Professional Documents
Culture Documents
Cone Crusher Concave Ring
Cone Crusher Concave Ring
As we all know, cone crusher concave ring and mantle play the most important role
in all the wearing parts of the cone crusher.
The wear rate and short working time are big problems for cone crusher, because
they are directly involved in the grinding of stones. The frequent replacement of
crusher spare parts not only shortens the effective running time of the sand and
gravel production line, but also increases the production cost.
When the stone powder content of the material is high, it must be passed through a
sieve before crushing, so that too much fine powder can be avoided during crushing;
when the material has high humidity, measures should be taken to reduce the
moisture content before crushing, such as mechanical drying. Measures such as
drying or natural drying.
The hardness of the material is different, and the degree of wear on cone crusher
concave ring and mantle is also different. The higher the hardness of the material,
the greater the impact load that the concave and mantle bear during the production
process, which will reduce the service life of the crusher. In addition to the hardness
of the material, it will affect the life, and the particle size of the material will also
affect it. The larger the particle size of the material inside the cavity, the more severe
the wear of the liner, which will reduce the service life of the crusher.
3. Feeding method.
The feeding method of the cone crusher will also affect the service life of concave
and mantle. If the feeding device of the crusher is improperly installed or there is too
much material when feeding, it will cause the crusher to feed unevenly and cause the
crushing the internal material is blocked, which makes concave and mantle bear too
much pressure, thereby increasing the wear of the ore on the inner wall, damaging
the liner, and reducing the service life.
The above three points are all external factors. The most important factor affecting
cone crusher concave ring and mantle is its own quality. At present, the raw
materials of concave and mantle of the market crusher are made of high manganese
steel and wear-resistant parts. The surface has high requirements, and no cracks and
casting defects that affect the performance are not allowed. With the development
of science and technology, the performance of wear-resistant materials has been
continuously improved. It is necessary to choose materials that can maintain their
original toughness under impact.