Professional Documents
Culture Documents
Basic
Setting/Canceling Keylock
Push 1% of F.S. to 100% of F.S.
briefly
Alternate 6. Analog end point (20mA)
*1 Detection mode of output 2 is displayed as
when in window mode. Select using the buttons.
Alternate Setting range:
4. Switch-off point 2 Push 0% of F.S. to 100% of F.S.
briefly
Select using the buttons.
*2
Setting range: 0% of F.S. to Keylock: Press and hold MODE +r (or s) →"Loc" blinks.
Push (Switch-on point) -1% of F.S.
briefly Canceling Keylock: Press and hold MODE +r (or s) →"unL"
*2 Detection mode of output 2 is displayed as
when in window mode. blinks.
Select using the button
Alternate
Atmospheric Pressure Correction
Initialization Yes/No
Select using the buttons.
Push briefly Initialization is interrupted,
returns to main screen.
All items will be initialized.
Alternate
Function for correcting the measurement value to 0 due to problems Polarity of Control Output
Push briefly Select using the buttons.
such as long term use. NPN type
PNP type
Alternate
Correct the atmospheric pressure Select function of Output 2
Main screen Push and Push briefly Select using the buttons.
The screen will blink Control output
hold +
and the present pressure Finish settings Analogue output
will be corrected to 0.
Reference Pressing and r at the same time will return to the
previous screen.
• Always correct the atmospheric pressure by making the applied
pressure the same as regular room pressure.
• The air pressure correction is effective within a range of ±10 of F.S. If it is
executed outside of that range, “----” is displayed and no correction will occur.
• The atmospheric pressure correction is applied to the analog output as well.