Professional Documents
Culture Documents
H-compact
PLUS
Strong performance in the smallest space.
H-compact PLUS.
First and foremost for any motor – you must be able to depend on it 100
percent. Or, put another way, the highest degree of reliability is demanded.
And it is precisely this aspect that distinguishes the H-compact PLUS. Based
2
At home in the process industry Some of the sectors where Typical applications include:
With power ratings up to 11.7 MW (IEC) and it is used: • Pumps
18,000 HP (ANEMA) and shaft heights up • Oil & Gas • Compressors
to 710 mm, H-compact PLUS is at home • Petrochemical • Blowers
everywhere in the process industry – where • Chemical • Extruders
it distinguishes itself as a result of its relia- • Mining/wastewater • Mixers, crushers
bility, low maintenance and efficiency. • Marine • Conveyor belts
• Cement • Main ship‘s drives
3
Leading edge technology for
the highest availability.
The reason that our H-compact PLUS motors offer the highest
4
Flexible.
But always appropriate.
Open-circuit, air-cooled/weather-protected:
1RA4/1RN4/1RN6/1RP6 motor
The cooling air is drawn in from the surroundings, routed through
the inside of the motor and discharged – for efficient cooling
without heat exchanger.
5
Reduce operating costs
with constant and variable speed.
Operated at constant speed the good electrical operating values – efficiency and
potential. When fed from a drive converter the motor speed – and therefore the
power drawn – can always be precisely adapted to the actual plant or system
6
Technical features
and power ranges
1RA4/1RN4/1RN6/1RP6 series
Power in MW 6 kV / 50 Hz
10 kV / 50 Hz
12
11
10
1
2 4 6 8 10
Pole number
and that from the very beginning. We are one of the world‘s leading
Subject to change without prior notice 01/07 | Order No. E20001-A120-P530-V1-7600 | DISPO 21506 | 21C9987 MK.LD.XX.LDHM.52.7.04 WS 01073. | Printed in Germany | © Siemens AG 2007
Further information at:
www.siemens.com/automation/partner
Siemens AG Siemens Energy & Automation, Inc. The information provided in this brochure contains merely general
descriptions or characteristics of performance which in case of
Automation and Drives 3333 Old Milton Parkway actual use do not always apply as described or which may change
Large Drives ALPHARETTA, GA 30005 as a result of further development of the products. An obligation
P.O. Box 47 43 USA to provide the respective characteristics shall only exist if expressly
agreed in the terms of contract.
90025 NUREMBERG
GERMANY All product designations may be trademarks or product names of
Siemens AG or supplier companies whose use by third parties for
www.siemens.com / h-compact-plus their own purposes could violate the rights of the owners.