Professional Documents
Culture Documents
Symons 5-12 FT Cone Crusher
Symons 5-12 FT Cone Crusher
Short Head---With a relatively deep head, the parallel space of cavity is longer, if the
feed size is small, then the finer final products are produced. It can be conducted as
the second- or third-time crushing process. The same to standard head, each type of
short head cone crushers includes 4 different cavities which are fine, media, coarse
and extra coarse.
Recognizing that the Symons principle of crushing is the most efficient means of ore
and aggregate reduction in hard rock applications, the engineers used this same
principle in the design on the hydrocone.
The cavity design eccentric (head) speed and throw of the hydrocone are equivalent
to the Symons Cone Crushers.
The need for increased crushing capacity within the volume or space occupied by
existing crushers was one of the objectives in the design of the cone crusher.
Versatility in the form of having the ability to perform in a wide range of applications
without the need for a change in major assemblies was another objective in the
design. Ease of maintenance and remote setting capability also were part of the
design parameters the market requires.