Professional Documents
Culture Documents
Control Panel Speed Control Unit, ON / OFF Switch, Mains Indicator etc.
Apparatus used for measuring the sliding angle of repose. (a) assembly of apparatus, (b)
schematic of apparatus with dimensions.
These are especially designed for short arc capability of welding with wire size ranging from
0.06 to 1.2/1.2 to 1.6 mm. In our machines, the weld is down to upto 30 amps and these are
best suited for sheet metal application. Moreover, our machines are ideal for general
fabrication purposes upto 250 amps.
Low power consumption due to excellent power factor maintenance & friendly component
Separate lightweight wire feeder provides better reach
Wire feeder incorporates 2 stroke or 4 stroke operation and burn-off control for easy welding
Wire inching and gas purge switches are standard for easier parameter setting
M.S. reservoir with gauge glass & scale fitting, drain valve of ½ ” size & a
bend.
Control Panel consists of Energy meter, switch, Speed Controller & digital
speed indicator.
The individual gauge block is a metal or ceramic block that has been
precision ground and lapped to a specific thickness. Gauge blocks
come in sets of blocks with a range of standard lengths. In use, the
blocks are stacked to make up a desired length. The blocks are joined
by a sliding process called wringing, which causes their ultraflat
surfaces to cling together. A small number of gauge blocks can be used
to create accurate lengths within a wide range.We can offer slip gauges
in inspection, workshop and standards room grades and can be directly
used for checking width of slots. Other than this, these can also be used
for setting comparators
Colour Yellow
Number of Items 1
Part Number TIG-200A
Specifications:
Range: 500 kg × 1 kg least count
Speed: Variable 20 to 500 mm/min
Traverse: 25 mm to 900 mm
Motor: 1 Hp,
3 phase
Universal Testing Machine
The Asian UTM -digital provide a relatively inexpensive way for determining
the Tensile,compression,shear strength and elongation of variety of raw
materials such as metals,rubber, leather , fabric, plastics, Belts , wires
etcetera. They are based on constant rate of traverse principle in which one
end of the test specimen is held in a stationary grip, while the other end is
made to move at a known fixed speed. The load exerted on the stationary
grip indicated by a digital load indicator. The controller is microproccer based
and has the facility of over load protection, peak hold and auto calibration.
The load directly indicated in kilograms or Newton OR KN.
The elongation of the test specimen is measured on a linear scale (or digital
indicator according to the model) fixed on the frame of the tester, which
indicates the distance between the grips.
The frame of the tester fabricated from mild steel to give the required rigidity
and strength. Various built in safety arrangements such as over travel
protection, Are provided.