Professional Documents
Culture Documents
Data BIOSTATCultiBagSTR200 Plus SBI2021-e
Data BIOSTATCultiBagSTR200 Plus SBI2021-e
Pumps
– 3 + integrated digital peristaltic pumps
per side
– Configurable to pH or substrate controller
Packages Digital Control – 2 additional integrated or external feed
The BIOSTAT® CultiBag STR Plus 200L – Graphical user interface with colour display pumps per side available on request
disposable bioreactor packages are specially and touch screen operation
configured for cell culture applications. – Integrated amplifiers for temperature, Temperature
The integrated, automatically-controlled pressure, disposable DO and pH sensors – Choice between heating only or
gas mixing system provides advanced sparger – Additional amplifiers for reusable DO & heating|cooling:
and overlay aeration. Air and CO2 are routed pH sensor available
to Overlay. Air, N2, O2 and CO2 are routed to – Integrated control loops for temperature, Heating Only
Sparger. Control happens automatically via DO, pH, agitation, gas flow and substrate – 1 + 1.000 W and 2 + 500 W heating
a DO and pH controller. Optional soft buttons – Multi-stage DO cascade control blankets around bag holder
the N2 and O2 can be used to redirect gases – Calibration of DO and pH sensors – Temperature range: ambient - 40°C
to overlay or sparger via manual selection. – In-process DO and pH recalibration – Automatic safety shutdown for prevention
– Trend display for up to 6 process values of overheating
Six rotameters are available for control of Air – Up to 2 direct balance connections – Filter Heater on exhaust filter
(2+), N2, CO2 (2+) and O2. Up to 6 mass flow
controllers may be added as options for Gassing Module Heating|Cooling
individual flow rate adjustments of Air (2+), – 1 + Sparger outlet – Jacketed vessel for cooling water
N2, CO2 (2+) and O2. – 1 + Overlay outlet – Electrical heater 3.000 W
– 4-fold gasmixing of Air, N2, O2 and CO2 – Cooling water control valve
BIOSTAT® STR Plus 200L Control Tower for Sparger gassing – Circulation pump
– For measurement & control hardware, – Air and CO2 for Overlay gassing – Quick coupling connectors for the jacket
pumps & gassing system – Optional soft buttons allow for change of the bagholder
– Available as single and twin configuration of gassing direction for N2 and O2 from – Temperature range: 8°C above cooling
for control of up to two disposable CultiBag Sparger to Overlay water to 40°C
STR cultivation vessels – Solenoid valves for Air (2+), N2(1+), O2 (1+) – Automatic safety shutdown for prevention
– Installed on separate skid and CO2 (2+) of overheating
– Rotameters for Air (2+), N2 (1+), O2 (1+) – Filter Heater on exhaust filter
and CO2 (2+)
– Up to 6 optional Massflow Controllers* Agitation System
for Air (2+), N2(1+), O2 (1+) and CO2 (2+) – Magnetic drive
– Control via pH/DO controller – Speed range from 20 up to 150 rpm
– Quiet operation
– Stirrer pre-installed inside disposable
CultiBag STR
Applications
– Cell culture of insect and mammalian cells
– Cell mass, protein, Mab & vaccine
production
– Industrial and academic research
– Process development
– Process optimization
– Up- and down-scale studies
– Seed culture cultivation
– Large scale production up to 200 L
UK +44.1372.737159
France +33.442.845600
Italy +39.055.63.40.41
Spain +34.91.3586102
Japan +81.3.3740.5407
Specifications subject to change
without notice. Printed and copyrighted
by Sartorius Stedim Biotech GmbH
W·G
Publication No.: SBI2021-e09093
Order No.: 85034-536-12
Ver. 09 | 2009