Professional Documents
Culture Documents
Simplified Procedure For Porosity
Simplified Procedure For Porosity
3. Cut the scaffold in to five small pieces and put each scaffold piece in to a beaker
5. Measure the length, breadth and height of each scaffold and note down the readings in the table
7. Add 30 ml of ethanol to the conical flask (given along with the vaccum filter)
9. Add one scaffold piece (e.g sample 1) in to the conical flask containing ethanol
11. Switch on the motor and apply the vaccum in to it for 5 minutes
12. After 5 minutes, take out the sample and keep it on a filter paper to blot out the excess ethanol for
one minute
13. Immediately weigh the wet weight and note down the readings
14. Measure the remaining ethanol in the conical flask ( If it is not 30 ml add some more ethanol and
make up to 30 ml).