Professional Documents
Culture Documents
5x45)
selec Operating Instructions
CONFIGURATION MODE
1. Enter by pressing the key 'M' for 3 sec.
OP271-V03
M
TIME SET MODE
S 1. Enter by pressing the key 'S' for 5 sec.
RST
600-DT 2. Press the key 'S' to select next digit.
3. If 'S' key is pressed when cursor is at the
On line Config. Front Reset right most position [ and the parameter
being set is not the last one ] the next
1 Process time Parameter name parameter is displayed. And if it is the last
2 Set time Parameter Options parameter then it exits the time set mode
3 Output Status ( Lit when O/P is ON ) and all parameters are stored in memory.
4 Time Range ( Blink in online Mode )
5 Operating Mode
Doc. Name : Operating / 1202 / 600-DT / OP271-V03
(Page 1 of 2)
TIME SET MODE MODE OF OPERATION
TERMINAL
CONNECTION A1 A2
15 25
16 18
COM
LOAD CONNECTION
MECHANICAL INSTALLATION
35.30mm
65.50mm
90mm
45mm