2 Fuel Oil: Fork Lifter should be suitable to operate Comply
on High Speed Diesel Oil
3. Condition: Fork Lifter should be brand new in all Comply
aspects.
4. Spare Parts: A list of spare parts including lubricants, Comply
greases, filters, air cleaners or tool for the Fork Lifter and other items essential for normal maintenance and operation of the Fork Lifter for 12 months service should be submitted indicating the price of each item separately.
5. Tool Kit: Tool kit with lock containing essential Comply
tools necessary for routine maintenance and overhauling of Fork Lifter should be included in the standard equipment of the Fork Lifter (without any additional cost).
6. Warranty: Warranty for trouble free service of two Comply
years (24 months) from the time of start of working.
7. Drawing & Five copies of general layout, wiring Comply
Manuals: diagram, PCB diagram if PCB is used, operation/maintenance manual, lubricant chart, catalogue or any other special instructions etc, should be supplied at the time of delivery of Fork Lifter. (Page No.2)
8. Pre-Shipment 1) The successful bidder shall arrange Comply
Inspection: pre-shipment inspection/testing by one representative of Stores branch and one representative of Mechanical Branch. The testing/inspection cost including air ticket, inland travelling, boarding, lodging, out of pocket expenses, and incidental charges personal expenses, daily allowances etc shall be borne by the bidder. 2) The successful bidder will arrange necessary visa and travelling documents without any additional charges in this regard. 3) The firm/supplier shall inform the purchaser atleast 30 days in advance of the readiness of Fork Lifter for inspection. 4) Above mentioned officer/official will carry out the detail inspection as per Pakistan Railways specification and scope of work. 5) No such inspection, examination or testing shall release the seller from any of its obligations under the contract.
9. Working Tests: The contractor shall arrange proper Comply
working of the Fork Lifter immediately, after receipt at General Stores (Main depot) Moghalpura. The contractor would be required to inspect/check the consignment jointly before start of working, and components, to avoid subsequent complaint regarding short shipment or transit damages. (Page No.3)
Training: The contractor shall arrange to provide Comply
10. free training by the technical experts to the staff nominated by the consignee for a period of 2 (two) weeks to 4 (four) weeks at Pakistan Railways General Stores (Main deport) Moghalpura in maintenance, repairs, overhauling and operations during commissioning of the Fork Lifter. All expenses quoted separately regarding this training will be borne by the seller. This training will be in operation/maintenance of the equipment and will include programming for trouble shooting and repair of the Fork Lifter and its accessories. The training to be imparted will cover all mechanical/electrical/electronic equipment.
11. Recommended Following make and country of origin of Komatsu - Japan
Brands of Fork Fork Lifter would only be acceptable: Lifter: 1. Komatsu: Japan, USA, Germany. 2. Toyota: Japan, USA. 3. TMC: Japan. 4. Mitsubishi: Japan. 5. Caterpillar: USA. 6. Linde: Germany 7. Kalmar: Germany 8. Hyster: Germany
In case of equivalent Fork Lifter is offered, then the previous ----
satisfactory supply record of offered Fork Lifter supplied and operated over Pakistan Railways under similar operating conditions must be provided.
12. To be provided 1. All manuals (operating, maintenance Comply
by the bidder: and service) 2. Original Manufacturing Certificate. 3. Dealer ship authorization certificate. 4. Items under warranty for replacement. 13 Note: Any extra information/guidance regarding ---- technical, performance, safety or working of Fork Lifter can be provided.