Professional Documents
Culture Documents
Reference 20231016 0917
Reference 20231016 0917
Task History
Search Tasks
Fabrication of SU-8 derived three-dimensional carbon microelectrodes as high capacity anodes for
lithium - ion batterie
By: Mamidi, Suresh; Kakunuri, Manohar; Sharma, Chandra S.
It has been shown earlier that three-dimensional (3-D) electrode architecture facilitates higher energy and power d. than the planar
thin film based electrodes. In the present study, we fabricated S U-8 photoresist derived micro-patterned three-dimensional carbon-
based electrodes using photolithog. on stainless steel (S S) wafer used as a current collector. The preference of S S wafer over convent
ionally used silicon (Si) wafer is based on our previous study where use of S S wafer as a current collector enhanced the reversible
capacity of thin carbon films to almost double as compared to the thin films prepared on Si wafer. Asfabricated 3-D carbon electrodes
were then investigated for their electr ochem. performance. At 0.1 C- rate, Li- ion reversible capacity was found to be nearly 600 m Ah/g
after 165 continuous charge/discharge cycles. Nearly 100% coulombic efficiency and excellent cyclic stability confirms the potential use
of such 3-D micro-patterned carbon electrodes for next generation Li- ion batteries.
Journal