Professional Documents
Culture Documents
TH 42LF60W
TH 42LF60W
ITD1311074CE
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Touch-Current Check -------------------------------------3
2 Warning --------------------------------------------------------------4
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------4
3 Service Navigation------------------------------------------------5
3.1. Service Hint--------------------------------------------------5
3.2. Applicable signals ------------------------------------------6
4 Specifications ------------------------------------------------------8
5 Service Mode -------------------------------------------------------9
5.1. CAT (Computer Aided Test) mode ---------------------9
5.2. IIC mode structure (following items value is
sample data)----------------------------------------------- 14
6 Troubleshooting Guide---------------------------------------- 15
6.1. Self Check ------------------------------------------------- 15
6.2. No Power--------------------------------------------------- 20
6.3. No Display ------------------------------------------------- 21
6.4. Abnormal Display ---------------------------------------- 22
7 Disassembly and Assembly Instructions --------------- 23
7.1. PCB Layout ------------------------------------------------ 23
7.2. Preparation ------------------------------------------------ 23
7.3. About disassembly and replacement --------------- 23
7.4. Back Cover removal ------------------------------------- 24
7.5. A-Board replacement------------------------------------ 25
7.6. P-Board replacement------------------------------------ 26
7.7. AC Inlet replacement ------------------------------------ 26
7.8. FR-Board and FR-Board Fixing Metal TOP/
BTM replacement ---------------------------------------- 27
7.9. GK-Board and Key Cover and Key Pad
replacement ----------------------------------------------- 27
7.10. Speaker and Stand bracket L/R replacement ----- 28
7.11. K-Board, LED Panel and LED Panel Case
replacement ----------------------------------------------- 29
7.12. Cabinet fixing Metal Top/Left/Right/Bottom
Left/Bottom Right replacement ----------------------- 30
7.13. LCD Panel replacement -------------------------------- 31
7.14. Caution about the sticking parts of LCD Panel --- 32
8 Block Diagram --------------------------------------------------- 34
8.1. Main Block Diagram ------------------------------------- 34
8.2. Power Board----------------------------------------------- 35
9 Wiring Connection Diagram --------------------------------- 36
9.1. Wiring Connection Diagram --------------------------- 36
10 Exploded View and Replacement Parts List ----------- 37
10.1. Exploded View -------------------------------------------- 37
10.2. Replacement Parts List --------------------------------- 38
2
TH-42LF6W_TH-42LF60W
1 Safety Precautions
1.1. General Guidelines
1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials.
2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the
wires have been broken or disconnected, do not attempt to repair or re-wire the units. Replace the entire wiring unit instead.
3. When conducting repairs and servicing, do not twist the Fasten connectors but plug them straight in or unplug them straight
out.
4. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or
damaged by the short circuit.
5. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly
installed.
6. After servicing, make the following leakage current checks to prevent the customer from being exposed to shock hazards.
3
TH-42LF6W_TH-42LF60W
2 Warning
2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensi-
tive (ES) Devices
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec-
trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and
semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage
caused by electrostatic discharge (ESD).
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your
body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap,
which should be removed for potential shock reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as alumi-
num foil, to prevent electrostatic charge buildup or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static (ESD protected)” can
generate electrical charge sufficient to damage ES devices.
5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or compara-
ble conductive material).
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material
to the chassis or circuit assembly into which the device will be installed.
Caution
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise ham less motion such as the brush-
ing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient
to damage an ES device).
4
TH-42LF6W_TH-42LF60W
3 Service Navigation
3.1. Service Hint
5
TH-42LF6W_TH-42LF60W
6
TH-42LF6W_TH-42LF60W
7
TH-42LF6W_TH-42LF60W
4 Specifications
8
TH-42LF6W_TH-42LF60W
5 Service Mode
5.1. CAT (Computer Aided Test) mode
To exit the CAT mode, turn the power off by the main unit or a remote control.
9
TH-42LF6W_TH-42LF60W
5.1.2. CD mode
Select the CD mode by Up/Down button on the remote control at the front page of CAT mode and then press the Mute button on
the remote control more than 3 seconds.
About the history display of SOS for the power supply system
• This unit adds the history display (5 times) of power supply failure to the CD mode as PTCT.
• By the self check of a signal system, only one history is displayed (After a self check disappears). But PTCT displays 5 times of
histories (Abnormality of the latest 3 times, first time and second time after shipment) and after a self check does not disappear.
You can see a detailed history of power failure sometimes.
* About the display contents of PTCT
PTCT : The position of [05] is the first time after shipment.
PTCT : The position of [04] is the second time after shipment.
PTCT : The position of [03] is second from last time.
PTCT : The position of [02] is last time.
PTCT : The position of [01] is the latest.
In [Contents & Check point] of [6.1.2. Power LED Blinking timing chart], the two-digit following PTCT are displayed by a hexadeci-
mal number.
10
TH-42LF6W_TH-42LF60W
5.1.3. SD mode
Select the SD mode by Up/Down button on the remote control at the front page of CAT mode and then press the Action button on
the remote control.
5.1.4. MS mode
Select the MS mode by Up/Down button on the remote control at the front page of CAT mode and then press the Mute button on
the remote control more than 3 seconds.
Caution:
Market Select should be set after exchange of A-Board.
Destination number
11
TH-42LF6W_TH-42LF60W
5.1.5. NW mode
Note :
To use the network function, set each "Network Setup" setting and make sure to set the "Control I/F Select" to "LAN" or
"RS232C".
Select the NW mode by Up/Down button on the remote control at the front page of CAT mode and then press the Action button
on the remote control.
12
TH-42LF6W_TH-42LF60W
5.1.6. ID mode
Select the ID mode by Up/Down button on the remote control at the front page of CAT mode and then press the Mute button on
the remote control more than 3 seconds.
13
TH-42LF6W_TH-42LF60W
14
TH-42LF6W_TH-42LF60W
6 Troubleshooting Guide
6.1. Self Check
6.1.1. Display Indication
1. Self-check is used to automatically check the bus line controlled circuit of the LCD display.
2. To get into the Self-check mode, press the volume down button on the right side of the unit, at the same time pressing the
OFF-TIMER button on the remote control, and the screen will show.
Note:
The line of the “ PTCT ” displays when you get into the Self-check mode for the first time only after the Power LED blinks.
15
TH-42LF6W_TH-42LF60W
16
TH-42LF6W_TH-42LF60W
How to Exit: The unit automatically turns off after around 10 seconds.
[Display pattern]
It is unfixed from which color it starts.
Test pattern
Output test pattern from A-Board
17
TH-42LF6W_TH-42LF60W
Yes
Is a test pattern It displays.
Failure of A-Board
displayed normally?
No
It is still abnormal.
Yes Yes
It is abnormal. If "FRAME CREATION" of It disappears.
Is a part abnormal "PICTURE" in On-Screen Failure of FR-Board
even in a test pattern? Menu is set to "OFF", does
symptom disappear?
LED blinking
Yes
A test pattern is not It is green lighting.
displayed but is the state Failure of A-Board
of LED green lighting? An image is
not displayed.
LED lighting
18
TH-42LF6W_TH-42LF60W
FRAME CREATION is the function to double the number of display segments of an image and
to show a fast moving scene more finely.
PICTURE
NORMALIZE NORMAL
PICTURE MENU STANDARD
BACKLIGHT 100
PICTURE 70
BRIGHTNESS 50
Colour 50
Tint 50
SHARPNESS 50
COLOR TEMP NORMAL
ADVANCED SETTINGS
19
TH-42LF6W_TH-42LF60W
6.2. No Power
20
TH-42LF6W_TH-42LF60W
6.3. No Display
21
TH-42LF6W_TH-42LF60W
22
TH-42LF6W_TH-42LF60W
23
TH-42LF6W_TH-42LF60W
24
TH-42LF6W_TH-42LF60W
25
TH-42LF6W_TH-42LF60W
26
TH-42LF6W_TH-42LF60W
27
TH-42LF6W_TH-42LF60W
28
TH-42LF6W_TH-42LF60W
29
TH-42LF6W_TH-42LF60W
30
TH-42LF6W_TH-42LF60W
31
TH-42LF6W_TH-42LF60W
32
TH-42LF6W_TH-42LF60W
Boss for VESA and Main board : Take them from previous LCD panel and put them on new LCD panel when replacing LCD
panel.
33
TH-42LF6W_TH-42LF60W
8 Block Diagram
8.1. Main Block Diagram
34
TH-42LF6W_TH-42LF60W
35
TH-42LF6W_TH-42LF60W
36
TH-42LF6W_TH-42LF60W
37
TH-42LF6W_TH-42LF60W
Safety Ref.No. Part No. Part Name & Description Pcs Remarks
1 TZZ00001223A Bezel 1
2 TZZ00001224A Rear Cover 1
3 TZZ00001218A Key Cover 1
4 TZZ00001221A Key Pad 1
5 TZZ00001228A Cabinet fixing Metal Top 1
6 TZZ00001229A Cabinet fixing Metal Left 1
7 TZZ00001230A Cabinet fixing Metal Right 1
8 TZZ00001231A Cabinet fixing Metal Bottom Left 1
9 TZZ00001232A Cabinet fixing Metal Bottom Right 1
10 TZZ00001233A Stand bracket -L 1
25 TZZ00001234A Stand bracket -R 1
11 TZZ00001235A FR Board Fixing Metal (Top) 1
12 TZZ00001236A FR Board Fixing Metal (Bottom) 1
13 TZZ00001202A Speaker 2
14 TZZ00001226A IR Board 1
15 TZZ00001213A LCD Panel 1
16 TZZ00001225A Power Board 1
17 TZZ00001216A Main Board(CBPCDS72XQ1) 1
18 TZZ00001227A Key Board 1
19 TZZ00001217A FR Board(PTPCDQ2X) 1
20 TZZ00001220A LED Panel (LENS_IR) 1
21 TZZ00001240A IO Label (VIDEO IN [bottom]) 1
22 TZZ00001241A IO Label (AUDIO IN [side]) 1
23 TEWF428 Aluminium Tape 2
24 TZZ00001286A Gasket 2
TZZ00001212A AC Inlet 1
26 N2QAYB000691 Remote Controller 1
27 TZZ00000710A Power Cord 1
27 TZZ00000724A Power Cord 1
27 TZZ00000722A Power Cord 1
33 TZZ00001364A Manual 1
33 TZZ00001378A CD Manual 1
TZZ00001353A Rating Label (Model Name Plate) 1
29 TZZ00001247A Cushion-TL 1
30 TZZ00001248A Cushion-TR 1
31 TZZ00001249A Cushion-B 1
28 TZZ00001365A Carton 1
32 TZZ00001250A PE Bag For Set 1
TZZ00001203A Cable (A3 - TC11) 1
TZZ00001204A Cable (TC02 - PANEL) 1
TZZ00001205A Cable (TC01 - PANEL) 1
TZZ00001208A Cable (A13 - SP) 1
TZZ00001209A Cable (CN903 - A2) 1
TZZ00001210A Cable (A4 - CN001) 1
TZZ00001206A Cable (A10 - CN201) 1
TZZ00001207A Cable (CN902 - CN1) 1
J TZZ00001194A SCREW 2
A TZZ00001197A SCREW 23
B TZZ00001200A SCREW 19
C TZZ00001252A SCREW 2
D TZZ00001195A SCREW 21
E TZZ00000669A SCREW 16
F TZZ00001199A SCREW 4
G TZZ00001198A SCREW 12
H TZZ00001201A SCREW 4
I TZZ00001196A SCREW 1
K TZZ00001321A SCREW 10
TZT4F011HGU PET TAPE KIT (20 TAPES IN 1KIT) 1 For Wire Fixing
TZT4F01TSUJ Double sided Tape 1 L:240mm , W:20mm
38
TH-42LF6W_TH-42LF60W
Model : TH-42LF60W
Safety Ref.No. Part No. Part Name & Description Pcs Remarks
1 TZZ00001222A Bezel 1
2 TZZ00001224A Rear Cover 1
3 TZZ00001218A Key Cover 1
4 TZZ00001221A Key Pad 1
5 TZZ00001228A Cabinet fixing Metal Top 1
6 TZZ00001229A Cabinet fixing Metal Left 1
7 TZZ00001230A Cabinet fixing Metal Right 1
8 TZZ00001231A Cabinet fixing Metal Bottom Left 1
9 TZZ00001232A Cabinet fixing Metal Bottom Right 1
10 TZZ00001233A Stand bracket -L 1
25 TZZ00001234A Stand bracket -R 1
11 TZZ00001235A FR Board Fixing Metal (Top) 1
12 TZZ00001236A FR Board Fixing Metal (Bottom) 1
13 TZZ00001202A Speaker 2
14 TZZ00001226A IR Board 1
15 TZZ00001214A LCD Panel 1
16 TZZ00001225A Power Board 1
17 TZZ00001215A Main Board(CBPCDS72XQ1) 1
18 TZZ00001227A Key Board 1
19 TZZ00001217A FR Board(PTPCDQ2X) 1
20 TZZ00001220A LED Panel (LENS_IR) 1
21 TZZ00001240A IO Label (VIDEO IN [bottom]) 1
22 TZZ00001241A IO Label (AUDIO IN [side]) 1
23 TEWF428 Aluminium Tape 2
24 TZZ00001286A Gasket 2
TZZ00001212A AC Inlet 1
26 N2QAYB000691 Remote Controller 1
27 TZZ00000710A Power Cord 1
27 TZZ00000724A Power Cord 1
27 TZZ00000722A Power Cord 1
33 TZZ00001364A Manual 1
33 TZZ00001378A CD Manual 1
TZZ00001354A Rating Label (Model Name Plate) 1
29 TZZ00001247A Cushion-TL 1
30 TZZ00001248A Cushion-TR 1
31 TZZ00001249A Cushion-B 1
28 TZZ00001365A Carton 1
32 TZZ00001250A PE Bag For Set 1
TZZ00001203A Cable (A3 - TC11) 1
TZZ00001204A Cable (TC02 - PANEL) 1
TZZ00001205A Cable (TC01 - PANEL) 1
TZZ00001208A Cable (A13 - SP) 1
TZZ00001209A Cable (CN903 - A2) 1
TZZ00001210A Cable (A4 - CN001) 1
TZZ00001206A Cable (A10 - CN201) 1
TZZ00001207A Cable (CN902 - CN1) 1
J TZZ00001194A SCREW 2
A TZZ00001197A SCREW 23
B TZZ00001200A SCREW 19
C TZZ00001252A SCREW 2
D TZZ00001195A SCREW 21
E TZZ00000669A SCREW 16
F TZZ00001199A SCREW 4
G TZZ00001198A SCREW 12
H TZZ00001201A SCREW 4
I TZZ00001196A SCREW 1
K TZZ00001321A SCREW 10
TZT4F011HGU PET TAPE KIT (20 TAPES IN 1KIT) 1 For Wire Fixing
TZT4F01TSUJ Double sided Tape 1 L:240mm , W:20mm
39