You are on page 1of 8

technology workshop craft home food play outside costumes

Toothpick Bridge
by Timothee Gillier on November 17, 2016

Table of Contents

Toothpick Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Intro: Toothpick Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Step 1: Gathering your Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Step 2: Drawing the Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Step 3: Placing the Plastic Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Step 4: Making the Basic Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Step 5: Making the Secondary Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Step 6: Making the Final Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Step 7: Placing the Side Pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Step 8: Taking the Bridge off From the Plastic Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Step 9: Assembling the Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Step 10: Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Related Instructables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Advertisements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

http://www.instructables.com/id/Toothpick-Bridge/
Intro: Toothpick Bridge
This is a cheap and easy project that only requires a small amount of materials. The Toothpick Bridge requires a lot of thinking and a good amount of construction.

Step 1: Gathering your Materials


You will not need a lot of materials and they are all super cheap and easy to find.
Graph Paper
Markers
Pencil
Bottle Cap
Multi Purpose Glue
Plastic Wrap
Toothpicks

Image Notes
1. Multi Purpose Glue
2. Plastic Wrap
3. Toothpicks
4. Bottle Cap
5. Graph Paper
6. Pencil
7. Marker

http://www.instructables.com/id/Toothpick-Bridge/
Step 2: Drawing the Design
1. Tape two pieces of graph paper together.
2. Sketch the bridge on to the paper with the pencil.
3. With different colored makers draw the Bridge showing the order you will glue the toothpicks.

Step 3: Placing the Plastic Wrap


1. Put the drawing of the bridge on a flat smooth surface.
2. Then lay the plastic wrap over it and tape it down you want the plastic wrap to be perfectly smooth.

http://www.instructables.com/id/Toothpick-Bridge/
Step 4: Making the Basic Structure
1. Cut the toothpicks to the right size.
2. Lay down all the toothpicks that are supposed to be vertical.
3. Put glue on the toothpicks.
4. Put the horizontal toothpicks that are on the basic structure.
5. Glue every thing together.

http://www.instructables.com/id/Toothpick-Bridge/
Step 5: Making the Secondary Structure
1. Place all the toothpicks on the secondary structure
2. Glue them all down.

Step 6: Making the Final Structure


1. Place all the toothpicks on the Final structure except for the long piece on the sides.
2. Glue them all down.
3. Make the two long pieces aside.
4. Let the bridge dry for at least 12 hours.

http://www.instructables.com/id/Toothpick-Bridge/
Step 7: Placing the Side Pieces
1. Place them on the side of the bridge.
2. Glue them down.
3. Let it dry for another 12 hours.

Step 8: Taking the Bridge off From the Plastic Wrap


1. Take the bridge off from the plastic wrap carefully.
2. Take of all the pieces of exes glue from the bridge.
3. Repeat steps 3-8 to make the other side of the bridge.

http://www.instructables.com/id/Toothpick-Bridge/
Image Notes
1. Take this off with a Knife
2. Take this also off

Step 9: Assembling the Bridge


1. Place the two bridge pieces parallel to each other one toothpick length from each other.
2. Place toothpicks between the two parts of the bridge.
3. Glue the toothpicks.
4. Let the Bridge dry for 12 hours.
5. Bridge Finished.

Step 10: Conclusion


This is a challenging and interesting project if you are looking for a more challenging and fun project this is perfect. I hope you liked it, Happy Building.

http://www.instructables.com/id/Toothpick-Bridge/
Related Instructables

Toothpick
Bridge Project One Piece How to Make a
How
Ukulele Neck by Boy and Girl Stable Brick bridge for
by hmiller11 To make a Toothpick
simple tooth funkleotto Mini Toothpick your nativity
Dolls by Structure by scene or
pick bridge by
DeandrasCrafts dbvinoff tabletop game
M.Bornhoft
by Caffeinomane

Advertisements

Comments
2 comments Add Comment

Anirudh Ralhan says: Nov 18, 2016. 5:33 PM REPLY


Awesome!!!!!

TheOrchidGirl says: Nov 18, 2016. 8:23 AM REPLY


Very cool!

http://www.instructables.com/id/Toothpick-Bridge/

You might also like