Side Holder S for Top Box
*Please contact our local agent for another size. area: Side Holder M for Top Box
Roll-up dia.
A=a+
Roller pipe 45 mm (1.8") dia. / Selection of Side Holder (Mytec 01 Loop only) 2
Height 400 mm 800 mm 1200 mm 1600 mm 2000 mm 2400 mm 2800 mm 3000 mm
Class
(Thickness) (16") (32") (47") (63") (79") (94") (110") (118")
a B C
A –0.20 mm 48 mm (1.9") 49 mm (1.9") 50 mm (2.0") 51 mm (2.0") 52 mm (2.0") 53 mm (2.1") 54 mm (2.1") 55 mm (2.2") Product
Top Box S Top Box M Top Box S Top Box M Top Box S Top Box M
B 0.21–0.30 mm 49 mm (1.9") 50 mm (2.0") 52 mm (2.1") 53 mm (2.1") 55 mm (2.2") 56 mm (2.2") 58 mm (2.3") 58 mm (2.3")
Ceiling attachment 38 mm (1.5") 47 mm (1.9") 70 mm (2.6") 89 mm (3.5") 70 mm (2.6") 90 mm (3.5")
C 0.31–0.40 mm 50 mm (2.0") 52 mm (2.1") 54 mm (2.1") 55 mm (2.2") 57 mm (2.2") 59 mm (2.3") 61 mm (2.4") 62 mm (2.4")
Ceiling Bracket attachment 42 mm (1.7") 51 mm (2.0") 74 mm (2.9") 93 mm (3.7") 80 mm (3.1") 100 mm (3.9")
Mytec 01 Loop
D 0.41–0.50 mm 50 mm (2.0") 53 mm (2.1") 55 mm (2.2") 57 mm (2.2") 60 mm (2.4") 62 mm (2.4") 64 mm (2.5") 65 mm (2.6")
Mytec 01
Wall attachment 38 mm (1.5") 48 mm (1.9") 70 mm (2.6") 90 mm (3.5") 70 mm (2.6") 89 mm (3.5")
E 0.51–0.60 mm 51 mm (2.0") 54 mm (2.1") 57 mm (2.2") 59 mm (2.3") 62 mm (2.4") 64 mm (2.5") 67 mm (2.6") 68 mm (2.8")
Wall Bracket attachment 48 mm (1.9") 58 mm (2.3") 80 mm (3.1") 100 mm (3.9") 74 mm (2.9") 93 mm (3.7")
F 0.61–0.70 mm 52 mm (2.1") 55 mm (2.2") 58 mm (2.3") 61 mm (2.4") 64 mm (2.5") 67 mm (2.6") 70 mm (2.8") 71 mm (2.7")
*The roll-up diameter might be actually different. area: Side Holder S for Top Box
*Please contact our local agent for another size. area: Side Holder M for Top Box
30 31
Mytec 01 Mytec 01
Mytec 01 Parts
Product Name Side Bracket Type Set Bar Type Side Product Code Product Name Side Bracket Type Set Bar Type Side Product Code
Set Bar Set Bar
Bracket Bracket
Left Right Left Right Type Left Right Left Right Type
Operation Operation Operation Operation Type Operation Operation Operation Operation Type
Connect Pin
Roller Pipe 2800 mm 1.6 mm x 18 mm Chromate
41 mm 01030242
01030199
DIA
Speed Controller
400
45 mm* GFCM
01030240
DIA *
( 1)
C 01030212
Stop Controller
D 01030213
*
E 01030214
F 01030215 01030207
G 30000144
H 30000146
*(Depend
Minimum width is 600 mm (23.6") at Stop Controller using.
on the screen.)
Y 01030248
BL 01030217
30005338
CL 01030218
DL 01030219
*
EL 01030220
Chain Housing G/H
FL 01030221
GL 30000145
30005339
*For room side screen by Double type.
Refer to page 25 or 27. HL 30000147
Non-Balancer Set
Pipe End
01030222
01030203
32 33
Mytec 01 Mytec 01
Mytec 01 Parts
Product Name Side Bracket Type Set Bar Type Side Product Code Product Name Side Bracket Type Set Bar Type Side Product Code
Set Bar Set Bar
Bracket Bracket
Left Right Left Right Type Left Right Left Right Type
Operation Operation Operation Operation Type Operation Operation Operation Operation Type
Connect Pin
Roller Pipe 2800 mm 1.6 mm x 18 mm Chromate
41 mm 01030242
01030199
DIA
Speed Controller
400
45 mm* GFCM
01030240
DIA *
( 1)
C 01030212
Stop Controller
D 01030213
*
E 01030214
F 01030215 01030207
G 30000144
H 30000146
*(Depend
Minimum width is 600 mm (23.6") at Stop Controller using.
on the screen.)
Y 01030248
BL 01030217
30005338
CL 01030218
DL 01030219
*
EL 01030220
Chain Housing G/H
FL 01030221
GL 30000145
30005339
*For room side screen by Double type.
Refer to page 25 or 27. HL 30000147
Non-Balancer Set
Pipe End
01030222
01030203
32 33
Mytec 01 Mytec 01
Product Name Side Bracket Type Set Bar Type Side Product Code Product Name Side Bracket Type Set Bar Type Side Product Code
Set Bar Set Bar
Bracket Bracket
Left Right Left Right Type Left Right Left Right Type
Operation Operation Operation Operation Type Operation Operation Operation Operation Type
Right
Warm White 30003447 *Set Bar type only
Gray 30003448 Metal Ball Chain
Black 30003449 SUS 30005358
Black 30003459
White 30003524
L White 30003460
Black 30003468
L White 30003469
Black 30003473
White 30003474
Black 30003477
34 35
Mytec 01 Mytec 01
Product Name Side Bracket Type Set Bar Type Side Product Code Product Name Side Bracket Type Set Bar Type Side Product Code
Set Bar Set Bar
Bracket Bracket
Left Right Left Right Type Left Right Left Right Type
Operation Operation Operation Operation Type Operation Operation Operation Operation Type
Right
Warm White 30003447 *Set Bar type only
Gray 30003448 Metal Ball Chain
Black 30003449 SUS 30005358
Black 30003459
White 30003524
L White 30003460
Black 30003468
L White 30003469
Black 30003473
White 30003474
Black 30003477
34 35
Mytec 01 Mytec 01
Left 30003498
M
MT03 Weight Bar Cap White 01030265
Right 30003499
White 01030188
M 30003503
White 01030193
M 30003505
*wrapping
For non wrapping and
type
*For MT03 Weight Bar only *With Stop Controller
MT03 Flat Grip Set Top Box Ceiling Bracket
30003494
White 01030195
01030235
30003495
Fastener
White 60700091
36 37
Mytec 01 Mytec 01
Left 30003498
M
MT03 Weight Bar Cap White 01030265
Right 30003499
White 01030188
M 30003503
White 01030193
M 30003505
*wrapping
For non wrapping and
type
*For MT03 Weight Bar only *With Stop Controller
MT03 Flat Grip Set Top Box Ceiling Bracket
30003494
White 01030195
01030235
30003495
Fastener
White 60700091
36 37
Mytec 01 Mytec 01
S 30003488
30003506
M 30003489
*
( 1)
30003507
M 30003491
*
( 1)
White
White 30003508
M 30003493
White 30003509
Wire Base
White 30003514
*
( 1)
*forInstall in piles,
screen touches parts side.
Weight Bar Cap for Side Frame
Wire (Nylon) ø1.5
30003526
White 30003511
38 39
Mytec 01 Mytec 01
S 30003488
30003506
M 30003489
*
( 1)
30003507
M 30003491
*
( 1)
White
White 30003508
M 30003493
White 30003509
Wire Base
White 30003514
*
( 1)
*forInstall in piles,
screen touches parts side.
Weight Bar Cap for Side Frame
Wire (Nylon) ø1.5
30003526
White 30003511
38 39
Mytec 01
Mytec 01
Top Box Side Frame Guide Wire
Product Name
Type Type Type
Link Type * * Product Code
Left Right Left Right
* * Operation Operation Operation Operation Oct. 2012
Double Bracket Plate White 30000129
RENEWAL
Black 30000128
White 30000133
Black 30000132
Gray 30000136
Black
*Use with Double Bracket Plate 30000135
Gray 30000140
Black
*Use with Double Bracket Plate 30000139
Black 30003519
White 30003520
Black 30000115 type, Guide Wire type, Link type and Double type.
Link Joint Pipe End
The Speed Controller installed in the Spring Drive
30000142
System, Mytec 01 prevents the blind from going up
rapidly.
Link Joint Pin
30000125
201408E
40