This document contains the text strings for an English language dictionary file used in software. It provides instructions on modifying the file and translating the strings to other languages. The file contains over 200 strings translated to English that are used in various parts of a programming software interface.
Original Description:
Arquivo Linguagem Software Gravadora Top 2048 Willem
This document contains the text strings for an English language dictionary file used in software. It provides instructions on modifying the file and translating the strings to other languages. The file contains over 200 strings translated to English that are used in various parts of a programming software interface.
This document contains the text strings for an English language dictionary file used in software. It provides instructions on modifying the file and translating the strings to other languages. The file contains over 200 strings translated to English that are used in various parts of a programming software interface.
; ;-When adding a new language, a new langugae file need to be created as same structure ; of English.dic.txt file. The new language file can also be created from the software ; under Setting->Language menu when Add a language dictionary file. ;-All translated text strings need to keep the same order as English.dic.txt file. ;-Always keep each string in one line. If the context needs a carriage return, place \r\n in the string. ;-You also can add the comment between lines. But not recommented. ; ;////////////////////////////////////////////////////////////////////////////////// //////////// ; IMPORTANT ; You may post/send the new language file to support@mcumall.com. So that let new software ; build include the new lanugage support and changes. ;////////////////////////////////////////////////////////////////////////////////// //////////// ; ; LanguageName=English ; ;Translated by <write your name here> ;Date:2008-07-25 ; 0001="File", 0002="Edit", 0003="View", 0004="Device", 0005="Command", 0006="Test H/W", 0007="Setting", 0008="Help", 0009="Open...", 0010="Save", 0011="Save As...", 0012="Exit", 0013="Find", 0014="Find Next", 0015="Fill Buffer Hex", 0016="Tool Bar", 0017="Status Bar", 0018="Device List", 0019="Read", 0020="Write", 0021="Blank Check", 0022="Erase", 0023="Get ID", 0024="Verify", 0025="Lock", 0026="Buffer Byte Swap", 0027="Read Data", 0028="Detect Hardware", 0029="Test H/W", 0030="Voltage Diagnostic", 0031="Programmer History", 0032="Language", 0033="Supported List", 0034="About USBPrg", 0035="No device selected.", 0036="Speed", 0037="Device Location", 0038="Adapter", 0039="Auto", 0040="DIP Setting", 0041="Message Log", 0042="Double Write", 0043="ID Check", 0044="No adapter required for DIP chip.", 0045="Available Language", 0046="Add", 0047="OK", 0048="Cancel", 0049="Not initialized", 0050="Did not get response from programmer.\r\nDemo only.", 0051="Error", 0052="Ready", 0053="Initialization failed. Please reconnect.", 0054="Blank check is cancelled at address:", 0055="Blank check is cancelled", 0056="Cancelled", 0057="Checksum", 0058="Read completed.", 0059="Read cancelled.", 0060="Erase completed.", 0061="The device data changed, to keep synced data you need reload the data from the device\r\n Do you want to reload the data from device?", 0062="Confirm", 0063="Code Buffer", 0064="Data", 0065="User ID", 0066="Not Supported.", 0067="Write OSCCAL Failed.", 0068="Erase Failed.", 0069="Function not supported on this device.", 0070="OR", 0071="This chip does not need erase.", 0072="Write failed", 0073="Are you sure?", 0074="Please wait...", 0075="Erasing...", 0076="Reading...", 0077="Writing...", 0078="Verifying...", 0079="Blank checking...", 0080="Detecting...", 0081="Offset setting wrong.", 0082="No device selected.", 0083="Device blank check failed at address: ", 0084="Chip is blank", 0085="Device is verified", 0086="Blank check failed", 0087="ID check skipped", 0088="ID check OK", 0089="ID check failed.", 0090="Please check device type, chip orientation and pin contact.", 0091="Continue?", 0092="Some OEM chips may have compatible chip ID", 0093="Yes", 0094="No", 0095="Elapsed time", 0096="seconds", 0097="Time", 0098="Device write completed", 0099="Device write cancelled", 0100="Address", 0101="Buffer", 0102="Device verify completed", 0103="Device verify cancelled", 0104="VerifyFailed", 0105="Initializing, please remove the chip from ZIF socket.....\r\nReconnect programmer if needed.", 0106="Device Selection/Search", 0107="Manufacture", 0108="My Favorite Devices", 0109="Search Device", 0110="Type", 0111="Tips: Always search for exact part number first. Then choose the closest part number.\r\n Example: Use AM2732A instead of 2732 if your chip is AM2732A", 0112="All", 0113="Device ID(Hex)", 0114="Revision", 0115="Device ID Information", 0116="Not in library", 0117="Unknown Device", 0118="Select", 0119="Data(Hex)", 0120="From Address(Hex) 0x", 0121="To Address(Hex) 0x", 0122="Fill Buffer With Data", 0123="Binary Search", 0124="Hex String(eg. E2 FB CD 00 21)", 0125="Text String(eg. Text String)", 0126="Direction", 0127="Up", 0128="Down", 0129="Match Case", 0130="New Search", 0131="Total programmed on this programmer", 0132="Most Recent List", 0133="File Offset", 0134="Device Offset", 0135="Protect and Unprotect", 0136="Sector Block Information", 0137="Single Sector", 0138="All Sectors", 0139="Clear", 0140="Protect", 0141="Unprotect", 0142="Protected", 0143="Unprotected", 0144="Address From", 0145="CFG Value(Hex)", 0146="Length In Byte(Dec)", 0147="Memory Type", 0148="Standard CFG Word Configuration", 0149="Direct Device Memory Access(DDMA)", 0150="(Absolate Byte Address)", 0151="Device Erase Options", 0152="Note: The OSCCAL value may be erased. \r\n Pls remember the OSCCAL value before erase.", 0153="Current OSCCAL = 0x", 0154="AVR Configuration Byte", 0155="Note: 0 will be writen on all checked box bit. \r\n 1 will be writen on all unchecked box bit.", 0156="Current Device:", 0157="Cal. Read", 0158="Write Completed", 0159="Incorrect clock source selected", 0160="Warning", 0161="Temp. Unprotect", 0162="JTAG Programming", 0163="User ID", 0164="File Information", 0165="Security", 0166="Read User Code", 0167="The device is not supported on this programmer version. \r\n You may need to upgrade the programmer or firmware.", 0168="Programmer", 0169="Software", 0170="USB Driver", 0171="Package", 0172="Unsupported programmer. Please try earlier version software.", 0173="Background Color", 0174="ID", 0175="Configuration", 0176="Value", 0177="Category", 0178="OFFSET", 0179="Print", 0180="Print Preview", 0181="Print Setup", 0182="Recent File", 0183="Load Extended Algorithm", 0184="Font", 0185="Close current GQScrip?", 0186="Split 16bit Buffer To Files", 0187="Combine Files To Buffer", 0188="New Script", 0189="Open Script", 0190="Save Script", 0191="Save Script As", 0192="Close Script", 0193="Other", 0194="Load last device and file when start up", 0195="File Format", 0196="Read Mode", 0197="Fill Mode", 0198="Ignore loaded file path.", 0199="Checking new software on server...\r\n", 0200="New version software is available on server.\r\n", 0201="Contacting software server failed.\r\n", 0202="Please download new software from server.\r\n", 0203="This software is updated already.\r\n", 0204="Show online software checking message", 0205="Checking and updating firmware...\r\n", 0206="Genuine Verification", 0207="Warranty Register", 0208="New chip support request", 0209="Not found?", 0210="Part Number:", 0211="Datasheet Link(http:)", 0212="Application field:", 0213="Data size exceed size of device, data file has been truncated.",