Professional Documents
Culture Documents
STEP#2:
Then Save a file (with your name and registration number) using Save As optio in
solidworks.
STEP#3:
Select Right plane and select sketch and start sketching, then select spline and
making sketch with given dimensions as shown in figure.
STEP#5:
Then draw a three point CenterPoint arc on 1st plane as shown in figure and
make dimensions given below.
STEP#6:
Then start sketching on top plane(2nd plane) , use 3Point arc to draw the given
sketch as shown in figure.
STEP#9:
Then apply a face fillet of 3mm on top of sketch as shown in figure.
STEP#10:
Then apply fillet of 10mm on top of sketch
STEP#11:
Then select the top plane and sketch and extrude the given space for scroll button
with given dimensions, and use the extrude cut command to remove extra space.
STEP#12:
Then apple the straight slot and use extrude cut option to cut it.
STEP#12:
Then in slot draw a circle of given dimensions.
STEP#13:
Then use extrude boss/base command.
TOP VIEW:
SIDE VIEW (Right side):
Sectional view: