Professional Documents
Culture Documents
1 4 8 12 15
Touch B to set the LOCATION text. Select appropriate gas and color code and touch save.
Touch a blank location label to enter new text, or choose Route each pair of signal input
2 5 9 an existing location label if the location has already been wires as shown to appropriate
Clear all Save Cancel set up. Touch save. terminals on input board(s).
entered text Touch the corresponding signal
point and touch save once the
13 point has been selected.
Clear all Cancel Note: Alarm may sound. Touch
entered text the mute button to silence the
alarm.
Mute Button
16
Heartbeat Alarm
Icon
Information History
Configuration
Enter master alarm location and touch save. 10
6
Select number of source locations for the above se-
3 lected gas (1 location per piece of source equipment)
Clear all After inputing source location, touch save, then select
entered Close the location to turn it green. Touch save.
text
14