Professional Documents
Culture Documents
SPECIFICATION:
Seite 1 von 10
THE GENERAL VIEW
The screen
The gripper
mounting on platform
*The USB port is used to update the computer control board's program, and can only be
operated by professionals who well knows this software program
Seite 2 von 10
The definition of soft keypad
UNIT: LBS/KG
SPEED: pulling speed, 1(lower),2(Middle),3 (High)
(Deviations possible due to the material of the string)
SOUND: 1(lower),2(Middle),0(Off)
KNOT: choose extra pounds added when KNOT(+10%)
PRE-STR: Select the pre-stretch percentage,
10%,15%,20%, 25%, off, cyclically.
LIMIT: This is means the hold-time.
1 mintue,2 mintues,3 minutes
What is the LIMIT (hold time): When a string pulled, but forgot
to release it, the program will release the string automatically
according to the set time (1 minute, 2 minutes, 3 minutes).
Seite 3 von 10
Enter: Select a parameter for modification or confirm the modified
operation.
+: In idle state (waiting for pulling interface), “+”to add the
tension setting.
Click to plus 0.1LB/0.1KG, press and hold on, plus 1LB/1KG
In the parameter setting interface, “+”to choose the
parameter or modify the value of parameter.
SAMPLE of SCREEN
Waiting for pulling interface:
Tension setting: 70 LBS
UNIT: Pounds
SPEED:3, fast
SOUND:1, lower
Pre-stretch: +25%
LIMIT (hold time): 2 minutes, the string will be released after 2 minutes pulled.
Seite 4 von 10
OPERATION
1\ INSTALLATION
mounting on platform
\ TURNING ON
Connect the power plug to
the socket, the power supply
is DC24V/4A
Turn on the switch to start the
tension control unit.
3\ SETTING TENSION
When power on and the self-test complete, the device waits for pulling
operation. If the default tension is not you needed, first choose pounds
or kilos. Then two ways to change the tension settings:
(1) \ Just click “+”or “-“ to change the tension, press and hold on for
fast changes.
(2) \ Click “MEM” to recall one of four tensions, to select one which is
nearly to your need. Then repeat the step (1).
If it is frequent used, just click “ENTER” to save the tension data in
the same position. See the bottom row.
Seite 5 von 10
4\ CHANGE/SETTING PARAMETERS
See the APPENDIX 1, the block diagram “How to modify the
parameters”
6\ KNOT OR NOT
Press to activate or deactivate the knot function. When the pilot
light is on, means the knot function is active. KNOT function means
adding pounds when pulling. The KNOT function is active only for one
time. After one pulling, the KNOT is deactivated automatically.
Seite 6 von 10
7\ PRE-STRETCH
Stringers often do this to with gut strings to remove some of the initial
elasticity of the string. Turning pre stretch “On” allows the tension
control unit to pull beyond the set tension and return to the set point.
Click “PRE STRETCH” button to choose the pre-stretch function (Select
the pre-stretch percentage, 10%,15%,20%, 25%, off, cyclically). For
example, stringing at 50 pounds with a 10% pre-stretch the device will
go to 55 pounds and then return to 50, the set tension.
8\ MEMORY (MEM)
Four frequently used tensions can be set and stored. Click “MEM”to
Select a tension, then click “+”or “-“ to change (press and hold on
for fast changes). To save it in memory, press “ENTER”, it is successful
saved when heard a double beep. The setting is now in memory and can
be recalled by pressing the “MEM”.
9\ CALIBRATION
The tension control unit is already set at the factory.
Seite 7 von 10
APPENDIX 8:
Seite 8 von 10
APPENDIX 9:
Seite 9 von 10
The jaws of the string gripper should always move smoothly. If this is not the
case, please drip machine oil (for precision mechanics) into the ball bearings
of the string gripper.
Clamps:
Please note that the black O-ring is an essential part of the clamps. Please do
not remove this under any circumstances!
Clamp base:
You must first lift the clamp and fix the string. Then the lever of the base clamp
can be closed to fix the base on the bar. To unlock the base, simply open and
drop the clamps.
Locking turntable:
To fix the position of the turntable, please turn the screw on the left under the
basket.
Please note that due to different production series, parts of this manual may not apply to your product.
Seite 10 von 10