You are on page 1of 2

STANDARD VALUE TABLE FOR ELECTRICAL JUDGEMENT

SYS ‘esting
Judgement table
Measurement
Component tonnector No
ten lethod conditions

1) When using the short connector, the followin 1) Engine


results show that the sensor is defective started

CN405
Coolant level sensor
(Male) 1) The following results show that the sensor 1) Starting
is normal switch OFF

I Coolant level normal Max. 1 Q


I

I Coolant level abnormal 1 Min IMP 1

The following results show that the sensor 1) Starting


Coolant temperature is normal switch OFF
sensor CN402 2) Disconnect
(Coolant temperature (Male) CN402
gauge) I Ambient
temoerature I
When normal
I
(coolant
tempera-

Torque converter oil


temperature sensor CN453
35°C

20°C
I Approx.

Approx.
I
29kQ

52kQ
ture gauge)
3) Disconnect
CN453
(Torque converter oil (Male) I I (T/C oil
temperature gauge) 10°C Approx. 80kS tempera-
ture gauge)

1) When CN403 is connected to chassis ground, 1) Engine


the following results show that the sensor is started
defective

Engine oil pressure


CN403
sensor 1) The following results show that the sensor 1) Engine
is normal started

Engine oil pressure over


Min. IMQ
0.7 ka/cm2

I Engine oil pressure


0.7 ka/cm*
under
Max. 1 Q
I

The following results show that the sensor is 1) Starting


normal switch OFF
(Normal temperature 25°C) 2) Disconnect
CN423

Fuel level sensor CN423 CN423 (Male) @ - @


(fuel gauge) (Male)
Full Approx. 109 or less

Empty Approx. 859

20-9
sys- Measurement
Component Connector No. ~e~h~~ Judgement table
tern conditions
I I

I I
1) When CN452 (female) is connected to chassis 1) Engine
ground, the following results show that the started
SF
52 sensor is defective

Hydraulic oil CN452


temperature sensor (Male)
I ; I 1) The following
is normal
results show that the sensor 1) Starting
switch OFF

1) When CN404 (female) is contacted to chassis 1) Starting


ground, the following results show that the switch ON,
8:

Engine oil level CN404


sensor (Male)

I I
1) The following results show that the sensor 1) Starting
& switch OFF
is normal
g
9
0)
.E Engine oil level normal Max. 1 R
;
:
Engine oil level abnormal Min IMR
r”

20-10

You might also like