Professional Documents
Culture Documents
01 Introduction 009
01 Introduction 009
Introduction
Content
Introduction 1
General ................................................................................................................... 2
Documentation structure ......................................................................................... 3
General
You have here the Objects1 Manual for CEMAT V8.0 SP1. This manual is part of the
Reference Manual. It should support you in performing the work required to configure your
plant.
The Objects1 Manual is part of a comprehensive CEMAT V8.0 SP1 complete documentation.
In the current version V8.0 SP1, this consists of the volumes listed below.
Engineering
Manual
Reference Manuals
After the installation of CEMAT V8.0 SP1 the CEMAT documentation is available as PDL in
directory D:\CEMAT_CS\Docu
On the following pages you will find the content of each manual.
Documentation structure
The manuals contain the following chapters:
Engineering Manual
1 Introduction
2 Preparations
3 Installation of a PCS 7 Project
4 Assignments
5 Engineering Examples
6 PLC Engineering
7 AS-AS Coupling
8 OS Engineering
9. Engineering Tools
10 Engineering Check List
11 Project Administration
12 free
13 Graphic Templates
14 Tips&Tricks
15 Update Information
Reference - System
1 Introduction
2 Cemat System Architecture
3
4
5
6
Reference - Glossary
1 Introduction
2 Definitions and Instructions
Reference - Objects
1 Introduction
2 General
3 Unidirectional Drive
4 Bi-Directional Drive
5 Damper
6 Valve
7 Adapt
8 Annunciation Module
9. Annunciation Module with 7 Alarms
10
11
12 Measuring Value
13 Measured Value Integrator
14 Storage
15 Storage Multichamber
16 Silopilot
17 Group Module
18 Route Module
19 Selection
20 Interlock
21 Interlock 5
22 Object Data Acquisition
23 PID Controller
24 PID Controller with 3 Parameter sets
25 Polygon 3
26 CNT-Module
27 RT-Module
28 Related Objects
29 Analog Value Selection
30