You are on page 1of 3

MARELLI CFC311 LAMBORGHINI

plugin 904
MARELLI CFC311 LAMBORGHINI

DIRECT CONNECTION
In order to connect to the ECU use the CABLE F32GN037C/D.
Make sure that the POWER led (red) on Trasdata is ON.

ECU CONNECTOR
MARELLI CFC311 LAMBORGHINI

DIRECT BOOT CONNECTION


Connect the GREY wire of the cable F32GN037C/D as described here below :

Connect a 1KOhm resistor as shown here below.


Remove the resistor before placing back the ECU into the vehicle.

You might also like