Professional Documents
Culture Documents
Carryback falls under the conveyor, spillage falls to the sides and dust falls on everything,
including systems and structures above the conveyor. Left unchecked, fugitive materials
represent an ever-increasing drain on a conveyor’s efficiency, productivity and profitability.
Materials lost from the conveyor system cost the plant in a number of ways.
3
A NEW STANDARD FOR
CONVEYOR DESIGN
Martin Engineering has created a new standard in conveyor
architecture. The modular system rethinks
the problems of traditional conveyor design from
the ground up and places more emphasis on safety,
control of fugitive material and ease of service.
5
BELT SUPPORT
MARTIN® COMBINATION CRADLE
The center-roll option reduces friction and requires less conveyor drive
horsepower than bars. Roller kit available for use with multiple units.
Track-mounted to simplify
installation and maintenance.
Roller Option
Roller kits available for installing
two units back to back.
30 9.0
25 Heavy-Duty 7.6
20 6.0
15 4.5 Medium Duty
10
Medium-Duty 3.0
5 1.3
Light-Duty
0 0
40 50 60 70 80 90 100 110 120 130 140 150
(18) (23) (27) (32) (36) (41) (45) (50) (54) (59) (64) (68)
Code L M H
Rating Light-Duty Medium-Duty Heavy-Duty
Impact (lbf.) < 8,500 < 12,000 < 17,000 Heavy Duty
Force (kN) < 35 < 53 < 76
lb.-ft. < 200 < 1000 < 2000
W x h (ref.)
kg-m < 28 < 138 < 277
7
MARTIN® MODULAR SLIDER CRADLE
MODULAR UPGRADE:
Track-mounted to simplify installation and maintenance.
Eliminates pinch points where trapped material can gouge or tear the
belt and stabilizes the belt’s path to improve sealing and tracking.
The conveyor belt glides over its UHMW bars without heat buildup.
Its unique “box bars” provide dual-wear surfaces for double wear life
Simple retrofit links two or more troughing idler frames, replacing the wing
rollers with Martin® Slider Bars. Utilizes existing idler frames and center
rollers and conforms with idlers from a wide range of manufacturers.
Idler Removal: Simply remove one bolt and sliding roller frames will
allow servicing without raising the belt or removing adjacent idlers.
9
SEALING SYSTEMS
MARTIN® EXTERNAL WEAR LINER
3.75 (95)
3.50 (89)
3.25 (83)
3.00 (76)
2.50 (63)
2.00 (51)
Self-Adjusting Standard Heavy Duty
Skirting ApronSeal™ ApronSeal™
11
BELT TRACKING
MARTIN® TRACKER™
upper unit
1.0 24.5
Belt Thickness (in)
0.875 22.2
Heavy-Duty
0.75 19.0
0.625 15.9
0.5 12.7
0.375 9.5
0.25 Standard-Duty 6.3
0.125 3.2
0.0 0.0
0 200 (1) 400 (2) 600 (3) 700 (3.5) 800 (4)
lower unit
Belt Speed – ft/min (m/s)
ion
Bel t Dir ect
Belt Direction
Belt Direction
ion
Bel t Dir ect
Steering Parallel Guide Steering Parallel
Roll Stay Roll Roll Stay Guide
Roll
13
TAIL PULLEY PROTECTION
MARTIN® VPLOW XHD
MARTIN® VPLOW HD
15
CHUTE STRUCTURE
MARTIN® MODULAR STRINGER SYSTEM
SKIRTBOARD EXTENSION
SKIRTBOARD
17
BELT SUPPORT
Martin® Idler Conversion Kit
Martin® Combination Cradle
P/N 37135
Cradle/Bars P/N UCGBB
Bar Material UHMW Polyethylene
Cradle/Roller P/N UCGBR
Flat Cradle P/N 31880 Martin® High-Speed Roller Cradle
Picking Cradle P/N 37057 P/N HSRC
Roller Cradle Roller Kit P/N UC-001670
Bar Material Rubber/Urethane
BELT SEALING
Replacement Bar (Urethane/UHMW) UC-001630
Martin® External Wear Liner
Duty Rating Medium
P/N UC-003010
Martin® Impact Cradle HD
Martin® ApronSeal™ Skirting
P/N 37357
Sealing System Selection
Replacement Bar (Rubber/UHMW) 36570 L3636
Guide
Standard Bar Length 24 in Single Skirting P/N 100724
Top Cover Material UHMW Single Skirting HD P/N 100723
Double Skirting P/N 100873
Martin® Impact Cradle LD & MD
Double Skirting HD P/N 100861
Medium Duty - 4ft bars P/N 36318
Material Durometer 60 or 70 (standard)
Medium Duty - 5ft bars P/N 36516
Continuous lengths 300 feet
Light Duty P/N 36010
Trough Range 0° to 45°
Replacement Bar (Urethane/UHMW) 39102-4
standard, low-profile, heavy-
Standard Bar Length 48 in. Clamp Options
duty, quick release
Top Cover Material UHMW
Martin® Self Adjusting Skirting HD
Martin® Trac-Mount Idlers
P/N 37911
P/N TMIXXP
Replacement Rubber P/N 37911-R
Steel, Impact,
Roller Options Continuous Lengths 100 feet
Combination
Min. belt edge requirement 1.25 inches
Diameter Range 4 to 7 inches
CEMA Classes A through E MARTIN® Tail Sealing Box
P/N UCRR
19
GLOBAL LOCATIONS
Patents and patents pending ® Registered trademark of Martin Engineering Company in the US and other select locations. © 2019 Martin Engineering Company.